Best Index Valve Sprinkler System for Multi-Zone Irrigation

Best Index Valve Sprinkler System

A strong index valve sprinkler system choice matches your zone count, available flow, and pipe connections; the K-Rain 4404 suits buyers seeking four zones with a stated 10 GPM minimum and 25–75 PSI range. This roundup compares ten K-Rain and Fimco valves, from compact ABS models to die-cast metal options and six-outlet valves. Several are designed for pump-driven irrigation, while selected K-Rain models carry reclaimed-water designations.

These differences matter because an index valve advances water between outlets, so the wrong zone configuration, flow, or connection size can prevent a suitable installation. Check your system’s pipe size and operating conditions before choosing.

The rankings prioritize a useful fit for general sprinkler systems, then account for listed capacity, pressure or flow details, material, and included zone cams.

The K-Rain 4404 is the Best Overall choice because it offers four outlets for four zones, a stated 10 GPM minimum, and a 25–75 PSI operating range. Those specifications make it a clear general-purpose pick among the listed models when your system matches its connection requirements. If you need more zones, consider a six-zone option instead; if your system uses reclaimed water or higher flow, choose a model specifically listed for that application.

Our Top Picks

K-Rain 4404 Indexing ValveBest Overall

K-Rain 4404 Indexing Valve

Four outlets serve four zones, with a stated 10 GPM minimum and 25–75 PSI range for buyers seeking a clearly specified general-purpose valve.

View on Amazon
K-Rain 6605 Indexing ValveMost Zones

K-Rain 6605 Indexing Valve

Its six outlets serve five zones, and the listed 15 GPM minimum and 25–150 PSI range suit systems with greater flow capacity.

View on Amazon
K-Rain 6404 Indexing ValveDie-Cast 4-Zone

K-Rain 6404 Indexing Valve

This four-outlet, four-zone model has a metal die-cast body and a stated 15 GPM minimum for higher-flow irrigation setups.

View on Amazon

Compare Indexing Valve Options by System Needs

#ProductdimensionsWeightMaterialInlet Connection SizeBuy
15 x 5 x 5 in16 ozAcrylonitrile Butadiene Styrene (ABS)1.5 inView on Amazon
25 x 5 x 5 in2 lbMetal1 inView on Amazon
35 x 5 x 5 in2 lbMetal—View on Amazon
4
Fimco 4006 Hydro Valve4. Fimco 4006 Hydro ValveSix-Outlet Cam Option
7 x 7 x 7 in—Stainless Steel1.5 inView on Amazon
5
Fimco Mini Indexing Valve5. Fimco Mini Indexing ValveCompact six-outlet slip-fit layouts
—1.84 lb——View on Amazon
6
K-Rain 4402 Indexing Valve6. K-Rain 4402 Indexing ValveTwo-zone pump-fed systems
5 x 5 x 5 in16 ozAcrylonitrile Butadiene Styrene (ABS)1 inView on Amazon
75 x 5 x 5 in—Acrylonitrile Butadiene Styrene (ABS)0.75 inView on Amazon
8
K-Rain 6404-RCW Valve8. K-Rain 6404-RCW ValveFour-zone reclaimed-water pump systems
—2 lb——View on Amazon
9
K-Rain 4606-RCW Valve9. K-Rain 4606-RCW ValveSix-zone reclaimed-water installations
5 x 5 x 5 in—Acrylonitrile Butadiene Styrene (ABS)1 inView on Amazon
10
K-Rain 4403 Indexing Valve10. K-Rain 4403 Indexing ValveThree zones, one controller station
5 x 5 x 5 in—Acrylonitrile Butadiene Styrene (ABS)1 inView on Amazon

Detailed Reviews: Best Index Valve Sprinkler System

K-Rain 4404 Indexing Valve

#1 · Best Overall

1. K-Rain 4404 Indexing Valve

  • dimensions: 5 x 5 x 5 in
  • Weight: 16 oz
  • Material: Acrylonitrile Butadiene Styrene (ABS)
  • Inlet Connection Size: 1.5 in

Best for: Four-zone compact installations.

