Best 1 Hp Convertible Jet Pump for Shallow and Deep Wells

#1 · Best Overall

1. Superior Pump 94115

• Material: Cast Iron
• Material Type: Cast Iron

Best for: Adjustable shallow-well setup.

Why it ranks #1: Includes an ejector kit, a cast-iron pump body, and a 115/230V 1 HP motor; its adjustable pressure switch supports shallow-well use up to 25 feet.

A pre-mounted, fully adjustable pressure switch is the Superior Pump 94115’s most practical distinction for shallow-well buyers: it supports pressure control without a separate switch mounting step. Its 1 HP dual-voltage motor and included eject kit also make it a flexible option for well installations.

The cast-iron pump body pairs with a thermoplastic impeller and glass-filled thermoplastic diffuser, while the cast-iron seal plate completes the listed construction. For shallow-well use, the adjustable pressure switch is already mounted and the listing specifies applications up to 25 feet. The 115/230V motor gives electrical configuration flexibility, and the included eject kit supports convertible use. Its 11⁄4-inch NPT suction and 1-inch discharge/drive ports help inform pipe planning.

Skip it if you need a stated deep-well reach beyond 25 feet; the K2 WPD10007K is listed for two-pipe wells up to 110 feet.

Choose this Superior Pump for a shallow-well installation where its included eject kit, adjustable mounted switch, and dual-voltage motor fit the setup. Its listed shallow-well limit is 25 feet, so check the source depth before selecting it.

Listed on Amazon as: Superior Pump 94115 1 Hp Convertible Jet Pump With Eject Kit, 115/230 Volt

#2 · Complete Depth Kit

2. Acquaer CJE100-1

• Material: Cast Iron
• Voltage: 115 V
• Material Type: Cast Iron

Best for: Dual-voltage well conversion.

Why it ranks #2: Includes venturis and an ejector kit for single-pipe wells to 25 feet or two-pipe wells from 26 to 90 feet, with dual voltage.

Factory-set 230V operation with 115V/230V capability gives the Acquaer CJE100-1 a useful electrical choice for convertible well setups. Its included venturis and ejector kit cover single-pipe wells to 25 feet and two-pipe wells from 26 to 90 feet.

The 1 HP motor is specified for both 115V and 230V, with 230V as the factory setting, so installation planning should account for the intended supply and voltage setting. Its cast-iron construction supports well and irrigation use, while the included venturis and ejector kit enable conversion between the stated shallow- and deep-well ranges. An automatic pressure switch is listed, adding automatic pressure control to the pump’s operation. At 14 by 8.8 by 8 inches, its dimensions help assess mounting space.

Skip it if you want a pump factory-set to 115V; the Wayne CWS100 is listed with a 115V default setting.

The Acquaer fits owners who need shallow- or deep-well conversion components and can configure the motor for their electrical supply. Its factory setting is 230V, so account for that during setup, along with the stated 25- and 90-foot well ranges.

Listed on Amazon as: Shallow/Deep Well Jet Pump, Cast Iron Convertible Pump with Ejector Kit, Well Depth Up to 25ft or 90ft, 115V/230V Dual Voltage, Automatic Pressure Switch

#3 · Deep-Well Reach

3. K2 WPD10007K

• Material: Cast Iron, Stainless Steel
• Voltage: 115 V AC
• Material Type: Cast Iron, Stainless Steel

Best for: Deep-well reach with pressure control.

Why it ranks #3: Its universal ejector kit supports shallow or deep setups, with listed depth to 110 feet, dual voltage, and a pre-mounted 30–50 pressure switch.

A universal ejector kit configurable for shallow or deep wells gives the K2 WPD10007K broad installation options, including two-pipe wells with water depths up to 110 feet. Its pre-mounted 30–50 pressure switch supports automated operation without a separate switch-mounting step.

The 1 HP dual-voltage motor ships preset to 230V and has a built-in switch for conversion to 115V, which gives installers a defined way to match available power. A capacitor-start induction-run design supplies higher starting torque, while the mechanical seal and stainless-steel shaft specify key internal materials. The included pressure gauge and pre-mounted 30–50 switch support monitoring and automated pressure operation. The universal ejector kit supports shallow-well use to 25 feet or deep-well use to 110 feet.

Skip it if you need the pump factory-set to 115V; the Wayne CWS100 is listed with a 115V default setting.

The K2 fits an installer seeking a convertible pump with a gauge, pressure switch, and a stated deep-well reach to 110 feet. Plan for its 230V preset and use the built-in switch if the installation requires 115V.

Listed on Amazon as: PROFESSIONAL GRADE 1 HP Heavy-Duty Cast Iron Convertible Deep Well Jet Pump

#4 · Longest Listed Reach

4. Star JHU10

• Material: Cast Iron
• Material Type: Cast Iron

Best for: Wide-depth convertible installations.

