Best 22 Ton Air Jack for Trucks, Trailers, and Shop Work

#1 · Best Overall

1. Sunex Tools 6622

• Weight: 113 lb
• Load Capacity: 22 tons
• Material: Metal
• Compatible with Vehicle Type: Trailer, Truck

Best for: Tight-access truck service.

Why it ranks #1: Its 22-ton rating, narrow chassis, 9-to-13.5-inch lift range, and overload and bypass valves suit demanding truck and trailer service.

A narrow chassis helps the Sunex 6622 reach heavy-duty service points with tighter access, an advantage when a wider jack cannot be positioned as readily. Its 22-ton air/hydraulic capacity and 9-inch low height target truck and trailer work.

The 9-inch low height and 13.5-inch maximum height, including 4.5 inches of power raise, define the clearance and lift range available for service positioning. Wiper seals help protect the hydraulic system from contaminants, while overload and bypass safety valves manage pressure under load. A self-retracting ram supports repeat-duty workflow, and integrated air-motor protection adds another stated safeguard. At 113 pounds, this is a substantial floor jack to place and move around a service area.

Skip it if you need a light jack to move frequently; this Sunex weighs 113 pounds, while the MOTOOS Floor Jack lists 64.6 pounds.

A strong match for truck and trailer service where a narrow chassis, stated hydraulic protections, and repeat-duty features suit the work. Account for its 113-pound weight and 13.5-inch maximum height when planning access and positioning.

Listed on Amazon as: SUNEX TOOLS 6622 22-Ton, Air/Hydraulic, Truck Jack

#2 · Best Quick Lift

2. Strongway 22-Ton Floor Jack

• Weight: 101 lb
• Load Capacity: 22 Tons
• Material: High-grade Steel
• Compatible with Vehicle Type: Heavy vehicles, trucks, industrial machinery

Best for: Quick-contact shop floor jack.

Why it ranks #2: The 22-ton floor jack has a Quick Lift system for faster load contact and specifies a 100–120 PSI air supply.

Strongway’s Quick Lift system brings the lifting ram into contact with the load faster, helping reduce the approach time in heavy-vehicle service. This 22-ton air/hydraulic floor jack is listed for heavy vehicles, trucks, and industrial machinery.

The Quick Lift system shortens the time before the ram reaches the load, a useful workflow advantage when positioning the jack during service. A large-diameter hydraulic steel cylinder needs lower oil pressure to raise the load, which the supplied facts connect with reduced wear and longer service life. Its high-grade steel construction suits heavy-duty use, while the oil-, grease-, and dirt-resistant paint is intended to make cleanup easier in a working shop.

Skip it if you need a 22-ton jack that weighs less; the listing gives this Strongway a 101-pound weight.

A fit for heavy-vehicle shops and industrial service users who value faster ram contact and an easier-to-clean finish. Consider its listed 101-pound weight when planning repositioning, and use an air supply rated 100–120 PSI for air operation.

Listed on Amazon as: Strongway 22-Ton Quick Lift Air/Hydraulic Service Floor Jack

#3 · Best Vehicle Coverage

3. Stark USA 22-Ton Floor Jack

• Weight: 80.2 lb
• Load Capacity: 44000 lb
• Material: Steel
• Compatible with Vehicle Type: Bus, RV, Sport Utility Vehicle, Tractor…

Best for: Fleet and equipment floor jack.

Why it ranks #3: Its 22-ton floor-jack listing covers trucks, trailers, buses, RVs, and tractors, and includes a four-piece saddle extension set.

A four-piece extension saddle set pairs with this Stark USA jack’s stated 22-ton capacity, giving heavy-vehicle and equipment users added contact-height options. Its listed applications include trucks, trailers, buses, RVs, tractors, vans, and SUVs.

The included saddle-extension set adds options for lifting-point height, while the 22-ton capacity targets demanding vehicle and equipment service. Large hard-rubber tires on steel wheels measure 8 inches in diameter and are specified to absorb shock and resist wear and skidding, supporting movement around a work area. A treated, polished piston-ram and Y-style polyurethane sealing ring with backup ring are listed for long-wearing performance. The broad vehicle compatibility is useful, but the supplied details do not give a saddle-height range.