Why it ranks #1: Four outlets serve four zones, with a stated 10 GPM minimum and 25–75 PSI range for buyers seeking a clearly specified general-purpose valve.

Four outlets and four zones give the K-Rain 4404 a straightforward role in a four-zone sprinkler layout, while its stated 10 GPM minimum identifies the flow threshold buyers need to consider. Its compact 5-inch dimensions also make the valve’s physical footprint clear when planning a valve-box installation.

The 1.5-inch inlet and outlet connections are central installation details: they help buyers plan the adjoining pipework around the valve’s listed connection sizes. The specified operating pressure range of 25–75 PSI and 10 GPM minimum provide useful system-planning boundaries before installation. Its 5-by-5-by-5-inch ABS body gives a defined footprint and material choice, while the four-outlet, four-zone configuration suits projects needing four indexed zones from this valve.

Pros
  • Four outlets serve four zones
  • 10 GPM minimum is specified
  • 1.5-inch inlet and outlet connections are listed
  • Compact 5-by-5-by-5-inch ABS body
Cons
  • The specified pressure range is limited to 25–75 PSI.

Skip it if you need six outlets or a pressure rating above 75 PSI; the K-Rain 6000 Series 6605 lists a 25–150 PSI range.

A buyer planning a four-zone system with 1.5-inch connections can use the 4404’s dimensions, material, flow minimum, and pressure range to assess fit. Its stated pressure boundary is 25–75 PSI, so account for that before choosing it.

Full product details
BrandK-Rain
Included ComponentsK Rain 4404 Indexing Valve, 4 Outlet 4 Zone, 10 GPM Min, 25-75 PSI
Inlet Connection Size1.5 inches
Item Dimensions5 x 5 x 5 inches
Item Weight16 ounces
Dimensions5 x 5 x 5 inches
ManufacturerK Rain
Part Number4404
MaterialAcrylonitrile Butadiene Styrene (ABS)
Model NumberAMZ-4404
Outlet Connection Size1.5 inches
Sizenot_applicable
Thread Size1/2 inch
Additional InformationImportant Information Proposition 65 Warning for California Consumers WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov

Listed on Amazon as: K Rain 4404 Indexing Valve, 4 Outlet 4 Zone, 10 GPM Min, 25-75 PSI

View on Amazon
K-Rain 6605 Indexing Valve

#2 · Most Zones

2. K-Rain 6605 Indexing Valve

  • dimensions: 5 x 5 x 5 in
  • Weight: 2 lb
  • Material: Metal
  • Inlet Connection Size: 1 in

Best for: Five zones for high-pressure systems.

Why it ranks #2: Its six outlets serve five zones, and the listed 15 GPM minimum and 25–150 PSI range suit systems with greater flow capacity.

A 25–150 PSI range and 15 GPM minimum define this K-Rain 6000 Series valve for buyers planning a five-zone system with sufficient flow. Its six-outlet configuration and die-cast metal body support the listed multi-zone, pump-fed use case, while the product description also identifies an atmospheric vacuum breaker.

The valve feeds five zones from one six-outlet body, avoiding a manifold of separate solenoid valves according to the supplied details. Its die-cast metal body and single-part stem-and-disc indexing mechanism are described for pump-fed pressure cycling and field service. The stated 15 GPM minimum and 25–150 PSI range help buyers assess system suitability; the product information cautions that undersized flow may not reliably trip the indexing disc. A 1-inch inlet is listed.

Pros
  • Six outlets serve five zones
  • Die-cast metal body
  • 15 GPM minimum and 25–150 PSI range specified
  • Built-in atmospheric vacuum breaker is described
Cons
  • Flow below the stated 15 GPM minimum may not reliably trip the indexing disc.

Skip it if you need six zones rather than five; the K-Rain 4606-RCW is listed as a six-outlet, six-zone valve.

This K-Rain suits a five-zone pump-fed system within its stated 25–150 PSI range and at or above its 15 GPM minimum. Treat adequate flow as essential to reliable indexing, and account for its 1-inch inlet.

