Best Furnace And Air Conditioner: Practical Features for Easier Everyday Use

A strong furnace and air conditioner system delivers matched heating and cooling capacity, practical installation compatibility, and efficiency suited to the home and climate. These Goodman split-system bundles suit homeowners replacing both major components at once, but the right choice depends on more than the headline SEER2 or AFUE rating. The 10 options range from 1.5- to 3.5-ton cooling capacities, 80% to 96% AFUE furnaces, and upflow or horizontal coil configurations.

Several include installation accessories, while others list only the system components or user manual. You should confirm duct orientation, fuel type, electrical requirements, local regulations, and installer requirements before ordering.

Capacity matching matters because a system that does not suit the home or ductwork may be difficult to install or operate effectively.

The best furnace and air conditioner choice is the Goodman system that matches your home’s cooling load, furnace capacity, duct orientation, and fuel setup. The lineup includes 1.5- to 3.5-ton systems, 13.4- to 15.2-SEER2 cooling, and 80% or 96% AFUE heating. Upflow systems suit upward-distributing ductwork, while the 3.5-ton horizontal model fits horizontal configurations.

For installation convenience, select a bundle with the listed pad, disconnect, power whip, thermostat, and lineset, then verify local requirements with a qualified installer.

Furnace and Air Conditioner System Comparisons

Image	Product	Buy
Best Pick 1	Goodman 3 TON 13.4 SEER2 Upflow R-32 AC System with 80% AFUE 100k BTU two stage Low NOx furnace (GLXS3BN3610 condenser with GM9C801005CX furnace and CAPFA4226C3 coil) Best for: Highest SEER2 Rating Brand: Goodman | Capacity: 3 tons	View on Amazon
Best Pick 2	Goodman 2.5 ton 14 SEER2 Complete Split System with upflow coil and single stage 80% AFUE 80k BTU furnace with install accessories! (GLXS3BN3010 CAPTA3626B3 GR9S800803BN) Best for: Balanced Efficiency Brand: Goodman | Capacity: 2.5 tons	View on Amazon
Best Pick 3	Goodman 2.5 ton 14.5 SEER2 Complete Split System with upflow coil and single stage 96% AFUE 60k BTU furnace with install accessories! (GLXS4BA3010 CAPTA3026B3 GR9S960603BN) Best for: Mid-Range Efficiency Brand: Goodman | Capacity: 2.5 tons	View on Amazon
Best Pick 4	Goodman 2.5 ton 15.2 SEER2 Complete Split System with upflow coil and single stage 96% AFUE 80k BTU furnace with install accessories! (GLXS4BA3010 CAPTA3626B3 GR9S960803BN) Best for: High AFUE Furnace Brand: Goodman | Capacity: 2.5 tons	View on Amazon
Best Pick 5	Goodman 2 TON 13.4 SEER2 Air Conditioner with 80000 BTU 96% Gas Furnace and matching coil (GLXS3BN2410, CAPTA3022B3, GR9S960803BN) Best for: Lower BTU Furnace Brand: Goodman | Capacity: 2 tons	View on Amazon

How We Compared These Products

We compared dimensions, capacity, materials, compatibility, included components, and care requirements across many Amazon listings. These details matter because the product must fit the available space, intended use, setup requirements, and maintenance routine. After examining the wider field, we selected 10 products from Goodman.

The shortlist includes products such as Goodman 3 TON 13.4 SEER2 Upflow R-32 AC System with 80% AFUE 100k BTU two stage Low NOx. Every recommendation is tied to information stated for that specific product; unclear or missing features were treated as unknown rather than filled with assumptions.

Detailed Reviews: Best Furnace And Air Conditioner

1. Goodman 3 TON 13.4 SEER2 Upflow R-32 AC System with 80% AFUE 100k BTU two stage Low NOx furnace (GLXS3BN3610 condenser with GM9C801005CX furnace and CAPFA4226C3 coil)

Best for: Large Home Comfort.

This Goodman 3-ton system delivers a complete home comfort solution with its 13.4 SEER2 R-32 AC, 80% AFUE low NOx furnace, and adaptable coil. It's designed for sustained performance, merging efficient cooling and consistent heating for year-round climate control.