Skip it if you need a published saddle-height range to confirm clearance; the Stark listing does not provide one.

For fleet, agricultural, or industrial users lifting listed vehicles and equipment, the extensions and shock-absorbing rubber tires are useful specifics. The broad compatibility does not replace a stated height range, so clearance remains a key fit consideration.

Listed on Amazon as: Stark USA 22 Ton Air Hydraulic Floor Jack, Heavy Duty Pneumatic Axle Bottle Jack with 4-Piece Extension Saddle Set, Built-in Wheels for Truck, Trailer, RV & Heavy Equipment Lifting, Blue

#4 · Best Lift Range

4. VEVOR 22-Ton Floor Jack

• Weight: 87.2 lb
• Load Capacity: 48501 lb
• Material: Q235B
• Compatible with Vehicle Type: SUVs, pickups, off-road vehicles, and more

Best for: Extended-height vehicle lifting.

Why it ranks #4: It lists a 10.4-to-16.1-inch lift range, an adjustable extension to 21.3 inches, and three extension posts for varied clearance needs.

An adjustable screw extension raises this VEVOR jack’s maximum height to 21.3 inches, extending its stated 10.4-to-16.1-inch lift range. Three extension posts and a 22-ton air lift make it a distinct option for SUVs, pickups, RVs, and off-road vehicles.

The 10.4-to-16.1-inch lift range covers the jack’s standard stated span, while the adjustable screw extension increases maximum height to 21.3 inches for higher lifting points. Three extension posts provide additional height options, with three R-type pins included to secure them. Its Q235B construction and high-strength structure are described as helping reduce wobble and sinking during lifting. At 87.2 pounds, it is a substantial unit to move, and air-powered operation requires suitable air access.

Skip it if you prioritize a lighter jack for frequent repositioning; this VEVOR weighs 87.2 pounds, while the MOTOOS Floor Jack lists 64.6 pounds.

A fit for SUV, pickup, RV, and off-road vehicle users who need extension posts and extra maximum height. Consider its 87.2-pound weight and 10.4-inch minimum height when evaluating movement and clearance.

Listed on Amazon as: VEVOR 22 Ton Air Hydraulic Floor Jack Trucks Heavy Duty Steel Racing Floor Jack with Single Piston Quick Lift Pump & Extension Posts & Extension Posts, Air Pneumatic Jacks for SUVs, Pickups

#5 · Best Adapter Set

5. Parts-Diyer 22-Ton Floor Jack

• Weight: 81.8 lb
• Load Capacity: 22 tons
• Material: Q235 steel
• Compatible with Vehicle Type: Universal

Best for: Four-adapter frame coverage.

Why it ranks #5: The 22-ton floor jack includes four steel extension adapters in 10, 25, 60, and 100 mm sizes for varied saddle heights.

Four included steel extension adapters give this Parts-Diyer jack multiple contact-height options for differing lift points. The 22-ton air/hydraulic floor jack also has a 46-inch handle, pairing its adapter set with a long control handle for service work.

The included 10, 25, 60, and 100 mm adapters are made from 45# heavy-duty steel, offering several extension choices for different lifting points. A 46-inch handle supports operation, while the treated and polished piston-ram is specified to resist thinning over time. Its Y-style polyurethane sealing ring and backup ring are additional details aimed at long-wearing performance. The listing states universal vehicle compatibility, but gives no saddle-height range in the supplied specifications, so positioning requirements need particular attention.

Skip it if you need a specified minimum saddle height before selecting a jack; this listing supplies no saddle-height range.

This suits buyers who value multiple adapter heights, a long handle, and the stated universal vehicle compatibility. Because no saddle-height range is supplied, make sure its positioning details meet your vehicle’s clearance needs before relying on it.