Full product details
BrandK-Rain
Included ComponentsK-Rain 6000 Series Indexing Valve, 6-Outlet 5-Zone, Die-Cast Metal Body
Inlet Connection Size1 inches
Item Dimensions5 x 5 x 5 inches
Item Weight2 pounds
Dimensions5 x 5 x 5 inches
ManufacturerK-Rain
Part Number6605
MaterialMetal
Model Number1BLO-HXWT-CSZM
Sizenot_applicable

Listed on Amazon as: K-Rain 6000 Series Indexing Valve, 6-Outlet 5-Zone, Die-Cast Metal Body

View on Amazon
K-Rain 6404 Indexing Valve

#3 · Die-Cast 4-Zone

3. K-Rain 6404 Indexing Valve

  • dimensions: 5 x 5 x 5 in
  • Weight: 2 lb
  • Material: Metal

Best for: Four zones with die-cast construction.

Why it ranks #3: This four-outlet, four-zone model has a metal die-cast body and a stated 15 GPM minimum for higher-flow irrigation setups.

A die-cast metal body distinguishes this K-Rain 6000 Series valve, which serves four zones through four outlets and specifies a 15 GPM minimum. Those concrete details make it a candidate for buyers planning a four-zone installation whose flow and connection requirements align with the product information.

The four-outlet, four-zone configuration identifies the valve’s intended zone capacity, while its 15 GPM minimum is an important flow threshold to consider during system planning. Its die-cast construction is described in the title, and the specifications list metal as the material. The 5.75-by-5.75-by-5.75-inch dimensions and 2-pound weight help buyers account for the unit in an installation plan. Connection sizes are not supplied here, so the listed data do not establish pipe compatibility.

Pros
  • Four outlets serve four zones
  • 15 GPM minimum is specified
  • Die-cast metal construction
  • 5.75-inch dimensions and 2-pound weight are listed
Cons
  • Inlet and outlet connection sizes are not provided in the supplied specifications.

Skip it if you need listed inlet and outlet dimensions before planning pipework; the K-Rain 4404 specifies 1.5-inch connections.

Consider this valve for a four-zone project where the 15 GPM minimum and metal body match the plan. The supplied specifications give dimensions and weight but no connection sizes, so pipework fit remains an important boundary.

Full product details
BrandK-Rain
Included ComponentsK-Rain 6000 Series Indexing Valve – 4 Outlet, 4 Zone, Die-Cast, 15 GPM
Item Dimensions5 x 5 x 5 inches
Item Weight2 pounds
Dimensions5 x 5 x 5 inches
ManufacturerK-Rain
Part Number6404
MaterialMetal
Model Number1BLO-HXWT-CRE6
Size5.75 inches x 5.75 inches x 5.75 inches

Listed on Amazon as: K-Rain 6000 Series Indexing Valve – 4 Outlet, 4 Zone, Die-Cast, 15 GPM

View on Amazon
Fimco 4006 Hydro Valve

#4 · Six-Outlet Cam Option

4. Fimco 4006 Hydro Valve

  • dimensions: 7 x 7 x 7 in
  • Material: Stainless Steel
  • Inlet Connection Size: 1.5 in

Best for: Pump-fed six-outlet irrigation.

Why it ranks #4: The stainless-steel valve has six outlets and includes five- and six-zone cams, giving pump-driven systems two listed zone configurations.

Six outlets and included five- and six-zone cams let this Fimco Hydro Indexing Valve serve a pump-driven irrigation setup with either cam configuration. Its stainless-steel construction and 1.5-inch slip-fit pipe specification help narrow its fit to installations planned around that larger pipe size and the selected zone count.

The valve has one inlet and six outlets, and its supplied five- and six-zone cams allow the installer to choose between those zone arrangements. The description recommends it for pump-driven irrigation, giving pump-system buyers a stated use case rather than a generic sprinkler application. It accepts 1.5-inch slip-fit PVC; the supplied guidance notes that the actual inlet and outlet diameter is 1.9 inches. Checking the inside-diameter pipe size before installation is therefore essential.

