Best 4X100 16 Inch Wheels for Different Fitment Needs

#1 · Best Overall

1. Enkei EDR9

• Size: 16 inch
• Material: Aluminum
• Compatible with Vehicle Type: Passenger Car

Best for: Dual-pattern Enkei upgrade.

Why it ranks #1: Its 16×7 size, +38 offset, and 4×100/108 PCD are clearly listed, giving buyers several key fitment details for a 4×100 setup.

The Enkei EDR9 pairs a 16×7 size with a +38 offset and dual 4×100/108 bolt patterns, giving buyers a specific fitment combination to check against their passenger car. Its black-painted aluminum construction brings a dark finish to an aftermarket wheel while retaining the listed 16-inch diameter.

The 4×100/108 PCD gives this wheel two listed bolt-pattern options, useful when checking compatibility across passenger-car fitments; the +38 offset and 7-inch width add the key dimensions needed for a more complete fitment check. Aluminum construction keeps the material specification clear, while the black paint finish provides a coordinated appearance. The listing identifies a 16-inch wheel and passenger-car compatibility, but does not provide a hub-bore measurement or a complete vehicle fitment list.

Skip it if you need a listed hub-bore measurement; the Circuit Performance CP23 specifies a 73.1mm bore.

Choose this Enkei for a passenger car when its 16×7 dimensions, +38 offset, and 4×100/108 pattern match your fitment requirements. Its black finish is the visual draw; check the vehicle-specific dimensions beyond those listed before installation.

Listed on Amazon as: 16×7 Enkei EDR9 (Matte Black) Wheels/Rims 4×100/108 (441-670-1138BK)

#2 · Lightweight Pick

2. Circuit Performance CP22

• Size: 16
• Material: Aluminum
• Compatible with Vehicle Type: Passenger Car

Best for: Lightweight bronze tuner wheel.

Why it ranks #2: This 16×7, 4×100 wheel has a +35mm offset and a listed approximate weight of 15.55 pounds per wheel.

At approximately 15.55 pounds, the Circuit Performance CP22 is the lightest wheel in this selection with a stated per-wheel weight, making weight-conscious comparisons straightforward. Its 16×7 size, 4×100 pattern, and +35 offset accompany a flat-bronze Spoon SW388-style design for buyers seeking that combination.

The specified 16×7 dimensions, 4×100 bolt pattern, and +35 offset give buyers concrete measurements for checking fitment. Its approximately 15.55-pound weight can also make handling each wheel during installation more manageable than a heavier wheel, though it does not by itself establish a vehicle-performance result. The package includes one wheel and one center cap, not a set. Tuner-style lug nuts with 60-degree conical seating are required, so installation planning should account for that hardware.

Skip it if you need a set supplied together; the ROTA GRID RACING listing also specifies a single wheel per piece.

Pick the CP22 if you want a flat-bronze, Spoon SW388-style wheel and value its stated low per-wheel weight. It is sold one at a time, and the required 60-degree conical-seat tuner lug nuts must be planned separately.

Listed on Amazon as: Circuit Performance CP22 16×7 Flat Bronze 4×100 +35mm Offset Wheels Spoon SW388 Style Rims compatible with Honda Civic, Acura Integra, Mazda Miata

#3 · Bronze Finish

3. ROTA Grid Racing

• Size: 16 in
• Material: Aluminum
• Compatible with Vehicle Type: Passenger Car

Best for: Bronze ROTA fitment details.

Why it ranks #3: It lists a 16×7 size, 4×100 PCD, +40mm offset, 67.1mm hub, and included center caps.

The ROTA GRID RACING lists a 67.1mm hub alongside its 16×7 size, +40 offset, and 4×100 pattern, giving buyers several concrete dimensions to compare before choosing a wheel. Its full royal sport bronze finish and included center caps complete the stated package details.

The 4×100 pattern, +40 offset, and 67.1mm hub measurement together support a more informed fitment check than bolt pattern alone. At 16×7, the wheel has clearly stated diameter and width, while its approximately 15.4-pound weight helps buyers compare per-wheel handling during installation. The aluminum wheel includes center caps, so those components are accounted for in the listed package. The product description specifies a single wheel per piece, making quantity an important consideration when planning a full set.

Skip it if you need a set in one purchase; the ROTA SLIPSTREAM listing also specifies a single wheel per piece.

This GRID RACING suits buyers seeking a bronze ROTA with a stated 67.1mm hub measurement and 4×100 fitment details. It is sold individually, so plan the quantity needed and verify the listed dimensions against the vehicle.

Listed on Amazon as: GRID RACING (16X7 ET40 4X100 67.1 Hub) FULL ROYAL SPORT BRONZE

#4 · Gunmetal Finish

4. Circuit Performance CP23

• Size: 16 inch
• Material: Metal
• Compatible with Vehicle Type: Passenger Car

Best for: Gun-metal tuner-style choice.

Why it ranks #4: Its 16×7 size, 4×100 bolt pattern, +35mm offset, and 73.1mm hub bore are specified; listed weight is about 17.9 pounds.