Why it ranks #4: The convertible design is specified for shallow wells to 25 feet and deep wells to 110 feet, with a cast-iron body and dual-voltage motor.

The Star JHU10’s stated reach—from a 0–25-foot single-pipe shallow well to a dual-pipe deep well with up to 110 feet of lift—makes depth flexibility its defining feature. A 1 HP, 115/230V continuous-duty motor also accommodates residential and irrigation applications.

Its convertible jet design supports two installation approaches: single-pipe shallow wells and dual-pipe deep wells. The 1 HP motor runs on either 115V or 230V and is described as continuous duty, giving buyers electrical flexibility for sustained residential or irrigation work. Capacitor start supplies the motor’s starting design, while the heavy-duty cast-iron body supports demanding well-water conditions. The product dimensions are 19.2 by 10.2 by 15 inches, useful when planning a mounting location.

Skip it if you need a stated warranty; the Wayne CWS100 listing specifies a three-year manufacturer warranty.

The Star suits owners whose well configuration may call for either shallow single-pipe or deep dual-pipe operation, including residential and irrigation use. Its listed 110-foot deep-well lift is a key fit boundary; confirm the installation depth and available space.

Listed on Amazon as: Star JHU10 1 HP Cast Iron Convertible Jet Pump for Shallow or Deep Wells, Made in the USA using a Majority of U.S. Content

#5 · Highest Capacity

5. CrestWave BGB00070100

• Material: Cast Iron
• Voltage: 115 V
• Material Type: Cast Iron

Best for: Included-kit irrigation flexibility.

Why it ranks #5: Includes ejector components and lists output up to 2,330 GPH at 26 feet and 824 GPH at 90 feet, though its motor is 115V only.

Included venturi components and an ejector kit let the CrestWave handle shallow wells up to 26 feet or deep wells up to 90 feet without sourcing those conversion pieces separately. Its listed flow reaches 2,330 GPH at 26 feet, suiting garden irrigation and sprinkler demands.

The 1 HP, 115V motor is specified for up to 145 feet of vertical lift and 60 PSI maximum pressure, giving irrigation planners concrete performance limits to weigh against their system. The pump’s cast-iron construction provides a durable housing, while the included ejector and venturi components support both single-pipe shallow-well and deep-well configurations. Stated output falls to 824 GPH at 90 feet, so expected well depth is important when matching it to water demand.

Skip it if you need a dual-voltage motor; the Acquaer CJE100-1 supports 115V and 230V operation.

This CrestWave fits gardeners or sprinkler-system owners who value included conversion components and have a 115V supply. Match its listed flow to the source depth: output is specified at 2,330 GPH at 26 feet and 824 GPH at 90 feet.

Listed on Amazon as: CrestWave 1 HP Shallow/Deep Well Jet Pump, AC 115V, 2330 GPH, Cast Iron Convertible Deep Well Pump with Ejector Kit, Well Depth Up to 26ft or 90ft, for Garden Irrigation Lawn Sprinkler System

#6

6. Wayne CWS100

• Material: Cast Iron
• Voltage: 115 V
• Material Type: Cast Iron

Best for: Deep-well household water supply.

Why it ranks #6: This 1 HP cast-iron pump lists capacity up to 588 gallons per hour and wells to 90 feet, but its jet assembly is required and sold separately.

A stated well-depth range of 25–90 feet gives the Wayne CWS100 a clear role for deeper residential sources, while its 1 HP motor can pump up to 588 gallons per hour at 50 PSI. That combination suits homeowners moving fresh water from a well to the house.

The cast-iron volute provides a durable pump body, and its dedicated priming port gives installers a specific place to fill the volute during setup. Dual-voltage operation supports 115V or 230V supply, though it ships set to 115V, so the electrical setting matters when planning installation. The listed 25–90-foot well range helps identify its intended source depth. The jet assembly is required but sold separately, an important part of planning a deep-well installation.

Skip it if you need the jet assembly included; the CrestWave B0H19ZQB78 listing includes an ejector kit and venturi components.

The Wayne suits a homeowner supplying a house from a well in its stated 25–90-foot range, especially where the 50-PSI flow figure is relevant. Account for the separately sold jet assembly and verify the voltage setting for the installation.

Listed on Amazon as: WAYNE CWS100-1 HP Cast Iron Convertible Jet Well Pump – Up to 588 Gallons Per Hour – Heavy Duty Jet Well Pump

#7

7. Flotec 4014937

Best for: Private wells with EZ voltage switching.

Why it ranks #7: A 1 HP cast-iron convertible pump for private wells, with a listed 810 GPH flow and 20–40 pressure switch; an ejector kit is required.

An EZ-change dual-voltage switch and a pressure switch preset to 20–40 make the Flotec 4014937’s setup details unusually specific for private-well buyers. It is a 1 HP cast-iron convertible pump listed for private wells to 80 feet and low-flow irrigation use.

