Best Driver Side Tail Light Assembly for Vehicle-Specific Fitment

#1 · Best Overall

1. Boine F-150 Tail Light

• Lens Material: Polycarbonate
• Compatible with Vehicle Type: Truck
• Wattage: 54 W

Best for: F-150 night-driving replacement.

Why it ranks #1: Fits the F-150 across three model years and includes a bulb and harness; the listing also specifies direct plug-and-play installation and sealed waterproof construction.

A bulb-and-harness-included package gives this Boine left tail light a ready-to-connect setup for 2018–2020 Ford F-150 trucks. Its direct plug-and-play installation can simplify replacement, while the included bulb and evenly distributed illumination support night-driving visibility without sourcing a bulb separately.

The 12-volt assembly pairs a polycarbonate lens with a sealed, waterproof construction, helping it remain operational in heavy rain. Chrome housing and a clear lens provide the listed finish, while the included bulb and harness support a more complete replacement workflow. Boine specifies direct plug-and-play installation, but supplies no installation guide; buyers without repair experience may want an installation video or professional help. Its stated fit is limited to 2018–2020 F-150 models.

Skip it if you need a supplied installation guide; this package recommends finding a video or using professional installation.

A practical match for F-150 owners replacing the left rear lamp on a 2018–2020 truck who want the bulb and harness included. Its application is limited to those model years, and installation guidance must be sourced separately.

Listed on Amazon as: Boine F150 Tail Light Compatible With 2018 2019 2020 Ford F150 F-150 Left Driver Side Rear Light Brake Lamp – Bulb and Harness Included Replace JL3Z13405H

#2 · Harness Included

2. JSKAPA F-150 Tail Light

• Lens Material: Polycarbonate
• Compatible with Vehicle Type: Truck
• Wattage: 27 W

Best for: F-150 trim-specific halogen lamp.

Why it ranks #2: Targets F-150 trims across three model years, replaces JL3Z-13405-H, and lists high-quality halogen bulbs with a pre-installed harness.

Pre-installed harness and halogen bulbs give this JSKAPA left tail lamp a ready-to-install package for specified 2018–2020 Ford F-150 trims. Its fit list includes XL through Limited models, enabling buyers within that range to target a trim-specific replacement with illumination components already supplied.

JSKAPA lists compatibility with 2018–2020 F-150 XL, XLT, King Ranch, Lariat, Platinum, and Limited models, making its application particularly clear for those trims. A pre-installed harness and included halogen bulbs can reduce separate parts sourcing and connection steps. The polycarbonate lens is paired with dustproof and waterproof features, addressing exposure to debris and moisture at the rear of the truck. The listing also identifies it as a replacement for the JL3Z-13405-H reference.

Skip it if you own an F-150 outside the 2018–2020 range; this application does not list other model years.

A good match for owners of the listed 2018–2020 F-150 trims who want a left lamp with bulbs and harness ready. Its compatibility range is limited to those model years and named trims, so it is not a broader F-150 fit.

Listed on Amazon as: Driver Side Tail Light Assembly Compatible with Ford F-150 2018-2020 With Bulb and Harness Left Tail Lamp

#3 · Broad Truck Fitment

3. Boine Silverado Tail Light

• Lens Material: Polycarbonate
• Compatible with Vehicle Type: Truck
• Wattage: 12 W

Best for: Silverado multi-trim replacement.

Why it ranks #3: Covers several Silverado series and model years, includes a bulb and harness, and specifies waterproof construction; its listing notes important bed-style exclusions.

Compatibility spanning several Silverado 1500, 2500, HD, and 3500 applications makes this Boine driver-side tail light useful for a defined range of older trucks. The included bulb and direct plug-and-play connection can reduce sourcing and wiring steps during a replacement, while waterproof construction addresses wet-weather use.

Boine lists fit for 2003–2006 Silverado 1500 and 2500 models, their specified HD versions, and 2004–2006 Silverado 3500 trucks. A bulb is included, and the direct plug-and-play design supports a simpler installation workflow. The polycarbonate lens and sealed waterproof construction are intended to withstand rain, while the ABS plastic housing provides a durable structure. The fit notes specifically exclude 2003 Silverado 3500 HD and Stepside bed models, an important boundary to check.

Skip it if you have a 2003 Silverado 3500 HD or a Stepside bed model; those applications are explicitly excluded.

This suits owners of the listed 2003–2006 Silverado truck applications who want a bulb-included, plug-and-play replacement. Check the stated model-year and body-style boundaries carefully, especially the exclusions for 2003 3500 HD and Stepside beds.

Listed on Amazon as: Boine Left Driver Side Tail Light Compatible With 2003 2004 2005 2006 Chevy Silverado 1500 2500 3500 Factory Style Tail Light – Bulb and Harness Included

#4 · Wide Colorado Range

4. Nakuuly Colorado Tail Light

• Lens Material: Acrylic
• Compatible with Vehicle Type: Truck
• Wattage: 10 W

Best for: Colorado halogen replacement.