Listed on Amazon as: Air Hydraulic Floor Jack Blue, 22 Ton Capacity

#6

6. MOTOOS 22-Ton Floor Jack

• Weight: 64.6 lb
• Load Capacity: 22 tons
• Material: Q235 steel
• Compatible with Vehicle Type: Truck

Best for: Rubber-wheel axle service.

Why it ranks #6: It offers a 9-inch minimum saddle height, 17-11/16-inch maximum height, 4.5-inch stroke, and 47-inch handle for truck lifting.

Two large hard-rubber tires on steel wheels give the MOTOOS jack a specified mobility and stability feature for axle work. Its 22-ton rating, 9-inch minimum saddle height, and 17-11/16-inch maximum height establish its stated heavy-vehicle lifting range.

The 9-inch minimum saddle height provides a low starting point, while the maximum height of 17-11/16 inches and 4-1/2-inch stroke describe its lifting range for varied service positions. A 47-inch handle has a lock lever, and its angle is adjustable, helping the operator position the jack for the task. The two large hard-rubber tires on steel wheels are specified for mobility and stability. The supplied vehicle compatibility is truck, so buyers should weigh that listed fit.

Skip it if you need a jack with explicitly broader listed vehicle compatibility; the MOTOOS specifications name trucks only.

For truck-service buyers seeking an axle floor jack with a long adjustable handle and rubber-tired steel wheels, this covers useful positioning details. Its stated 9-to-17-11/16-inch range and truck-only compatibility are important fit boundaries.

Listed on Amazon as: 22 Ton Air Hydraulic Floor Jack Quick Lift Air-Operated Axle Bottle Jack

#7

7. GarveeTech 22-Ton Floor Jack

• Weight: 78.9 lb
• Load Capacity: 22 tons
• Compatible with Vehicle Type: Car

Best for: Low-clearance adapter versatility.

Why it ranks #7: Its listed 9-inch minimum height, four adapters, 46-inch adjustable handle, and 22-ton capacity fit varied heavy-vehicle setups.

A 9-inch minimum saddle height lets this GarveeTech jack reach lower-clearance vehicles, while four saddle adapters accommodate varied frame shapes. Its 22-ton capacity and listed truck-and-tractor focus suit buyers handling heavy vehicles with different lifting points.

The four included adapters—10, 25, 60, and 100 mm—give buyers options for securing differing frame shapes, while the 9-inch minimum height helps the saddle reach beneath lower vehicles. The 46-inch adjustable handle pivots from 90 to 180 degrees for positioning in tight spaces. Eight-inch rubber tires are specified to absorb shock and resist skidding. Air operation requires 90–145 PSI and a 3 HP compressor, so the setup depends on suitable shop air.

Skip it if you lack a 3 HP compressor capable of 90–145 PSI; the specified air operation depends on that supply.

Consider it for truck or tractor work where low clearance, varied frame shapes, and handle positioning matter. Its 9-to-17.7-inch lifting range and compressor requirement are key fit considerations for your vehicle and shop.

Listed on Amazon as: GarveeTech 22 Ton Air Hydraulic Floor Jack for Heavy Duty Trucks & Tractors – Low Profile (9"-17.7"), 4 Adapters, 46" Adjustable Handle – 44,000 Lbs Capacity

#8

8. EliteEdge 22-Ton Floor Jack

• Weight: 78.9 lb
• Load Capacity: 22 Ton
• Material: Alloy Steel
• Compatible with Vehicle Type: Car

Best for: Dual-power fleet lifting.

Why it ranks #8: This 22-ton air/hydraulic floor jack lists a 9-inch low profile, four adapters, and a 46-inch adjustable handle.

Air and manual hydraulic power give the EliteEdge jack two stated ways to operate, making it relevant where buyers want both modes in a 22-ton floor jack. Its 9-inch low profile and four adapters address clearance and uneven-frame lifting needs.

The 9-inch minimum height helps the jack reach under lower vehicles, and the four 10, 25, 60, and 100 mm adapters provide options for uneven frames and specialty vehicles. Its 46-inch handle pivots from 90 to 180 degrees to help with positioning in tight spaces. The listing specifies reinforced alloy-steel construction and 22-ton capacity for heavy-duty trucks, tractors, and trailers. Air/manual hydraulic operation is stated, but no operating-pressure range appears in the supplied information.

