Best Floor Jack 2 Ton: Compare 10 Hydraulic Lifts

#1 · Best Overall

1. ARCAN A20017

• Load Capacity: 2 tons
• Material: Metal
• Weight: 50 lb
• Compatible with Vehicle Type: Car

Best for: Portable aluminum garage work.

Why it ranks #1: Its 2-ton capacity, 3.54-to-19.88-inch lift range and dual pump pistons suit varied service needs; aircraft-grade aluminum eases maneuvering.

Aircraft-grade aluminum gives the ARCAN A20017 a 50-pound listed weight while retaining a 2-ton rating, making maneuverability a central advantage for garage or mobile repair work. Its 3.54-to-19.88-inch range also spans low entry and substantial service lift for passenger vehicles.

The aluminum construction helps make this jack easier to move and transport than its lifting capacity alone might suggest, a practical fit for mobile repair setups. Dual pump pistons rapidly bring the saddle to the vehicle contact point, reducing the approach pumping needed before lifting. From a 3.54-inch minimum to a 19.88-inch maximum, its range accommodates low-clearance entry and higher service positioning. The 4,000-pound rating covers passenger vehicles, SUVs, and light trucks as stated, subject to the jack's capacity limit.

Skip it if you need a jack rated above 2 tons; the Powerbuilt 620422E also has a 2-ton rating, so it is not an upgrade for heavier loads.

Pick the ARCAN for garage or mobile work where moving a 50-pound jack matters alongside broad lift range. Its 2-ton ceiling still governs vehicle suitability, so it is not a solution for loads beyond its rating.

Listed on Amazon as: ARCAN 2-Ton (4,000 lb.) Aluminum Low Profile Floor Jack, Model A20017

#2 · Widest Lift Range

2. VEVOR Low Profile Jack

• Load Capacity: 3306.9 lb
• Material: Steel
• Weight: 62.5 lb
• Compatible with Vehicle Type: Car

Best for: Low-clearance sedan lifting.

Why it ranks #2: The 2.95-to-19.9-inch range accommodates low-clearance cars and offers substantial height; its dual-piston system is described as lifting quickly.

A 2.95-inch entry height lets the VEVOR floor jack slide beneath low-clearance sports cars and sedans, while its listed 19.9-inch reach provides substantial lift. The dual-piston pump is specified to reach full height in six unloaded pumps, a useful workflow advantage for frequent garage lifting.

The low 2.95-inch minimum height addresses access under low-profile cars, and the 19.9-inch maximum height offers room to raise a vehicle for service positioning. VEVOR says its dual-piston system reaches full height in six pumps unloaded and lifts four times faster than single-piston jacks, reducing pumping effort between jobs. Steel construction provides a sturdy frame, while the release valve and extended handle support controlled lowering. The listing identifies sports cars and sedans as intended vehicle types.

Skip it if you need a jack explicitly listed for trucks or want a lightweight aluminum model; the ARCAN A20017 weighs 50 pounds and uses aircraft-grade aluminum.

This VEVOR suits sedan and sports-car owners who value a low entry point and quick unloaded pumping in a garage. Check that the vehicle and lifting task fit its stated application and 2-ton capacity before choosing it.

Listed on Amazon as: VEVOR Low Profile Floor Jack, 2 Ton (4400 lbs) Capacity, Steel Racing Floor Jack with Dual Pistons Quick Lift Pump, Hydraulic Trolley Car Lift for Sports Cars, Sedans, Lifting Range 2.95-19.9 Inches

#3 · Low-Clearance Cars

3. AV Steel AV-202F

• Load Capacity: 2 tons
• Material: Alloy Steel
• Weight: 50.7 lb
• Compatible with Vehicle Type: Car

Best for: Low-profile coupe and sedan work.

Why it ranks #3: Its 3-3/8-to-16-7/8-inch range and dual-piston pump suit passenger and sports cars, while the listing cautions against trucks and SUVs.

A 3-3/8-inch minimum height positions the AV Steel jack for low-clearance passenger cars, coupes, hatchbacks, sedans, and sports cars. Its dual-piston pump and 16-7/8-inch maximum lift add quicker lifting and useful service height, while the listing expressly excludes trucks, SUVs, and RVs.

