Best 1 1 8 Livewell Hose for Marine Intake and Drain Lines

Best 1 1 8 Livewell Hose

A strong 1-1/8-inch livewell hose should be identified for livewell intake or drainage, match your plumbing route, and suit the installation conditions; boat owners replacing those lines should start with a purpose-listed livewell hose. The seven options here range from 9 to 50 feet and include dedicated livewell hose, bilge and livewell hose, and products described mainly for bilge discharge. That distinction matters: a matching diameter alone does not make every marine hose a livewell hose.

Sierra’s Shields Livewell Hose is the clearest fit, while Trident and Sierra Multiflex offer useful alternatives with different stated applications and construction. Compare the listed dimensions, weight, material, and use notes, then verify your existing fittings and whether the route is above or below the waterline before choosing.

Sierra Shields Livewell Hose is the best overall choice because its description explicitly lists livewell intake and drain use, along with bilge intake and discharge, drains, and sanitation. The 50-foot length suits longer replacement runs or jobs requiring extra hose, and the product is rated for full vacuum and resists mild chemicals and saltwater. If you need a shorter piece or a different construction, compare the other options carefully: several are primarily listed for bilge discharge rather than livewell plumbing.

Our Top Picks

Sierra Shields Livewell HoseBest Overall

Sierra Shields Livewell Hose

Explicitly listed for livewell intake and drain, it is rated for full vacuum and resists mild chemicals and saltwater in a 50-foot length.

View on Amazon
Trident Rubber Bilge HoseClear Livewell Option

Trident Rubber Bilge Hose

The description identifies bilge, drain, and livewell use; its 1-1/8-inch clear corrugated vinyl has a smooth interior and 50-foot length.

View on Amazon
Sierra Shields MultiflexMulti-Use Hose

Sierra Shields Multiflex

Its stated applications include livewell drains and it is abrasion resistant, flexible, and saltwater resistant; the listing warns against below-waterline thru-hull use.

View on Amazon

Compare the Hose Options by Intended Use

#ProductDimensionsDimensions L x WWeightBuy
1600"L x 1.13"W600"L x 1.13"W12.5 lbView on Amazon
2
Trident Rubber Bilge Hose2. Trident Rubber Bilge HoseClear Livewell Option
5"L x 21"W5"L x 21"W10.1 lbView on Amazon
3600"L x 1.13"W600"L x 1.13"W8 lbView on Amazon
41"L x 1"W1"L x 1"W—View on Amazon
5
Sierra Bilgeflex 50-Foot Hose5. Sierra Bilgeflex 50-Foot HoseLong bilge discharge installation
600"L x 1.13"W600"L x 1.13"W3.5 lbView on Amazon
6
Marpac RNF Bilgeflex Hose6. Marpac RNF Bilgeflex HoseTen-foot bilge hose replacement
120"L x 1.13"W120"L x 1.13"W1.1 lbView on Amazon
7
Sierra Bilgeflex 9-Foot Hose7. Sierra Bilgeflex 9-Foot HoseCompact bilge discharge runs
108"L x 1.13"W108"L x 1.13"W8 ozView on Amazon

Detailed Reviews: Best 1 1 8 Livewell Hose

Sierra Shields Livewell Hose

#1 · Best Overall

1. Sierra Shields Livewell Hose

  • Dimensions: 600"L x 1.13"W
  • Dimensions L x W: 600"L x 1.13"W
  • Weight: 12.5 lb

Best for: Long livewell and drain runs.

Why it ranks #1: Explicitly listed for livewell intake and drain, it is rated for full vacuum and resists mild chemicals and saltwater in a 50-foot length.

A 50-foot length paired with a smooth black cover and vinyl helix makes this Sierra Shields hose suited to longer livewell, drain, and bilge routes. Its stated full-vacuum rating supports intake as well as discharge duties, offering more application flexibility than a hose listed only for discharge.

Sierra lists this 1-1/8-inch hose for livewell intake and drain, bilge-pump intake and discharge, and drains including sinks, showers, and scuppers. The full-vacuum rating supports suction-side routing, while resistance to mild chemicals and salt water fits marine service. A smooth outer cover with vinyl helix distinguishes its construction, and the 50-foot length can cover a more extensive installation. It is a substantial roll for a long project, rather than a short, single-connection repair.