Skip it if you need a stated air-pressure range before choosing an air jack; the EliteEdge listing does not provide one.

A candidate for fleet or workshop users who want dual power, a low starting height, and adapters for varied frames. Check the missing pressure specification against your compressor setup, as well as the 9-to-17.7-inch listed height range.

Listed on Amazon as: 22 Ton Air Hydraulic Floor Jack, 44,000 LBS Capacity for Heavy Duty Trucks & Tractors, Low Profile 9 inch, with 4 Adapters, Dual Power (Air/Manual Hydraulic), 46" Adjustable Handle

#9

9. Curtainboro 22-Ton Floor Jack

• Weight: 78.9 lb
• Load Capacity: 22 Ton
• Compatible with Vehicle Type: Car

Best for: Low-profile dual-power lifting.

Why it ranks #9: It lists a 9-inch minimum height, four adapters, a 46-inch handle, and a stated 90–145 PSI air-pressure range.

Dual air and hydraulic operation gives the Curtainboro jack two stated power modes, while its 9-inch minimum height addresses low-clearance access. Four adapters and a 22-ton rating add lifting-point options for heavy-duty truck, tractor, and trailer work.

The 9-inch minimum saddle height helps position the jack beneath lower vehicles, and the four 10, 25, 60, and 100 mm adapters provide options for differing frame shapes. A 46-inch handle pivots from 90 to 180 degrees to assist positioning in tight spaces. The listed 4-1/2-inch stroke and 17-11/16-inch maximum saddle height describe its specified lift range. Air operation calls for 90–145 PSI and a 3 HP compressor, an important shop-equipment requirement.

Skip it if you lack a 3 HP compressor capable of 90–145 PSI; its specified air operation requires that supply.

This suits truck, tractor, and trailer users seeking low clearance, dual power, and adapter choices. Its 9-to-17-11/16-inch saddle range and compressor requirement set practical boundaries for vehicle access and shop setup.

Listed on Amazon as: 22 Ton Air Hydraulic Floor Jack for Heavy Duty Trucks & Tractors – 44,000 LBS Capacity, Low Profile (9"-17.7"), 4 Adapters (10/25/60/100mm), 46" Adjustable Handle – Dual Power (Air/Hydraulic)

#10

10. Stark USA Pneumatic Bottle Jack

• Weight: 31 lb
• Load Capacity: 20 Tons
• Material: Steel, Metal
• Compatible with Vehicle Type: ATV, Bus, Sport Utility Vehicle, Tractor…

Best for: Dual-mode bottle jack.

Why it ranks #10: Its bottle-jack format offers pneumatic and manual operation, but the title says 22 tons while the specifications list only 20 tons.

Pneumatic and manual lifting give this Stark USA bottle jack two operating modes, so it can serve where air assistance and hand operation are both useful. Its listing names automobiles, agricultural vehicles, heavy trucks, and mobile machinery among the intended maintenance applications.

The adjustable rod lets the lifting height be set flexibly, while the listed pneumatic-and-manual operation offers an alternative to relying on air alone. Its steel and metal construction and 31-pound listed weight describe a substantial bottle-jack format for vehicle or machinery maintenance. The supplied compatibility list includes ATVs, buses, SUVs, tractors, trucks, and UTVs, giving buyers several vehicle categories to consider. Check capacity carefully: the title says 22 tons, while specifications list 20 tons.

Skip it if you need an unambiguous 22-ton capacity; the specifications list 20 tons, while the title states 22.

For buyers seeking a bottle jack with air and manual operation for vehicle or agricultural-equipment maintenance, this offers broad listed compatibility. Its capacity discrepancy matters: verify the 20-ton specification against your lifting requirement before choosing it.

Listed on Amazon as: Stark USA 22 Tons Pneumatic Air Bottle Hydraulic Manual Bottle Jack Hoist Maintenance of Automobiles, Agricultural Vehicles, Trucks, Mobile Machinery