Pros
  • One inlet and six outlets
  • Includes five- and six-zone cams
  • Recommended for pump-driven irrigation
  • Stainless-steel material is specified
Cons
  • The 1.5-inch slip-fit configuration has 1.9-inch actual inlet and outlet diameters.

Skip it if you need a smaller slip-fit valve; Fimco’s 1-1/4-inch Mini Indexing Valve 9266-2006 lists 1-1/4-inch connections.

Choose this Fimco for a pump-driven system needing six outlets and a five- or six-zone cam option. Its 1.5-inch slip-fit PVC sizing—and 1.9-inch actual port diameter—make careful pipe measurement a key installation consideration.

Full product details
BrandFimco
Included ComponentsIncludes 5 and 6 zone Cams
Inlet Connection Size1.5 inches
Item Dimensions7 x 7 x 7 inches
Dimensions7 x 7 x 7 inches
ManufacturerFIMCO MANUFACTURING INC.
Part Number92696
MaterialStainless Steel
Model Number92696
Outlet Connection Size1.5 inches
Size1 1/2"
Thread Size1.9 inches

Listed on Amazon as: FIMCO 1 1/2" 6 Outlet Standard Hydro Indexing Valve with 5,6 Zone Cams for Irrigation

View on Amazon
Fimco Mini Indexing Valve

#5

5. Fimco Mini Indexing Valve

  • Weight: 1.84 lb

Best for: Compact six-outlet slip-fit layouts.

Why it ranks #5: Its six 1-1/4-inch slip-fit outlets and included five- and six-zone cams suit buyers needing a multi-zone Fimco valve.

Six 1-1/4-inch slip-fit outlets give this Fimco Mini Indexing Valve a clear fit for multi-zone systems using that connection size. Its included five- and six-zone cams let the setup use either listed zone arrangement, while manual or automatic operation provides two ways to run the valve.

The single inlet and six outlets are all specified as 1-1/4-inch slip fit, which helps buyers plan PVC connections around a consistent listed size. Included five- and six-zone cams let the valve support either of those zone counts, so the chosen cam can match the intended irrigation layout. Manual or automatic operation offers flexibility in how the valve is run. Its 8-by-8-by-8-inch product dimensions also give installers a concrete footprint to consider.

Pros
  • Six outlets, all 1-1/4-inch slip fit
  • Includes five- and six-zone cams
  • Can operate manually or automatically
  • 8-by-8-by-8-inch dimensions are listed
Cons
  • Its listed slip-fit connection size is 1-1/4 inches.

Skip it if you need 1.5-inch slip-fit connections; the Fimco Standard Hydro Indexing Valve 92696 is listed for that pipe size.

This Fimco suits a buyer automating several zones with 1-1/4-inch slip-fit connections and a choice of five- or six-zone cam. Check the available installation space against its listed 8-inch dimensions.

Full product details
BrandFimco
Item Weight1.84 pounds
Item model number9266
ManufacturerFIMCO MANUFACTURING INC.
Dimensions8 x 8 x 8 inches

Listed on Amazon as: FIMCO Manufacturing Inc. 1 1/4" 6 Outlet Mini Indexing Valve with 5 and 6 Zone Cams Item# 9266-2006

View on Amazon
K-Rain 4402 Indexing Valve

#6

6. K-Rain 4402 Indexing Valve

  • dimensions: 5 x 5 x 5 in
  • Weight: 16 oz
  • Material: Acrylonitrile Butadiene Styrene (ABS)
  • Inlet Connection Size: 1 in

Best for: Two-zone pump-fed systems.

Why it ranks #6: This ABS-body model provides four outlets for two zones and lists a 1-inch inlet connection for buyers with a smaller system.

Hydraulic cycling lets this K-Rain 4402 index a two-zone pump-fed sprinkler system without control wires, advancing zones as water flow starts and stops. The four-outlet configuration and ABS body make its use case specific to buyers planning a two-zone layout with the listed valve connections.