Pros
  • 50-foot length supports extended installations
  • Rated for full vacuum
  • Listed for livewell intake and drain
  • Resistant to mild chemicals and salt water
Cons
  • A 50-foot roll is more hose than a short repair requires.

Skip it if you need only a short bilge discharge section; Sierra Bilgeflex 116-120-1182B is supplied as a nine-foot hose.

Choose this Sierra for a longer 1-1/8-inch livewell or drain installation that may include suction duty. Its broad listed uses and full-vacuum rating are useful boundaries to check against the actual route and application.

Full product details
BrandSierra
ColorBlack
Included ComponentsShields Livewell Hose 1-1/8" x 50 FT
Item Dimensions L x W600"L x 1.13"W
Item Weight12.5 pounds
ManufacturerSierra
MaterialVinyl
Dimensions600"L x 1.13"W
Additional InformationImportant Information Proposition 65 Warning for California Consumers WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov

Listed on Amazon as: Sierra International Shields Livewell Hose 1-1/8" x 50' 16-149-1186 Shields Livewell Hose 1-1/8" x 50',Black,116-149-1186

View on Amazon
Trident Rubber Bilge Hose

#2 · Clear Livewell Option

2. Trident Rubber Bilge Hose

  • Dimensions: 5"L x 21"W
  • Dimensions L x W: 5"L x 21"W
  • Weight: 10.1 lb

Best for: Flexible clear livewell routing.

Why it ranks #2: The description identifies bilge, drain, and livewell use; its 1-1/8-inch clear corrugated vinyl has a smooth interior and 50-foot length.

A smooth interior and stated exceptional flexibility give the Trident hose practical appeal for bilge, drain, and livewell routing where a hose must bend through the installation. Its 50-foot length offers material for an extended run, while the clear corrugated vinyl and black PVC helix define its construction.

Trident lists this 1-1/8-inch hose for bilge, drain, and livewell use, with a smooth interior that provides a continuous inside surface through the route. The clear corrugated vinyl and black PVC helix combine a flexible hose structure with a stated exceptional bend radius. At 50 feet, it can serve longer runs, but the product description explicitly says it is not recommended below the waterline. That limitation matters when planning where the hose will operate.

Pros
  • Listed for bilge, drain, and livewell use
  • Smooth interior
  • Described as exceptionally flexible with bend radius
  • 50-foot length supports extended runs
Cons
  • Not recommended for use below the waterline.

Skip it if you need a hose specifically rated for full vacuum; Sierra Shields Livewell Hose states that rating and lists livewell intake use.

Choose Trident for above-waterline bilge, drain, or livewell routing that benefits from flexibility and a smooth interior. Its explicit below-waterline restriction is an important boundary when planning the hose’s installation and operating position.

Full product details
BrandTrident flex m
ColorSilver
Included ComponentsTrident Marine 144-1186 1.125 in. x 50 ft. Box Bilge & Live Well Hose – Clear with Black Helix
Item Dimensions L x W5"L x 21"W
Item Weight10.1 pounds
ManufacturerTRIDENT RUBBER
MaterialRubber
Dimensions5"L x 21"W

Listed on Amazon as: Trident Rubber Bilge Hose H.D. 1 1/8 x 50

View on Amazon
Sierra Shields Multiflex

#3 · Multi-Use Hose

3. Sierra Shields Multiflex

  • Dimensions: 600"L x 1.13"W
  • Dimensions L x W: 600"L x 1.13"W
  • Weight: 8 lb

Best for: Versatile 50-foot marine runs.

Why it ranks #3: Its stated applications include livewell drains and it is abrasion resistant, flexible, and saltwater resistant; the listing warns against below-waterline thru-hull use.

A 50-foot length and broad listed duties make Sierra Shields Multiflex a versatile option for bilge discharge, potable-water tank fill, and livewell drains. Its clear FDA-formula PVC with black vinyl helix is described as flexible and abrasion resistant, helping the hose serve varied marine routes.