A 73.1mm hub bore is the Circuit Performance CP23’s clearest fitment detail, giving buyers a specific measurement to compare with their vehicle. The 16×7 wheel combines a 4×100 pattern and +35 offset with gloss gun metal, and its listed 17.9-pound weight offers a concrete point of comparison.

The 4×100 bolt pattern and +35 offset identify key fitment dimensions, while the 73.1mm hub bore adds another measurement for checking compatibility. At approximately 17.9 pounds per wheel, the stated weight helps buyers compare handling and installation demands without relying on an unstated performance claim. Its clean, single-drilled four-lug center keeps the design simple. Installation requires tuner-style lug nuts with 60-degree conical seating, so include that hardware requirement in the wheel-change plan.

Skip it if you want the listed lightest option here; the Circuit Performance CP22 is specified at approximately 15.55 pounds per wheel.

This CP23 suits a buyer seeking a gloss gun-metal, 16×7 wheel with a 4×100 pattern and explicit hub-bore data. Check vehicle fitment and plan for the required 60-degree conical-seat tuner lug nuts before installation.

Listed on Amazon as: Circuit Performance CP23 16×7 Gloss Gun Metal 4×100 [+35mm] Wheels JDM Type R Style compatible with Honda Civic, Acura Integra, Mazda Miata

#5

5. ROTA Slipstream

• Size: 16 in
• Material: Aluminum
• Compatible with Vehicle Type: Passenger Car

Best for: Steel-gray ROTA styling.

Why it ranks #5: This 16×7 wheel lists 4×100, +40mm offset, and a 67.1mm hub, with center caps included.

The ROTA SLIPSTREAM combines a 16×7 size and +40 offset with a 4×100 pattern and 67.1mm hub measurement, making its core fitment figures easy to compare. Its full royal steel gray finish gives this aluminum wheel a distinct alternative to the bronze finish in the lineup.

The listed 4×100 pattern, +40 offset, and 67.1mm hub measurement give buyers several useful points for checking compatibility, while the 16×7 size states both diameter and width. Its aluminum construction and included center caps clarify the material and package contents. The wheel is identified as one piece rather than a four-wheel set, so buyers replacing all four wheels should account for separate quantities. The listing does not state a specific per-wheel weight for this model.

Skip it if you prioritize a stated low per-wheel weight; the ROTA GRID RACING lists approximately 15.4 pounds.

Choose the SLIPSTREAM for a steel-gray ROTA with a 16×7 profile and listed hub measurement. Its fitment figures aid comparison, but it is sold as an individual wheel, so factor in quantity when planning a full set.

Listed on Amazon as: ROTA Wheels SLIPSTREAM (16X7 ET40 4X100 67.1 Hub) FULL ROYAL STEEL GRAY

#6

6. KÖNIG Incident

• Size: 16" x 7"
• Material: Aluminum
• Compatible with Vehicle Type: Passenger Car

Best for: Graphite machined 4×100 wheel.

Why it ranks #6: The listing specifies a 16×7 aluminum wheel with a 4×100 pattern and graphite finish, though it omits offset and hub measurements.

The Konig Incident combines a 16×7 size with a 4×100 bolt pattern, giving buyers a straightforward set of core dimensions for a passenger-car fitment check. Its graphite machined finish offers a two-tone visual treatment, while aluminum construction keeps the listed material specification clear.

A 16-inch diameter and 7-inch width provide the wheel’s stated size, while the 4×100 pattern identifies the mounting layout to compare with the vehicle. Together, these details narrow a fitment check before installation, although the listing gives no offset or hub-bore measurement. The aluminum construction and graphite color are specified, and the item is listed as one wheel. Buyers planning a complete replacement should account for the quantity needed rather than assuming the package is a set.

Skip it if you need a listed offset and hub bore; the Circuit Performance CP23 specifies both +35 offset and a 73.1mm bore.

The Incident fits buyers drawn to a graphite machined 16×7 wheel with a 4×100 pattern. Treat it as a starting point for a passenger-car fitment check: its listing does not state offset or hub bore, and includes one wheel.

Listed on Amazon as: Konig Incident Graphite Machined Wheel (16×7"/4x100mm)

#7

7. Enkei J10

• Size: 16 in
• Material: Alloy Steel
• Compatible with Vehicle Type: Passenger Car

Best for: Silver dual-pattern Enkei.

Why it ranks #7: It offers a 16×7 size, +42 offset, and dual 4×100/114.3 PCD, but provides less direct fitment detail than higher-ranked choices.

The Enkei J10’s dual 4×100/114.3 bolt pattern is its key differentiator, giving buyers two listed patterns to compare with passenger-car requirements. Its 16×7 size and +42 offset establish additional fitment dimensions, while the silver-painted finish with machined lip supplies a brighter, detailed appearance.