The low entry point can help the jack reach beneath the low-profile cars named in its application, and its 16-7/8-inch maximum offers more lift than a short-range car jack. AV Steel specifies a dual-piston pump, supporting a more efficient lifting workflow. Alloy-steel construction supplies the frame, and the 2-ton, 4,000-pound rating sets the load boundary. The product's own guidance excludes minivans and lifted vehicles as well as trucks, SUVs, and RVs, so it is a narrowly car-focused choice.

Skip it if you maintain an SUV or truck; the ARCAN A20017 is listed for SUVs and light trucks, unlike this car-focused jack.

Choose the AV Steel for a compatible low-profile passenger car when its low entry and dual-piston pump suit your maintenance routine. Its stated exclusions are unusually important: this is not the choice for trucks, SUVs, minivans, lifted vehicles, or RVs.

Listed on Amazon as: AV Steel Low Profile Floor Jack 2 Ton (4,000 lbs), Lift Range 3-3/8" to 16-7/8" for Passenger & Sports Cars, Hydraulic Steel Floor Jack with Dual Piston Pump – Not for Trucks, SUVs or RVs

#4 · Soft-Surface Use

4. Sunex Tools 6602RJ

• Load Capacity: 2 tons
• Material: Steel/Aluminum (hybrid)
• Weight: 63.6 lb
• Compatible with Vehicle Type: Car, Motorcycle, Snowmobile, Sport Utility…

Best for: Soft-ground and high-lift service.

Why it ranks #4: A 2-ton capacity and adjustable height up to 28.4 inches stand out; the listing specifically notes stability on gravel, sand and soft surfaces.

The SUNEX Tools 6602RJ reaches a listed 28.4-inch lift height and is reported to remain stable on gravel, sand, and soft surfaces. Its 2-ton capacity, big-wheel format, and four-position locking adjustable height make it relevant to off-road vehicle maintenance beyond ordinary garage floors.

The 4.7-inch minimum and 18.3-inch maximum jack range, with an adjustable 11.2-to-28.4-inch lift range, offer varied positioning for undercarriage access. Its four-position locking height adjustment lets the user set a raised position, while the full-length wrap-around steel skid plate is specified to provide stable support during lifting. The hybrid steel-and-aluminum construction combines the materials named in the listing, and the product is compatible with cars, motorcycles, snowmobiles, SUVs, and trucks. Stability on soft surfaces is a particular practical distinction.

Skip it if you prioritize a lighter jack for mobile transport; the ARCAN A20017 weighs 50 pounds and uses aircraft-grade aluminum.

Consider the SUNEX for off-road or workshop users who need high lift and support on loose surfaces, within its 2-ton rating. Its 63.6-pound weight makes frequent carrying a relevant trade-off for mobile work.

Listed on Amazon as: SUNEX Tools 2 Ton Big Wheel Jack, Model 6602RJ

#5 · Storage Case Included

5. BIG RED T82012

• Load Capacity: 2 tons
• Material: Alloy Steel
• Weight: 21.3 lb
• Compatible with Vehicle Type: Car

Best for: Case-stored car maintenance.

Why it ranks #5: This conventional 2-ton trolley jack lifts from 5-1/4 to 13-3/8 inches and includes a blow-mold carrying case for storage.

The BIG RED T82012 combines an included storage case with a 5-1/4-inch minimum height, making it a practical fit for organized garage storage and routine car access. Its 2-ton capacity and 13-3/8-inch maximum lift define a conventional range for suitable passenger cars.

The storage case offers a contained place to keep the jack between jobs, while the 21.3-pound listed weight makes it easier to handle than heavier shop models. A 5-1/4-inch minimum height allows entry under many cars, and the 13-3/8-inch maximum sets the service lift boundary. Its 4,000-pound rating suits loads within the 2-ton limit. The safety bypass system is specified to prevent overloading, and two large steel casters plus two 360-degree swivel casters aid positioning in a garage.

Skip it if you have a low sports car needing less than 5-1/4 inches of entry clearance; the VEVOR ZX0801 starts at 2.95 inches.

This BIG RED is suited to car owners seeking a case, caster maneuverability, and a 2-ton garage jack. Its 5-1/4-inch minimum height is the key fit boundary for low-profile vehicles, alongside the 13-3/8-inch lift ceiling.