The indexing mechanism cycles zones hydraulically when flow starts and stops, eliminating the need for a control wire to each zone as described in the product details. Four outlets serve the two-zone configuration, while the high-strength ABS body is identified as suitable for wet valve-box service and resistant to corrosion. The listed inlet connection is 1 inch, and the title identifies the model as 1-1/4; buyers should treat those supplied size details carefully when planning installation.

Pros
  • Hydraulic indexing for two zones
  • Four outlets
  • ABS body described as corrosion resistant
  • 1-inch inlet connection is specified
Cons
  • The supplied specifications do not list an outlet connection size.

Skip it if you need a six-zone reclaimed-water valve; the K-Rain 4606-RCW is specifically listed for six outlets and six zones.

This K-Rain suits a two-zone pump-fed layout where hydraulic indexing can replace separate control wiring. Its 1-inch inlet is specified, but the supplied information does not establish an outlet size, so plan connections accordingly.

Full product details
BrandK-Rain
Included ComponentsK-Rain 4000 Series Indexing Valve, Model 4402, 4 Outlet 2 Zone, 1-1/4
Inlet Connection Size1 inches
Item Dimensions5 x 5 x 5 inches
Item Weight16 ounces
Dimensions5 x 5 x 5 inches
ManufacturerK-Rain
Part Number4402
MaterialAcrylonitrile Butadiene Styrene (ABS)
Model Number1BLO-HXWN-H5TD
Sizenot_applicable
Thread Size1 inches

Listed on Amazon as: K-Rain 4000 Series Indexing Valve, Model 4402, 4 Outlet 2 Zone, 1-1/4

View on Amazon
K-Rain 4402-RCW Valve

#7 · Reclaimed Water

7. K-Rain 4402-RCW Valve

  • dimensions: 5 x 5 x 5 in
  • Material: Acrylonitrile Butadiene Styrene (ABS)
  • Inlet Connection Size: 0.75 in

Best for: Two-zone reclaimed-water systems.

Why it ranks #7: The two-zone, four-outlet valve is specifically designated for reclaimed water and lists 0.75-inch inlet and outlet connections.

A purple-top reclaimed-water designation sets this K-Rain 4000 Series model apart for non-potable irrigation installations that require a dedicated reclaimed-water component. Its water-driven cam steps between two zones through four outlets, allowing automatic zone indexing without an electric controller, according to the supplied product details.

The water-driven cam mechanism advances between two zones through four outlets, so the listed arrangement does not need an electric controller to perform that indexing. This can avoid the solenoids, wire runs, and timer programming associated with a standard valve manifold, as described in the product information. The purple-top designation identifies the reclaimed-water variant for dedicated non-potable irrigation use. Its ABS body and 0.75-inch inlet and outlet connections provide additional material and pipe-planning details.

Pros
  • Two zones served through four outlets
  • Water-driven cam indexes without an electric controller
  • Purple-top reclaimed-water designation
  • 0.75-inch inlet and outlet connections
Cons
  • This configuration serves only two zones.

Skip it if you need six irrigation zones from one valve; the K-Rain 4606-RCW is listed as a six-outlet, six-zone model.

This model fits a two-zone reclaimed-water installation where its purple-top designation and 0.75-inch connections suit the plan. Its water-driven indexing avoids an electric controller, but its listed zone count remains two.

Full product details
BrandK-Rain
Included ComponentsK-Rain 4000 Series Indexing Valve, 4 Outlet 2 Zone, Reclaimed Water
Inlet Connection Size0.75 inches
Item Dimensions5 x 5 x 5 inches
Dimensions5 x 5 x 5 inches
ManufacturerK-Rain
Part Number4402-RCW
MaterialAcrylonitrile Butadiene Styrene (ABS)
Model Number1BLO-HXWN-ICYP
Outlet Connection Size0.75 inches
Size4 Outlet
Thread Size0.75 inches

Listed on Amazon as: K-Rain 4000 Series Indexing Valve, 4 Outlet 2 Zone, Reclaimed Water

View on Amazon
K-Rain 6404-RCW Valve

#8

8. K-Rain 6404-RCW Valve

  • Weight: 2 lb

Best for: Four-zone reclaimed-water pump systems.