The 1-1/8-inch inner diameter and 50-foot length support planning a longer route across the listed bilge, tank-fill, and drain applications. Flexible, abrasion-resistant construction can help when routing hose through boat spaces, while resistance to mild chemicals and salt water suits marine service. Sierra specifies 147 right-hand-thread cuffs, a connection detail to account for in the installation. The supplied note says not to attach it to a below-waterline thru-hull fitting, an important limit for route selection.

Pros
  • 50-foot length supports extended routes
  • Listed for bilge discharge, tank fill, and livewell drains
  • Abrasion resistant and flexible
  • Resistant to mild chemicals and salt water
Cons
  • Must not attach to a thru-hull fitting below the waterline.

Skip it if you need a hose for below-waterline thru-hull attachment; Sierra Shields Livewell Hose is listed for intake and drain, not this Multiflex restriction.

This Sierra suits buyers seeking one 50-foot hose for several listed marine duties, including livewell drains and tank fill. Its right-hand-thread cuff detail and below-waterline thru-hull restriction should guide connection and route planning.

Full product details
BrandSierra
ColorBlack
Included ComponentsShields Multiflex 1-1/8" x 50 FT
Item Dimensions L x W600"L x 1.13"W
Item Weight8 pounds
ManufacturerTeleflex
Manufacturer Warranty DescriptionPlease contact us if you experience any issues within 30 days of receipt.
MaterialPolyvinyl Chloride (PVC), Vinyl
Dimensions600"L x 1.13"W

Listed on Amazon as: Sierra International Shields Multiflex 1-1/8" x 50' 16-141-1186B Shields Multiflex 1-1/8" x 50',

View on Amazon
PATIKIL Wire Reinforced Hose

#4 · Wire-Reinforced Pick

4. PATIKIL Wire Reinforced Hose

  • Dimensions: 1"L x 1"W
  • Dimensions L x W: 1"L x 1"W

Best for: Reinforced suction routing.

Why it ranks #4: The 10-foot, 1-1/8-inch-ID hose has spiral steel wire reinforcement intended to resist kinking, though its description does not specifically name livewell service.

Spiral steel-wire reinforcement is the PATIKIL hose’s defining feature, helping it resist kinking when bent so fluid can keep moving through a routed suction line. The 10-foot PVC-vinyl tube has a 1.1-inch inner diameter and is listed for water, fuel, powder, and drain applications.

The spiral steel wire structure is stated to resist kinking during bends, supporting fluid circulation where a suction hose needs to turn around equipment or through a confined route. Its 1.1-inch inner diameter and 1.3-inch outer diameter give useful sizing figures for planning connections and clearance. The listed temperature range is 5°F to 158°F, and the PVC-vinyl material is described as resistant to oil and wear. At 10 feet, it suits a defined run rather than extensive hose replacement.

Pros
  • Spiral steel-wire reinforcement resists kinking when bent
  • 10-foot length serves a defined hose run
  • 1.1-inch inner diameter is specified
  • Listed temperature range spans 5°F to 158°F
Cons
  • The 10-foot length limits use on longer routes.

Skip it if you need a 50-foot marine livewell hose; Sierra Shields Livewell Hose provides that length and is specifically listed for livewell intake and drain.

This PATIKIL hose suits buyers routing a 10-foot suction or drain line who value wire reinforcement and the stated temperature range. Check the specified 1.1-inch inner diameter against the connection and intended fluid use.

Full product details
BrandPATIKIL
ColorClear
Included Componentsfalse
Item Dimensions L x W1"L x 1"W
ManufacturerPATIKIL
Dimensions1"L x 1"W

Listed on Amazon as: PATIKIL 1-1/8" ID Wire Reinforced Hose 10 Ft PVC Vinyl Suction Tubing

View on Amazon
Sierra Bilgeflex 50-Foot Hose

#5

5. Sierra Bilgeflex 50-Foot Hose

  • Dimensions: 600"L x 1.13"W
  • Dimensions L x W: 600"L x 1.13"W
  • Weight: 3.5 lb

Best for: Long bilge discharge installation.