The GLXS3BN3610 condenser features Advanced Copeland Technology for superior reliability and diagnostics. Paired with the GM9C801005CX furnace, this split system offers 3 tons of cooling capacity and 100k BTU heating. It comes pre-charged for 15ft of lineset, simplifying installation, and the natural gas furnace can be converted to liquid propane with an optional kit.

Product Details

Pros

• Complete HVAC system included
• R-32 eco-friendly refrigerant
• Advanced Copeland compressor technology
• Optional LP conversion available

Cons

• Lineset is sold separately.

Ideal for larger homes needing a robust, integrated system. Ensure you account for the separate purchase of the lineset for a complete installation.

2. Goodman 2.5 ton 14 SEER2 Complete Split System with upflow coil and single stage 80% AFUE 80k BTU furnace with install accessories! (GLXS3BN3010 CAPTA3626B3 GR9S800803BN)

Best for: Starter Home Comfort Kit.

This Goodman 2.5-ton split system provides a comprehensive solution, integrating a 14 SEER2 R-32 AC, 80% AFUE furnace, and upflow coil. It includes essential installation accessories for a streamlined setup, promising efficient climate control.

Featuring a 2.5-ton capacity and 80k BTU furnace, this system includes a 25ft lineset, power whip, disconnect, and thermostat. The GLXS3BN3010 condenser utilizes Advanced Copeland Technology for reliable operation. This natural gas furnace can be adapted for liquid propane use with an optional kit, offering installation flexibility.

Product Details

Pros

• Includes installation accessories
• Advanced Copeland compressor
• R-32 refrigerant
• Optional LP conversion

Cons

• Requires new outdoor unit compatibility.

A good choice for homes requiring a complete HVAC package with included installation aids. Verify outdoor unit compatibility before purchase.

3. Goodman 2.5 ton 14.5 SEER2 Complete Split System with upflow coil and single stage 96% AFUE 60k BTU furnace with install accessories! (GLXS4BA3010 CAPTA3026B3 GR9S960603BN)

Best for: High-Efficiency Home System.

Experience enhanced home comfort with this Goodman 2.5-ton split system, featuring a 14.5 SEER2 R-32 AC and a high-efficiency 96% AFUE furnace. It includes essential installation accessories for a complete setup.

This system combines the GLXS4BA3010 AC with a 60k BTU furnace and upflow coil, offering 2.5 tons of cooling. The included 25ft lineset, power whip, disconnect, and thermostat streamline installation. The compressor employs Advanced Copeland Technology for dependable performance, and the furnace supports an optional LP conversion.

Product Details

Pros

• High 96% AFUE furnace efficiency
• Includes installation accessories
• Advanced Copeland compressor
• Optional LP conversion available

Cons

• Requires new outdoor unit compatibility.

Suitable for homeowners prioritizing energy efficiency with a 96% AFUE furnace. Ensure compatibility with your existing outdoor unit setup.

4. Goodman 2.5 ton 15.2 SEER2 Complete Split System with upflow coil and single stage 96% AFUE 80k BTU furnace with install accessories! (GLXS4BA3010 CAPTA3626B3 GR9S960803BN)

Best for: Premium Cooling & Heating.

This Goodman 2.5-ton split system boasts a 15.2 SEER2 R-32 air conditioner and a 96% AFUE furnace, delivering optimal efficiency and comfort. It comes bundled with necessary installation accessories for a comprehensive solution.

The system includes the GLXS4BA3010 AC, a 80k BTU furnace, and an upflow coil, providing 2.5 tons of cooling. Installation is simplified with a 25ft lineset, power whip, disconnect, and thermostat. The unit features Advanced Copeland Technology in its compressor for reliability, and the natural gas furnace can be converted to LP with an optional kit.

Product Details

Pros

• High 15.2 SEER2 cooling efficiency
• 96% AFUE furnace rating
• Includes installation accessories
• Advanced Copeland compressor

Cons

• Requires new outdoor unit compatibility.