The 4×100/114.3 PCD gives the J10 two listed bolt-pattern options, and its 16×7 size with +42 offset adds dimensions buyers can use in a vehicle fitment check. The silver paint and machined lip offer a contrasting finish treatment without changing those measurements. Enkei lists the wheel as alloy steel and compatible with passenger cars. Since no hub-bore figure appears in the supplied details, buyers needing that measurement will have to obtain it elsewhere before finalizing fitment.

Skip it if you need an explicit hub-bore figure; the Circuit Performance CP23 lists a 73.1mm bore.

Consider this J10 if you want a silver Enkei with a machined lip and a 4×100 pattern option. Its +42 offset and 16×7 dimensions support a fitment check, but the listing leaves hub-bore information unspecified.

Listed on Amazon as: 16×7 Enkei J10 (Silver w/ Machined Lip) Wheels/Rims 4×100/114.3 (409-670-10SP)

#8

8. Primax 533

• Size: 16 inch
• Material: Alloy Steel
• Compatible with Vehicle Type: Passenger Car

Best for: Machined dual-pattern wheel.

Why it ranks #8: This 16×7 wheel lists a 4-100/4-4.5 pattern and +38 offset, plus a center cap, but hub details are not supplied.

The Primax 533 lists both 4-100 and 4-4.5 bolt patterns, giving buyers two mounting patterns to check against their passenger car. Its 16×7 size and +38 specification add useful fitment detail, while the machined finish and included CAP 957C provide clear appearance and package information.

The dual 4-100/4-4.5 pattern and +38 specification supply key points for a fitment comparison, while the 16×7 size states the wheel’s diameter and width. The machined finish gives it a bright, detailed appearance, and the included CAP 957C means a cap is listed with the wheel. At approximately 20.2 pounds, the stated weight helps buyers compare handling during installation. The listing does not provide a hub-bore measurement, so that remains a separate fitment consideration.

Skip it if you require a stated hub measurement; the ROTA SLIPSTREAM lists a 67.1mm hub.

The Primax 533 suits buyers seeking a machined 16×7 wheel with dual listed bolt patterns and a supplied cap. Verify the +38 specification and vehicle fitment, and account for the unspecified hub bore before installation.

Listed on Amazon as: Primax 533 16×7 4-100/4-4.5 +38 Machined

#9

9. Touren TR60

• Size: 16×7
• Material: Aluminum
• Compatible with Vehicle Type: Tourer

Best for: Machined-black Touren option.

Why it ranks #9: Its title identifies a 16-inch wheel with 4×100 and +42mm offset, but the specifications conflict by listing a 20-inch wheel size.

The Touren TR60 combines a 42mm offset with a 67.1mm hub bore and dual 4×100/4×4.5 patterns, giving buyers several explicit fitment figures to compare. Its machined-black finish provides a contrasting look, while the listing identifies a 16-inch wheel and one-item quantity.

The dual bolt patterns, 42mm offset, and 67.1mm hub bore provide multiple measurements for a vehicle fitment check. The 16-inch size and machined-black finish clarify the wheel’s stated scale and appearance, while the single-item listing means buyers should plan quantity for a complete replacement. Lugs are not included, and the listing says centering rings are usually required with aftermarket wheels.

Skip it if you want a wheel listing that includes center caps; the ROTA SLIPSTREAM specifies center caps as included components.

The TR60 fits buyers who want a machined-black 16-inch wheel with dual patterns and a listed hub bore. Plan for separate lug hardware and check whether centering rings are needed for the vehicle before installation.

Listed on Amazon as: Touren TR60 16 Machined Black Wheel/Rim 4×100 & 4×4.5 with a 42mm Offset and a 67.1 Hub Bore. Partnumber 3260-6701B

#10

10. XXR 530

• Size: 16
• Material: Aluminum
• Compatible with Vehicle Type: Passenger Car

Best for: Wide flat-black XXR wheel.

Why it ranks #10: It lists a 16-inch diameter and 4-100 pattern, but its 16×8 width and +20 offset make it less aligned with the common 16×7 options.

An 8-inch width sets the XXR 530 apart from the 7-inch-wide options, giving buyers a wider 16-inch wheel to assess for their vehicle. It pairs that width with a 4-100/4-4.5 bolt pattern, +20 offset, 73.1mm hub bore, and flat-black finish.

The 16×8 dimensions and +20 offset provide specific measurements for checking clearance and fitment, while the dual 4-100/4-4.5 pattern identifies the listed mounting options. Its 73.1mm hub bore adds another key comparison point, and the aluminum construction keeps the material specification clear. A CAP 654F-BLK/BK is listed as included. Because this wheel is wider than a 16×7 option, buyers should confirm that the 8-inch width and offset suit their vehicle before installation.

Skip it if you need a 16×7 width; the Circuit Performance CP23 is specified at 16×7 with a +35 offset.

Consider the XXR 530 if your fitment calls for a 16×8 wheel with a +20 offset and 73.1mm hub bore. Its wider profile is the key boundary: verify clearance and vehicle compatibility before selecting it.

Listed on Amazon as: XXR WHEELS 530 16 X 8 BOLT PATERN 4-100/4-4.5, Offset: 20 Flat Black 73.1mm Hub bore