Why it ranks #4: Fits halogen Colorado applications across eight model years, includes bulbs, and lists plug-and-play installation with an IP67 waterproof specification.

Coverage across 2015–2022 Chevy Colorado halogen applications gives this Nakuuly left-side assembly a broad stated model-year range. Its plug-and-play installation requires no modifications, helping simplify a direct replacement, while included bulbs mean the package supplies more than a bare housing for the rear lamp repair.

The assembly is specified for 2015–2022 Chevrolet Colorado halogen-type applications and includes bulbs, giving buyers a defined truck and lighting configuration to check against. Its direct plug-and-play installation requires no modifications, supporting a straightforward replacement workflow. ABS and PP construction, an acrylic lens, and IP67 waterproofing are listed; those features address impact resistance and wet-weather exposure. The 12-volt, 10-watt specification further identifies the lamp’s electrical details for the intended application.

Skip it if you have a Colorado with a non-halogen lighting setup; this assembly is listed for halogen-type applications.

A sensible option for Colorado owners replacing the left rear lamp on a 2015–2022 halogen-type truck and wanting bulbs included. The stated fit is specific to that lighting configuration, so other Colorado setups fall outside its listed application.

Listed on Amazon as: Tail Light Compatible With 2015-2022 Chevy Colorado Left Side

#5 · LED Option

5. STRECOS Traverse LED Tail Light

• Lens Material: Plastic
• Compatible with Vehicle Type: 2018-2021 Traverse High Country, L, LS, LT…

Best for: Traverse LED replacement.

Why it ranks #5: A left-side LED replacement for multiple Traverse trims, with specified replacement numbers, 12-volt operation, and a one-year manufacturer warranty.

LED construction distinguishes this STRECOS left tail light for 2018–2021 Chevrolet Traverse models, including L, LS, LT, Premier, RS, and High Country trims. Its direct-replacement, plug-and-play approach can simplify fitting within that stated range, while dustproof and waterproof features address exposure during everyday driving.

STRECOS identifies a 2018–2021 Traverse application across six trims and describes the lamp as a direct replacement, helping buyers narrow the fit by both year and model. The LED assembly uses a 12-volt direct-current specification, relevant when matching the vehicle’s electrical setup. Plastic lens construction and dustproof, waterproof features suit a rear lamp exposed to road conditions. The package includes one left driver-side LED assembly, with a one-year manufacturer warranty stated.

Skip it if you need a pair of rear lamps in one package; this listing includes one left driver-side assembly.

This fits Traverse owners replacing the left LED lamp on a listed 2018–2021 trim who want a plug-and-play replacement. It is a single-side assembly, and the specified vehicle range does not extend beyond those years and trims.

Listed on Amazon as: LED Tail Light Compatible with Chevy Traverse 2018 2019 2020 2021

#6

6. CHELANGHU Jetta Tail Light

• Lens Material: Plastic
• Compatible with Vehicle Type: For Volkswagen Jetta 2015 2016 2017 2018
• Wattage: 55 W

Best for: Jetta all-weather replacement.

Why it ranks #6: Specifies left-side fitment for several Jetta model years, replacement number 5C6945095G, halogen bulbs, and dustproof, waterproof construction.

A sealed, waterproof and dustproof structure is the defining practical feature of this CHELANGHU left tail light for 2015–2018 Volkswagen Jetta models. Its halogen bulbs are included, helping complete the replacement package, while the stated shatterproof and shockproof construction addresses rough weather and everyday road exposure.

The listing specifies a left-side fit for 2015–2018 Volkswagen Jetta and identifies the replacement reference 5C6945095G, helping buyers check the intended application. Included halogen bulbs support a more complete repair without sourcing that component separately. Waterproof, dustproof, shockproof, and corrosion-resistant construction is listed alongside tough, shatterproof material and light transmittance for rain, snow, and dense fog. The product is explicitly aftermarket, not an original part, which matters to buyers seeking OE sourcing.

Skip it if you require an original Volkswagen part; this listing identifies the assembly as aftermarket.

A match for Jetta owners seeking a left-side halogen assembly with bulbs and weather-resistant features for 2015–2018 models. It is an aftermarket product, so buyers requiring an original Volkswagen component should choose a different source.

Listed on Amazon as: Outer Left Driver Side Tail Lights Assembly for 2015 2016 2017 2018 Volkswagen VW Jetta Taillights, Rear Brake lights Lamps, with Halogen Bulbs, 5C6945095G

#7

7. Dasbecan Elantra Tail Light

• Lens Material: Polycarbonate
• Compatible with Vehicle Type: 2011-2013 Hyundai Elantra

Best for: Elantra UV-resistant replacement.

Why it ranks #7: Fits the Elantra across three model years and replaces 924013Y000; the listing specifies plug-and-play installation and precise OEM dimensions and mounting points.

Ultraviolet resistance that prevents yellowing is the notable feature of this Dasbecan left tail lamp for 2011–2013 Hyundai Elantra models. The plug-and-play assembly requires no modification, helping simplify installation, while its stated OEM dimensions and mounting points support alignment with the vehicle’s factory fit.