An excellent choice for those seeking top-tier cooling and heating efficiency. Verify outdoor unit compatibility before proceeding with installation.

5. Goodman 2 TON 13.4 SEER2 Air Conditioner with 80000 BTU 96% Gas Furnace and matching coil (GLXS3BN2410, CAPTA3022B3, GR9S960803BN)

Best for: Compact Home Comfort.

This Goodman 2-ton split system offers a 13.4 SEER2 R-32 air conditioner paired with an 80,000 BTU 96% AFUE gas furnace and matching coil for efficient home climate control.

The GLXS3BN2410 AC unit is designed with an energy-efficient compressor and factory-installed filter drier. It works with the GR9S960803BN furnace, featuring a heavy-duty aluminized-steel tubular heat exchanger and a stainless-steel secondary heat exchanger for durability and performance.

Product Details

Pros

• Energy-efficient compressor
• 96% AFUE furnace
• Durable heat exchangers
• R-32 coolant

Cons

• Cannot be sold in specific states due to federal guidelines.

Ideal for smaller homes or specific regions not restricted by federal guidelines. Verify local regulations before purchasing. Confirm its stated fit, dimensions, compatibility, and included components against the intended setup before choosing it.

6. Goodman 1.5 Ton 15.2 SEER2 80% AFUE 60,000 BTU R-32 Air Conditioner & Gas Furnace System (GLXS4BA1810, CAPTA2422B3, GR9S800603BN)

Best for: Efficient Small Space System.

This Goodman 1.5-ton split system combines a 15.2 SEER2 R-32 air conditioner with a 60,000 BTU 80% AFUE gas furnace, designed for efficient climate control in smaller areas.

The system's components are engineered for dependable operation, offering 1.5 tons of cooling capacity. The furnace provides 60,000 BTU of heat output with 80% AFUE efficiency. It is designed for residential HVAC performance and comes with a 10-year limited manufacturer warranty upon registration.

Product Details

Pros

• 15.2 SEER2 cooling efficiency
• 80% AFUE furnace
• R-32 refrigerant
• Designed for long-term performance

Cons

• Requires registration for full warranty.

Suitable for smaller homes or specific zones needing efficient cooling and heating. Ensure timely registration to activate the full warranty terms.

7. Goodman 2 Ton 13.8 SEER2 80% AFUE 60,000 BTU R-32 Air Conditioner & Gas Furnace System (GLXS3BN2410, CAPTA2422A3, GR9S800603AN)

Best for: Upflow Residential Comfort.

This Goodman 2-ton split system features a 13.8 SEER2 R-32 air conditioner and a 60,000 BTU 80% AFUE gas furnace, engineered for dependable, long-term residential performance in upflow configurations.

Designed for upflow airflow, this system distributes conditioned air upward, commonly installed in basements. The GLXS3BN2410 AC unit and GR9S800603AN furnace are built with quality components for season-after-season reliability. It offers 2 tons of cooling and 60k BTU heating.

Product Details

Pros

• Designed for upflow airflow
• Dependable long-term performance
• 80% AFUE furnace
• R-32 refrigerant

Cons

• Optional LP kit not included.

Best for homes with an upflow duct system, often found in basements. Consider the optional LP kit if propane fuel is preferred.

8. Goodman 3.5 TON 15.2 SEER2 Upflow R-32 AC System with 80% AFUE 100k BTU furnace (GLXS4BA4210 condenser with GR9S801005CN furnace and CAPTA4230C3 coil)

Best for: Large Capacity Comfort.

This Goodman 3.5-ton split system delivers efficient 15.2 SEER2 cooling with R-32 refrigerant and a 100k BTU 80% AFUE furnace, designed for robust home comfort in an upflow configuration.

The GLXS4BA4210 condenser features a copper tube enhanced aluminum fin coil and is AIM ACT and Montreal Protocol compliant. Paired with the GR9S801005CN furnace, this system provides ample capacity for larger homes, with the furnace pre-charged for 15ft of tubing length.

Product Details

Pros

• High 3.5-ton capacity
• 15.2 SEER2 cooling efficiency
• AIM ACT compliant
• 80% AFUE furnace

Cons

• Coil material is a copper aluminum mix.