Listed on Amazon as: BIG RED T82012 Torin Hydraulic Trolley Service/Floor Jack with Blow Mold Carrying Storage Case, 2 Ton (4,000 lb) Capacity, Red

#6

6. Pro-LifT PL2920

• Load Capacity: 2 Ton
• Material: Alloy Steel
• Weight: 30 lb
• Compatible with Vehicle Type: Car

Best for: Portable home-garage car lifting.

Why it ranks #6: Its 3-5/8-to-13-3/8-inch range, 30-pound listed weight, carrying handle and safety bypass make it a practical home-garage trolley jack.

A built-in carrying handle makes the Pro-LifT PL2920 easier to pick up and move around a home garage, while its 30-pound listed weight supports that portable role. Its 3-5/8-to-13-3/8-inch range and 2-ton capacity cover routine lifting for suitable cars.

The carrying handle and 30-pound weight make relocation around a garage simpler than handling a much heavier shop jack. Its 3-5/8-inch minimum height supports access beneath many cars, while the 13-3/8-inch maximum defines the available lift for service positioning. Heavy-duty steel construction and a 4,000-pound capacity set its structural and load class. Front wheels and rear swivel casters help maneuver it, while a safety bypass system is specified to prevent overloading during operation.

Skip it if you need substantially more lift height; the SUNEX Tools 6602RJ reaches a listed 28.4 inches.

The PL2920 suits a home-garage car owner who wants a manageable steel trolley jack with a carrying handle and caster maneuverability. Its 13-3/8-inch maximum makes it a limited fit for higher undercarriage access.

Listed on Amazon as: Pro-LifT PL2920 2 Ton Floor Jack

#7

7. BIG RED AT82012U-1

• Load Capacity: 2 tons
• Material: Alloy Steel
• Weight: 19.4 lb
• Compatible with Vehicle Type: Sport Utility Vehicle

Best for: Case-stored passenger-car service.

Why it ranks #7: The 2-ton steel jack lifts from 5-3/5 to 13 inches and includes a carrying case, but its range is narrower than higher-ranked options.

The included blow-mold carrying case gives the BIG RED AT82012U-1 a tidy storage and transport setup for home-car maintenance. Its 5.6-inch minimum height, 13-inch maximum lift, and 2-ton capacity target routine work on most cars, with the listing cautioning against SUVs and trucks.

The carrying case gives the jack a designated place between jobs, useful for keeping a garage or vehicle storage area organized. A 5-3/5-inch minimum height and 13-inch maximum height define its access and lift envelope, while the 4,000-pound rating covers suitable cars. Two large steel casters and two 360-degree swivel casters aid positioning; a carrying handle also helps move it. The safety bypass system is specified to prevent overloading, and the reinforced saddle adds a rigid load-holding structure.

Skip it if you service a truck or need a taller lift; the SUNEX Tools 6602RJ reaches 28.4 inches and lists truck compatibility.

This BIG RED fits a car owner who wants a case, maneuverable casters, and straightforward garage storage. Its modest 13-inch maximum and stated caution against SUVs and trucks make it a poor match for taller-vehicle work.

Listed on Amazon as: BIG RED 2 Ton Hydraulic Trolley Service/Floor Jack with Blow Mold Carrying Storage Case, 4000 lb Capacity, Blue

#8

8. DNA Motoring TOOLS-00234

• Load Capacity: 2 tons
• Material: Alloy Steel
• Weight: 9.75 kg
• Compatible with Vehicle Type: Car

Best for: Compact-car garage maintenance.

Why it ranks #8: It offers a 2-ton capacity and 5.1-to-13-inch lift range for cars, but the listing advises against pickups, trucks and oversized SUVs.

A 5.1-inch minimum saddle height lets the DNA MOTORING jack reach beneath many passenger cars with limited clearance. Its 2-ton capacity and 13-inch maximum lift suit routine garage service on cars within that limit, while the stated vehicle guidance rules out oversized SUVs and pickups.