Why it ranks #5: This 50-foot, 1-1/8-inch polyethylene hose resists mild chemicals and saltwater, but the listed primary use is bilge pump discharge rather than livewell plumbing.

The 50-foot length is the Sierra Bilgeflex’s clearest advantage for a long bilge-pump discharge route, especially where clamping points along the hose help secure the installation. Its single-layer corrugated polyethylene construction has a one-inch bend radius and resistance to mild chemicals and salt water.

Sierra identifies this 1-1/8-inch Bilgeflex hose primarily for bilge-pump discharge, making its application clear for a long marine run. The corrugated polyethylene construction and one-inch bend radius support routing around tight spaces, while clamping cuffs every foot offer repeated locations to secure it. Resistance to mild chemicals and salt water suits the stated marine context. With 50 feet supplied, it is better matched to an extended replacement or installation than a small repair.

Pros
  • 50-foot length suits long routes
  • One-inch bend radius supports tight routing
  • Clamping cuff every foot aids securing
  • Resistant to mild chemicals and salt water
Cons
  • Its stated primary use is bilge-pump discharge, not livewell intake.

Skip it if you need a hose explicitly listed for livewell intake; Sierra Shields Livewell Hose is specified for livewell intake and drain.

Choose this Sierra for a long 1-1/8-inch bilge-pump discharge installation needing a flexible corrugated hose and regular clamping points. For livewell intake, its stated discharge focus is a relevant application boundary.

Full product details
BrandSierra
ColorBlack
Included ComponentsSierra 116-120-1186B Shields Bilgeflex Hose – 1-1/8" X 50'
Item Dimensions L x W600"L x 1.13"W
Item Weight3.5 pounds
ManufacturerSierra
Manufacturer Warranty Description90 days
MaterialPolyethylene (PE)
Dimensions600"L x 1.13"W
Additional InformationImportant Information Proposition 65 Warning for California Consumers WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov

Listed on Amazon as: Sierra 116-120-1186B 1-1/8" x 50' Bilgeflex Black Marine Hose

View on Amazon
Marpac RNF Bilgeflex Hose

#6

6. Marpac RNF Bilgeflex Hose

  • Dimensions: 120"L x 1.13"W
  • Dimensions L x W: 120"L x 1.13"W
  • Weight: 1.1 lb

Best for: Ten-foot bilge hose replacement.

Why it ranks #6: The 10-foot, 1-1/8-inch hose is described as a flexible solution for bilge pump needs, with no specific livewell application stated.

The Marpac RNF Bilgeflex comes as a 10-foot, 1-1/8-inch marine hose, making it a straightforward candidate for a defined bilge-pump replacement run. Its black PVC construction is identified as flexible and durable for bilge-pump needs, while the stated length avoids handling a 50-foot roll for a short job.

The listed 1-1/8-inch size identifies the hose dimension to match when replacing a bilge line, and the 10-foot length suits a bounded route without requiring a full 50-foot roll. Marpac describes the PVC hose as flexible, a practical quality when routing around boat equipment. Its specific stated application is marine bilge-pump use, so it is a focused choice rather than a broadly documented livewell or potable-water hose. Plan the route against the available length before installation.

Pros
  • 10-foot length suits a defined replacement route
  • 1-1/8-inch size is specified
  • PVC construction is described as flexible
  • Identified for marine bilge-pump needs
Cons
  • The supplied details do not specify a bend radius.

Skip it if you need a documented livewell intake and full-vacuum rating; Sierra Shields Livewell Hose is specifically listed for both.

This Marpac is a practical match for a short marine bilge-pump hose replacement where a 10-foot length fits the route. Buyers needing livewell-specific or suction-rating details should choose a hose whose supplied specifications state those duties.

Full product details
BrandMarpac
ColorBlack
Item Dimensions L x W120"L x 1.13"W
Item Weight1.1 pounds
ManufacturerBoating Accessories
MaterialPolyvinyl Chloride (PVC)
Dimensions120"L x 1.13"W

Listed on Amazon as: Marpac New Marine Boat RNF Bilgeflex Hose 1-1/8 x 10 7-2775

View on Amazon
Sierra Bilgeflex 9-Foot Hose

#7

7. Sierra Bilgeflex 9-Foot Hose

  • Dimensions: 108"L x 1.13"W
  • Dimensions L x W: 108"L x 1.13"W
  • Weight: 8 oz

Best for: Compact bilge discharge runs.