Why it ranks #8: This reclaimed-water model serves four zones through six outlets and has a stated 15 GPM minimum, but connection details are not supplied.

Six outlets serving four zones give this K-Rain 6000 Series reclaimed-water valve a higher-outlet configuration for pump-fed and high-flow municipal irrigation. Its metal die-cast body, field-serviceable stem-and-disc mechanism, and 15 GPM minimum identify practical considerations for buyers planning a serviceable system with adequate flow.

The valve indexes through four zones from one six-outlet body, which the product information says can cut wiring compared with electric solenoids at each station. A metal die-cast body and single stem-and-disc moving part are specified for high-pressure pump stations, and the mechanism can be serviced or rebuilt in the field rather than replacing the whole assembly. Its 15 GPM minimum is a key flow requirement to evaluate before installation in a pump-fed system.

Pros
  • Six outlets serve four zones
  • 15 GPM minimum is specified
  • Metal die-cast body
  • Stem-and-disc mechanism can be serviced or rebuilt in the field
Cons
  • The stated minimum flow requirement is 15 GPM.

Skip it if you need six separate zones from one valve; the K-Rain 4606-RCW is listed as a six-outlet, six-zone model.

This valve fits reclaimed-water pump-fed or high-flow municipal projects needing four zones and a field-serviceable mechanism. Its 15 GPM minimum is a meaningful system boundary, so verify that planned flow meets the stated requirement.

Full product details
BrandK-Rain
Item Weight2 pounds
Item model number6404-RCW
ManufacturerK-RAIN
Dimensions5.75 x 5.75 x 5.75 inches

Listed on Amazon as: K-Rain 6000 Series Reclaimed Water Indexing Valve, 6 Outlet, 4 Zone

View on Amazon
K-Rain 4606-RCW Valve

#9

9. K-Rain 4606-RCW Valve

  • dimensions: 5 x 5 x 5 in
  • Material: Acrylonitrile Butadiene Styrene (ABS)
  • Inlet Connection Size: 1 in

Best for: Six-zone reclaimed-water installations.

Why it ranks #9: Its six outlets serve six zones and its reclaimed-water designation fits non-potable irrigation, though the listed outlet connection is 0.5 inch.

Six outlets and six zones make the K-Rain 4606-RCW a fit for reclaimed-water layouts needing more indexed zones from one valve. Its reclaimed-water designation identifies its intended non-potable irrigation role, while the supplied description says the cam advances to the next outlet with each solenoid cycle.

The six-outlet, six-zone configuration can replace a full zone-valve manifold in the described reclaimed-water applications, reducing wiring and valve-box clutter. Its 4606-RCW designation is specifically associated with effluent and non-potable irrigation systems, including golf course, HOA, and municipal reclaimed-water specifications. The ABS body is listed as the material. A 1-inch inlet and 0.5-inch outlets are specified, details buyers should use when planning the installation’s pipe connections.

Pros
  • Six outlets serve six zones
  • 4606-RCW reclaimed-water designation
  • ABS body
  • 1-inch inlet and 0.5-inch outlets are specified
Cons
  • The listed outlet connection size is 0.5 inch.

Skip it if you need metal construction and a 15 GPM minimum; the K-Rain 6000 Series 6404-RCW lists both features.

Choose this model for reclaimed-water projects needing six zones and a single indexing valve, including the listed golf course, HOA, and municipal use cases. Its 0.5-inch outlets are an important connection-size boundary.