Dasbecan lists compatibility with 2011–2013 Hyundai Elantra and describes precise OEM dimensions and mounting points, supporting alignment during installation. Its plug-and-play design requires no modification, reducing steps for a direct replacement. The polycarbonate lens is specified with dustproof, shockproof, and waterproof features, and the UV-resistant construction is stated not to turn yellow. This is a halogen rear lamp for the left driver side, so the year, side, and lighting type are relevant fit considerations.

Skip it if you need an LED replacement; this Dasbecan assembly is specified as a halogen rear lamp.

This suits Elantra owners replacing the left halogen lamp on a 2011–2013 model who value plug-and-play installation and factory-dimension alignment. Its application is limited to the listed years and halogen configuration.

Listed on Amazon as: Dasbecan Tail Light Compatible with 2011-2013 Hyundai Elantra

#8

8. DEPO 320-1905L-AS Tail Light

• Lens Material: Polycarbonate or Acrylic
• Compatible with Vehicle Type: Car

Best for: DOT-compliant aftermarket fit.

Why it ranks #8: A driver-side aftermarket assembly described as DOT-compliant and test-fitted, with a one-year limited warranty; exact vehicle fitment still needs verification.

DOT-regulation compliance paired with test fitting is the central appeal of this DEPO driver-side assembly, supporting a replacement choice with documented fitment checks. It is explicitly an aftermarket spare part, making that distinction important for buyers seeking a non-OE replacement rather than an automaker-sold component.

DEPO states that the assembly complies with applicable DOT regulations and has been test fitted to ensure proper fitment, supporting buyers who want both a regulatory claim and a fit check. Its waterproof feature and red polycarbonate-or-acrylic lens specification suit a rear-light replacement exposed to the elements. The listing clearly identifies it as an aftermarket product, not one created or sold by the original vehicle maker, so buyers should be comfortable with that sourcing distinction.

Skip it if you require a tail light made or sold by the vehicle’s original equipment company rather than an aftermarket spare part.

A fit for buyers prioritizing a test-fitted aftermarket assembly with stated DOT compliance and waterproofing. The listing does not establish a vehicle model application here, and it explicitly distinguishes the product from an automaker-made or sold part.

Listed on Amazon as: DEPO 320-1905L-AS Replacement Driver Side Tail Light Assembly (This product is an aftermarket product. It is not created or sold by the OE car company)

#9

9. Dorman 1611230 Tail Light

• Lens Material: Glass
• Compatible with Vehicle Type: Truck
• Wattage: 55 W

Best for: Original-dimension truck repair.

Why it ranks #9: Dorman describes an original-style driver-side replacement with rigid plastic protection and a limited lifetime warranty, but the supplied data omits compatible vehicle applications.

Matching the original assembly’s exact dimensions is the key feature of this Dorman driver-side tail light, enabling a replacement intended for a proper fit on specific vehicles. Rigid plastic construction adds protection against weather and road conditions, making it a candidate for a stock-style truck repair.

Dorman says this assembly is made to look and function like the original part on specific vehicles, and its exact-original-dimension construction supports a stock-style replacement workflow. Rigid plastic is specified to protect against weather and road conditions, a practical consideration for a truck’s exposed rear lighting. The 12-volt, 55-watt assembly has a red glass lens. Vehicle application remains specific rather than universal, so buyers need to establish compatibility for their truck before ordering.

Skip it if you need a clearly listed model-year application; this description identifies compatibility only as vehicle-specific.

This suits a truck owner seeking a stock-style replacement with original-dimension fit and rigid weather-protective construction. The listing describes compatibility as specific to certain vehicles, so its application needs to match your truck before purchase.

Listed on Amazon as: Dorman 1611230 Driver Side Tail Light Assembly

#10

10. Dorman 1611600 Tail Light

• Lens Material: Plastic
• Compatible with Vehicle Type: Car
• Wattage: 35 W

Best for: Stock-style car lamp repair.

Why it ranks #10: The listing describes a driver-side replacement with original dimensions and a limited lifetime warranty, but supplied fitment information does not identify compatible vehicles.

Exact-original-dimension construction is the practical draw of this Dorman driver-side tail lamp, helping support a stock-style replacement fit on specific cars. Its rigid plastic housing material is described as protective against weather and road conditions, suiting owners who want an original-like repair rather than a universal lamp.

Dorman describes this assembly as one that looks and functions like the original on specific vehicles, with dimensions matched to the original for a proper fit. That can streamline a replacement workflow when the application is correct. The plastic lens and listed waterproof feature address everyday exposure, while the 12-volt, 35-watt specification identifies its electrical requirements. Because the fit is vehicle-specific, this is not a general-purpose lamp for cars outside its applicable list.

Skip it if you need an explicitly named vehicle application in this listing; the supplied details describe fit as vehicle-specific.

This is aimed at car owners seeking a stock-style, original-dimension replacement with a waterproof feature. Its fit is restricted to specific vehicles, so confirm that the applicable vehicle list matches your car before choosing it.

Listed on Amazon as: Dorman 1611600 Driver Side Tail Light Assembly