Why it ranks #7: Its 9-foot length and 1-1/8-inch size may suit a short bilge discharge run, but its stated primary use is not livewell service.

A nine-foot length with a one-inch bend radius makes the Sierra Bilgeflex a compact option for a short bilge-pump discharge run. Its 1-1/8-inch size and corrugated polyethylene construction suit that stated role, while the clamping cuffs spaced every foot give installers regular points to secure the hose.

This hose is primarily intended for bilge-pump discharge, and its 1-1/8-inch width identifies the intended hose size for that run. The single-layer corrugated polyethylene construction pairs flexibility with a one-inch bend radius, which can help route it through a tight installation. Resistance to mild chemicals and salt water suits a marine bilge environment, and cuffs every foot provide repeated clamping locations. At nine feet long, it is more suited to a short connection than a long multi-area replacement.

Pros
  • Nine-foot length suits a short hose run
  • One-inch bend radius supports tight routing
  • Clamping cuff every foot provides regular securing points
  • Resistant to mild chemicals and salt water
Cons
  • Nine feet may not reach a longer bilge-pump route.

Skip it if you need a long replacement run; Sierra 116-120-1186B Bilgeflex provides 50 feet of hose.

Choose this Sierra for a short 1-1/8-inch bilge-pump discharge connection where a tight bend and frequent clamping points matter. Its nine-foot length is the key boundary, so measure the route before selecting it.

Full product details
BrandSierra
Color['Black']
Item Dimensions L x W108"L x 1.13"W
Item Weight8 ounces
ManufacturerSierra International
MaterialPolyethylene (PE)
Dimensions108"L x 1.13"W

Listed on Amazon as: Sierra International 116-120-1182B 1-1/8" X 9' Bilgeflex Black Marine Hose

View on Amazon

Avoid the below-waterline hose trap

Do not assume that a hose described for livewell or bilge service is automatically suitable for every below-waterline connection. The Trident description specifically says it is not recommended for use below the waterline, while Sierra Shields Multiflex says not to attach it to a thru-hull fitting below the waterline. Those cautions are important because livewell plumbing can include different routes and connections, and the product name alone does not establish safe placement.

Sierra Shields Livewell Hose is rated for full vacuum, but the supplied description does not give a blanket approval for every below-waterline installation either. Check the boat’s plumbing layout and the hose maker’s installation guidance for the precise connection.

If the hose connects to a thru-hull or another opening below the waterline, do not substitute a general-purpose hose based only on its diameter or flexibility; confirm that the product is approved for that specific application.

Measure the route, not just the old hose

Measure the full installed path and allow for the routing needed to reach the fittings before choosing a cut length. These listings include 9- and 10-foot hoses as well as 50-foot rolls, so a short option may be convenient for one repair but unsuitable for a longer run or several replacements. The 50-foot Sierra Shields Livewell Hose is explicitly intended for livewell intake and drain use; the 50-foot Trident hose also names livewell use, but carries a below-waterline caution.

Sierra Shields Multiflex is another 50-foot option and lists livewell drains among its applications. Do not treat the listed 1-1/8-inch size as proof that an existing connector will fit: check the boat’s hose and fitting dimensions, as well as the route and bends.

A too-short run can make routing difficult, while excess hose can require additional cutting and securing.

How to Choose 1-1/8-Inch Livewell Hose

Intended plumbing use

Look first for an explicit livewell application, rather than relying on the shared 1-1/8-inch size. Sierra Shields Livewell Hose lists livewell intake and drain, as well as bilge, drain, and sanitation uses. Trident Rubber Bilge Hose is described for bilge, drain, and livewell use, while Sierra Shields Multiflex lists livewell drains among its uses.

By contrast, Sierra Bilgeflex hoses are primarily described for bilge pump discharge, and Marpac RNF Bilgeflex is presented for bilge pump needs. Buyers replacing a livewell line should favour the first group; a bilge-discharge-only listing is a weaker match unless the manufacturer confirms it is appropriate for the planned livewell application.