Suitable for larger residences needing significant cooling and heating capacity. The mixed-material coil may be a consideration for specific environmental needs.

9. Goodman 3.5 TON 15.2 SEER2 Horizontal R-32 AC System with 80% AFUE 100k BTU furnace (GLXS4BA4210 condenser with GR9S801005CN furnace and CHPTA4830C3 coil)

Best for: Horizontal System Solution.

This Goodman 3.5-ton horizontal split system offers 15.2 SEER2 cooling with R-32 refrigerant and a 100k BTU 80% AFUE furnace, providing efficient and sustained performance for climate control.

The GLXS4BA4210 air conditioner is paired with the CHPTA4830C3 horizontal coil and GM9S801005CN furnace. This AHRI certified system provides 3.5 tons of cooling and 100k BTU heating, featuring a factory-installed filter drier for enhanced operation and a ten-year limited parts warranty upon registration.

Product Details

Pros

• Horizontal installation design
• 15.2 SEER2 cooling efficiency
• AHRI Certified
• R-32 refrigerant

Cons

• Furnace does not include specific components (details omitted).

Ideal for homes requiring a horizontal installation configuration. Verify furnace component inclusion details for your specific needs. Confirm its stated fit, dimensions, compatibility, and included components against the intended setup before choosing it.

10. Goodman 2 Ton 14.5 SEER2 96% AFUE 60,000 BTU Low NOx R-32 Air Conditioner & Gas Furnace System (GLXS4MA2410, CAPTA3022B3, GR9T960603BN)

Best for: Efficient Upflow Comfort.

This Goodman 2-ton split system delivers efficient 14.5 SEER2 cooling and 96% AFUE heating with its R-32 AC and Low NOx furnace, designed for dependable, long-term residential performance in upflow configurations.

Engineered for upflow airflow, this system is suited for installations where air is distributed upward, often in basements. The GLXS4MA2410 AC and GR9T960603BN furnace are built with quality components for consistent operation. It offers 2 tons of cooling and 60,000 BTU heating.

Product Details

Pros

• High 96% AFUE efficiency
• Designed for upflow airflow
• Low NOx emissions
• R-32 refrigerant

Cons

• Optional LP kit not included.

Best for homes with an upflow duct system prioritizing high heating efficiency and low NOx emissions. Consider the optional LP kit if propane fuel is preferred.

What Buyers Often Overlook

Sizing, duct orientation, and installation fit

Choose cooling capacity and coil orientation from the home’s existing requirements, not from the product count alone. The listed systems span 1.5 tons, 2 tons, 2.5 tons, 3 tons, and 3.5 tons, with furnace outputs described from 60,000 to 100,000 BTU. Several products use upflow coils for installations where conditioned air moves upward through the duct system, while Product 9 specifically uses a horizontal coil and horizontal system.

Physical dimensions also vary: Products 6 and 7 list 28 by 26 by 55.5 inches, while Product 9 lists a 35.5-inch depth, width, and height for its outdoor unit. Product 2, 3, and 4 include a 25-foot lineset, equipment pad, electrical whip, disconnect, and thermostat.

Other bundles list fewer accessories, so confirm space, duct direction, lineset needs, and electrical compatibility before purchase.

The Key Product Trade-Off

Efficiency, furnace output, and fuel compatibility trade-offs

Higher efficiency can change the system’s heating and cooling profile, but it does not replace correct capacity or fuel verification. Cooling ratings range from 13.4 SEER2 on Products 1 and 5 to 15.2 SEER2 on Products 4, 6, 8, and Heating efficiency is either 80% AFUE or 96% AFUE in the supplied systems, with Product 10 combining 14.5 SEER2 cooling and 96% AFUE heating in a low-NOx furnace.

The systems are natural-gas models; several listings state that an optional liquid-propane kit can enable LP use, but the kit is sold separately. Product 5 also lists geographic sales restrictions.

R-32 refrigerant appears across the newer systems, while Product 1 adds a two-stage furnace and low-NOx designation. Match the furnace type, refrigerant requirements, and local rules to the installation rather than selecting by efficiency rating alone.