The preset 20–40 pressure switch supplies a defined operating range, while the dual-voltage motor’s EZ-change switch provides a stated way to change voltage. The pump housing must first be filled before the unit can self-prime, which is an important startup step. Its cast-iron casing is specified for well and low-flow irrigation applications. The listing says an ejector kit is required for shallow- or deep-well conversion, so include that component in installation planning.

Skip it if you want the ejector kit included; the Acquaer CJE100-1 listing includes venturis and an ejector kit.

The Flotec suits private-well owners or low-flow irrigation users who value a preset 20–40 switch and an EZ-change voltage switch. Plan to fill the housing before self-priming and source the required ejector kit for conversion.

Listed on Amazon as: Flotec 4014937 1 HP 810 GPH Cast Iron Convertible Jet Well Pump

#8

8. Goulds JRD10

• Material: Plastic, Stainless Steel
• Material Type: Plastic, Stainless Steel

Best for: Dual-voltage Goulds replacement.

Why it ranks #8: The listing confirms a 1 HP convertible jet pump with single-phase 115/230V power, but supplies little detail about depth or included ejector components.

The Goulds JRD10 combines a 1 HP rating with single-phase 115/230V operation, giving buyers a straightforward convertible-pump option when matching motor voltage is a priority. Its supplied listing identifies it as a jet pump, but provides few other performance or installation details.

The stated single-phase motor voltage options let an installer consider either 115V or 230V supply, while the convertible jet-pump designation identifies its broad well-pump category. The listing names plastic and stainless steel as materials, rather than specifying a cast-iron body. It does not provide well-depth limits, flow figures, or an included ejector kit, so those details cannot be used here to determine its suitability for a particular source or conversion setup.

Skip it if you need stated shallow- and deep-well ranges with an included ejector; the CrestWave B0H19ZQB78 lists both.

The Goulds JRD10 may suit a buyer whose main known requirements are a 1 HP convertible jet pump and single-phase 115/230V capability. The supplied details omit depth and flow limits, so those requirements remain a deciding boundary.

Listed on Amazon as: Goulds JRD10 Convertible Jet Pump, 1 HP, 1 PH

#9

9. Goulds HSJ10N

• Material: Cast Iron
• Voltage: 230 V
• Material Type: Cast Iron

Best for: Two-stage convertible pump buyers.

Why it ranks #9: This 1 HP, two-stage convertible well pump is listed for 115/230V operation, but the provided details do not specify well depth or kit contents.

The Goulds HSJ10N is identified as a 1 HP, two-stage convertible water-well jet pump, distinguishing it from listings that do not specify stages. Its 115/230V single-phase designation gives an installer two voltage options to consider for a compatible well setup.

The two-stage designation is the main performance-related detail supplied, while the convertible water-well label indicates its intended pump category. Its stated 115/230V, single-phase configuration allows planning around either listed supply, and the cast-iron material provides a specific construction detail for installation considerations. At 74 pounds, it is a substantial unit to account for when handling and positioning. The available facts do not state well-depth limits or flow rates for matching it to a water source.

Skip it if you need stated well-depth and flow figures; the CrestWave B0H19ZQB78 provides both depth ranges and flow rates.

The HSJ10N fits buyers seeking a two-stage convertible well pump with cast-iron construction and the listed 115/230V single-phase designation. Its 74-pound weight and unspecified depth and flow limits are relevant when planning placement and system fit.

Listed on Amazon as: Goulds HSJ10N 1 HP Convertible Jet Pump 115/230V 1 Phase

#10

10. Dayton 5UXK5

• Material: Cast Iron
• Material Type: Cast Iron

Best for: Specified flow at multiple lifts.

Why it ranks #10: Although it is a 1 HP convertible pump with 115/230V operation, the listing says no ejector is included and provides limited well-depth guidance.

Published flow figures at both 10- and 20-foot lifts give the Dayton 5UXK5 a concrete selection point for buyers comparing output with well conditions. This 1 HP cast-iron convertible jet pump is rated for 115/230V, while its ejector is not included.

At a 10-foot lift, the Dayton is listed at 17.9 GPM at 30 or 40 PSI and 17.8 GPM at 50 PSI, providing several stated operating points for system planning. At 20 feet, the supplied figures include 12.9 GPM at 30 and 50 PSI. Its cast-iron construction and 115/230V rating define material and electrical considerations, but the absent ejector means conversion components must be planned separately.

Skip it if you need the ejector supplied; the Superior Pump 94115 listing includes an eject kit.

The Dayton suits buyers who can use its listed flow figures to evaluate a 1 HP cast-iron pump for their lift and pressure conditions. Its ejector is not included, so account for that requirement when planning a convertible installation.

Listed on Amazon as: Dayton Convertible Jet Pump,CI,1HP,115/230V 5UXK5-1 Each