Length for the installation

Choose a hose length that covers the measured route and any extra runs you intend to replace. The choices span 9 feet for Sierra Bilgeflex 9-Foot Hose, 10 feet for PATIKIL Wire Reinforced Hose and Marpac RNF Bilgeflex Hose, and 50 feet for several Sierra and Trident options. A 9- or 10-foot hose can suit a single short repair if the measured route fits.

A 50-foot option offers more length for a longer run or multiple planned sections, but the listing does not establish how much usable hose a particular boat needs. Measure before ordering, and account for routing and connection points rather than estimating from the old hose alone.

Construction and handling

Compare the listed construction and handling details against the route and service conditions. Sierra Shields Livewell Hose has a smooth cover with vinyl helix and is rated for full vacuum; Sierra Shields Multiflex uses clear PVC with a black vinyl helix and is described as abrasion resistant and flexible. Trident is clear corrugated vinyl with a black PVC helix and smooth interior, but is not recommended below the waterline.

PATIKIL uses spiral steel wire reinforcement and is described as resisting kinks when bent. Sierra Bilgeflex is single-layer corrugated polyethylene, with a stated one-inch bend radius.

Buyers needing a specifically listed livewell hose should prioritize the intended-use match; for a general suction route, compare the construction details while checking each product’s limitations.

Which 1-1/8-inch livewell hose should you choose?

Choose Sierra Shields Livewell Hose for the clearest match to livewell intake or drain service: it is explicitly listed for both and rated for full vacuum. For a clear corrugated hose described for livewell use, consider Trident Rubber Bilge Hose, but observe its warning against below-waterline use. Sierra Shields Multiflex is a versatile alternative when livewell drains, potable-water tank fill, or other listed drains are relevant; do not use it on a below-waterline thru-hull fitting.

If your job is actually a bilge discharge replacement, Sierra Bilgeflex 50-Foot Hose or Marpac RNF Bilgeflex Hose may fit that stated purpose better than a livewell-specific pick. For a short run, compare the 9- and 10-foot options with your measured route, and confirm fittings and installation approval before ordering.

Frequently Asked Questions

How do I measure the hose run and account for bends before ordering?

Measure the route between the connection points, following the path the hose will take rather than measuring straight across. Include the length needed to pass around bends and reach fittings without pulling the hose tight. Compare that total with the listed hose length, and confirm the route and bend requirements during installation.

Which clamps and fittings should I use to connect a replacement livewell hose?

Use fittings that match the hose’s 1-1/8-inch inside diameter and the connection type on your boat. Select clamps suitable for the hose and marine installation, and follow the fitting and clamp makers’ guidance for placement and tightening. Check that connections are secure and compatible before putting the system into service.

Can a 1-1/8-inch hose safely run below the waterline on my boat?

Do not assume that every 1-1/8-inch hose is suitable below the waterline; confirm the product’s stated use and installation requirements. The Trident hose description warns against below-waterline use, and the Multiflex guidance says not to use it on a below-waterline thru-hull fitting. Verify approval for your specific installation before ordering.

How much hose length should I choose for my replacement run?

Choose a length that covers your measured route, including bends and connection allowance, without leaving an unnecessarily difficult coil to manage. The listed options include 9- and 10-foot hoses and 50-foot hoses. Measure first, then compare the available length with your route and the intended plumbing use.

How can I tell whether a hose is intended for livewell or bilge service?

Check the product description for the specific applications it names rather than relying on diameter or a general marine-hose label. Sierra Shields Livewell Hose explicitly lists livewell intake and drain use. Several other options are primarily listed for bilge discharge, so verify that the stated purpose matches your plumbing job.

Final Words

For a livewell intake or drain replacement, Sierra Shields Livewell Hose is the clearest match: its description names both uses, and it is rated for full vacuum. Measure the route before choosing its 50-foot length or a shorter option. Consider Trident for a corrugated hose described for livewell use, but heed its below-waterline warning.

For bilge discharge, compare the Bilgeflex options, and confirm fittings and installation approval before ordering.