The 5.1-to-13-inch lifting range gives this trolley jack a defined fit for low-clearance cars and ordinary service tasks, rather than taller vehicles. Its 2-ton capacity supports cars up to 4,000 pounds, and the alloy-steel construction provides the jack's structural material. DNA MOTORING lists overload protection and an easy jack position feature, supporting more controlled operation. Weighing 9.75 kilograms, it is a relatively manageable option to move around a home garage, though the listed use guidance excludes trucks and large SUVs.

Skip it if you need more than 13 inches of lift or service a pickup; the SUNEX Tools 6602RJ reaches 28.4 inches.

Choose this jack for routine home-garage work on a passenger car that fits its 2-ton rating and low starting height. Its 13-inch ceiling and explicit restriction on trucks and large SUVs make vehicle type and clearance central considerations.

Listed on Amazon as: DNA Motoring TOOLS-00234 Low Profile Hydraulic Trolley Service/Floor Jack, 2 Ton (4000 lbs) Capacity, Lifting Range 5.1"-13", Black

#9

9. Maxority MAX2001-1

• Load Capacity: 4E+3 lb
• Material: Alloy Steel
• Compatible with Vehicle Type: Car

Best for: Case-equipped home workshop.

Why it ranks #9: This 2-ton steel trolley jack includes a handle and storage case, but the supplied specifications do not state its lifting range.

A blow-mold carrying case comes with the Maxority 2-ton trolley jack, giving home and workshop users a ready way to store and carry the equipment. Its high-strength alloy-steel construction and hydraulic operation are specified for vehicle maintenance, though the listing provides no lifting range.

The 4,000-pound capacity identifies the jack's load class for suitable vehicle maintenance, while alloy-steel construction is described as high-strength for frequent use. Hydraulic operation is presented as a smooth, low-effort way to lift during repairs. The included handle supports operating the trolley jack, and its carrying case provides a storage option between jobs. Because no minimum or maximum lifting height is supplied, buyers cannot use the listing to judge low-clearance access or available service height; check the stated vehicle and task requirements independently.

Skip it if you must verify low-clearance access or maximum lift from stated dimensions; the Pro-LifT PL2920 lists a 3-5/8-to-13-3/8-inch range.

This Maxority is a candidate for a home or workshop user who values a case, handle, and hydraulic operation. Its missing lift-range dimensions limit advance fit checks, so it is less suitable when clearance or service height is decisive.

Listed on Amazon as: 2-Ton (4000 lbs) Hydraulic Trolley Garage Service/Floor Jack with Blow Mold Carrying Storage Case for sedans and Pickup Trucks Home and Workshop Vehicle Maintenance

#10

10. Powerbuilt 620422E

• Load Capacity: 2 tons
• Material: Metallic-Fiber
• Weight: 79.2 lb
• Compatible with Vehicle Type: Car

Best for: Multi-vehicle shop lifting.

Why it ranks #10: Its 2-ton triple-lift design serves varied equipment including cars, motorcycles and ATVs, but it is a specialty format rather than a conventional car jack.

Powerbuilt's patented Triple Lift design is specified for cars, trucks, motorcycles, ATVs, transmissions, lawnmowers, and snowmobiles, letting one jack serve varied shop tasks. Its 2-ton capacity and locking safety bar make it a specialty alternative to a car-only trolley jack.

The Triple Lift format is the key practical distinction: the listing names both vehicles and equipment such as transmissions and lawnmowers, broadening the work it can cover. That versatility can reduce the need to select a separate jack for each listed application. A locking safety bar provides a specified mechanical safety feature during use, and the 2-ton rating establishes the maximum capacity boundary. Powerbuilt also says the jack is tested and certified to meet or exceed ASME and PALD standards; its 79.2-pound weight is a consideration for moving it around a shop.

Skip it if you want a lighter, conventional car jack for routine garage moves; the Pro-LifT PL2920 weighs 30 pounds and includes a carrying handle.

Choose the Powerbuilt for a shop handling varied listed vehicles and equipment, especially when one lifting tool must cover more than passenger cars. Its 2-ton limit and 79.2-pound weight deserve attention before regular repositioning.

Listed on Amazon as: Powerbuilt 2 Ton Triple Lift Floor Jack, Lifts Cars, Trucks, Motorcycles, ATV's, Transmissions, Tie-Down Loops, Locking Safety Bar – 620422E