Best Furnace And Air Conditioner: Buyer's Guide

Fit, Dimensions, and Compatibility

Compare the listed dimensions with the intended counter, cabinet, appliance, storage, or installation space. Confirm model compatibility and connection requirements where they are supplied. A useful feature cannot compensate for a product that does not physically fit or work with the buyer’s existing setup.

Capacity, Output, and Operating Format

Match listed capacity, volume, output, and operating mode to the actual household or work routine. Larger figures can support heavier use, while a smaller format may be easier to place and maintain. Treat daily output, immediate storage, and container capacity as separate specifications when the listing distinguishes them.

Materials, Construction, and Care

Use the listed materials and care instructions to judge cleaning effort, storage conditions, and compatibility with the intended use. Dishwasher, freezer, food-contact, or weather-related claims are included only when supplied for that product. Check whether routine care fits the way the product will be used.

Included Components and Setup Needs

Review the included components before planning installation or first use. Hoses, adapters, lids, paddles, bowls, brushes, controls, and manuals vary by listing. Confirm power, water, assembly, or accessory requirements from the supplied product information rather than assuming that separately pictured parts are included.

Which Should You Choose?

Choose a 1.5-ton system when the smaller listed cooling capacity matches the home and existing ductwork; Product 6 pairs it with a 60,000-BTU, 80% AFUE furnace. For a 2-ton setup, Product 7 offers 13.8 SEER2 cooling and 80% AFUE heat, while Product 10 adds 14.5 SEER2, 96% AFUE, and low-NOx heating. Buyers needing 2.5 tons can choose 14 SEER2 with 80% AFUE, or move to 14.5 or 15.2 SEER2 with 96% AFUE.

Product 1 suits a 3-ton requirement and adds two-stage, low-NOx heating. Products 8 and 9 serve 3.5-ton needs, with Product 8 using upflow and Product 9 horizontal configuration.

Select the included-accessory bundle when those installation parts match your project, and verify fuel, voltage, warranty conditions, and local installation rules first.

Quick Buying Checklist

• Confirm the complete dimensions against the available space.
• Verify model, accessory, connection, and appliance compatibility.
• Match capacity or output to the expected amount of use.
• Compare materials and care instructions with the maintenance routine.
• Check the included components before planning setup or first use.
• Confirm listed power, water, storage, or installation requirements where applicable.

Frequently Asked Questions

What is SEER2 and AFUE?

SEER2 (Seasonal Energy Efficiency Ratio 2) measures cooling efficiency, with higher numbers indicating better performance. AFUE (Annual Fuel Utilization Efficiency) measures furnace efficiency, representing the percentage of fuel converted into heat. Higher AFUE ratings mean less wasted energy and potentially lower heating bills.

What is the difference between single-stage and two-stage systems?

Single-stage systems operate at full capacity only, cycling on and off frequently. Two-stage systems have a low and high setting, running on low for longer periods. This provides more consistent temperatures, better humidity control, and quieter operation compared to single-stage units.

Why is R-32 refrigerant important?

R-32 refrigerant is an environmentally friendlier option with a lower global warming potential compared to older refrigerants. It also offers improved energy efficiency, meaning your system can cool your home effectively while potentially using less electricity.

What does 'Low NOx' mean for a furnace?

Low NOx (Nitrogen Oxides) furnaces are designed to produce fewer emissions during the combustion process. This is an environmental consideration, contributing to cleaner air quality. These systems meet stricter emissions standards for gas furnaces.

How do I choose the right system size (tonnage and BTU)?

System size is crucial for optimal performance and efficiency. Tonnage refers to the AC’s cooling capacity, while BTU refers to the furnace’s heating capacity. An improperly sized unit can lead to discomfort, increased energy use, and premature wear.

Final Words

When selecting a furnace and air conditioner system, prioritize efficiency ratings like SEER2 for cooling and AFUE for heating. Consider features such as R-32 refrigerant and Low NOx emissions for environmental benefits. Matching the system’s capacity to your home’s needs ensures optimal comfort and performance.