Full product details
BrandK-Rain
Included ComponentsK-Rain 4606-RCW Indexing Valve, 6 Outlet 6 Zone, Reclaimed Water Use
Inlet Connection Size1 inches
Item Dimensions5 x 5 x 5 inches
Dimensions5 x 5 x 5 inches
ManufacturerK-Rain
Part Number4606-RCW
MaterialAcrylonitrile Butadiene Styrene (ABS)
Model Number1BLO-HXWT-D78K
Outlet Connection Size0.5 inches
Size5.75 inches x 5.75 inches x 5.75 inches

Listed on Amazon as: K-Rain 4606-RCW Indexing Valve, 6 Outlet 6 Zone, Reclaimed Water Use

View on Amazon
K-Rain 4403 Indexing Valve

#10

10. K-Rain 4403 Indexing Valve

  • dimensions: 5 x 5 x 5 in
  • Material: Acrylonitrile Butadiene Styrene (ABS)
  • Inlet Connection Size: 1 in

Best for: Three zones, one controller station.

Why it ranks #10: This ABS model serves three zones through four outlets, but its supplied specifications give no flow or pressure range for comparison.

The internal cam advances one position per cycle, letting this K-Rain valve run three sprinkler zones from one controller station rather than requiring a separate solenoid for each zone. That indexing approach can simplify a retrofit to an older controller by reducing the wiring and labor involved in separate zone control.

Its four-outlet, three-zone arrangement gives a project one valve body for three active zones, with the internal cam stepping between positions as cycles run. The supplied details specifically describe using one controller station, which can reduce separate solenoid wiring during a retrofit. A high-strength ABS body is described as resisting pitting, rust, and corrosion in wet valve-box service. The listed 1-inch inlet and 1.25-inch outlet connections are important pipework planning points.

Pros
  • Runs three zones from one controller station
  • Internal cam advances with each cycle
  • ABS body resists pitting, rust, and corrosion
  • 1-inch inlet and 1.25-inch outlets are specified
Cons
  • This configuration serves three zones, not four.

Skip it if you need four zones from one valve; the K-Rain 4404 is listed as a four-outlet, four-zone model.

This valve suits a three-zone retrofit where reducing separate solenoid wiring and controller stations matters. Its listed 1-inch inlet and 1.25-inch outlets should guide pipework planning, and its zone count is specifically three.

Full product details
BrandK-Rain
Included ComponentsK-Rain 4000 Series Indexing Valve, 4 Outlet 3 Zone, ABS Body
Inlet Connection Size1 inches
Item Dimensions5 x 5 x 5 inches
Dimensions5 x 5 x 5 inches
ManufacturerK-Rain
Part Number4403
MaterialAcrylonitrile Butadiene Styrene (ABS)
Model Number1BLO-HXWN-GMEU
Outlet Connection Size1.25 inches
Size1.25 Inch
Thread Size1 inches

Listed on Amazon as: K-Rain 4000 Series Indexing Valve, 4 Outlet 3 Zone, ABS Body

View on Amazon

Avoiding flow and indexing problems

A valve may fail to advance reliably if the system does not meet its minimum flow requirement. The K-Rain 4404 lists a 10 GPM minimum, while the K-Rain 6404 and K-Rain 6605 list 15 GPM minimums; the Fimco descriptions identify pump-driven irrigation use but do not provide a numerical minimum. Confirm the flow available while the intended zone is operating, rather than relying only on a pump’s headline rating.

Also check that operating pressure fits the valve: the 4404 lists 25–75 PSI, whereas the K-Rain 6605 lists 25–150 PSI. These figures are not interchangeable guarantees for every installation.

If a system is below a stated minimum, choose a compatible model or resolve the flow mismatch before installing. The product information does not specify troubleshooting steps, so do not assume a particular symptom proves the valve itself is defective.

Connection sizing and zone-count traps

Matching the nominal pipe size and the valve’s outlet arrangement is essential; similar-looking connection numbers do not establish compatibility. The Fimco 4006 Hydro Valve listing cautions that pipe size is measured by inside diameter and says its 1-1/2-inch slip-fit pipe connections have actual inlet and outlet diameters of 1.9 inches. The Fimco Mini Indexing Valve instead lists 1-1/4-inch slip-fit outlets, while K-Rain entries give differing connection sizes, including 0.75-inch and 1-inch listings.

Check the exact model and fitting type against the pipe already installed. Zone count also needs care: some valves have more outlets than zones, such as the K-Rain 6605’s six outlets for five zones, and the Fimco 4006 includes cams for either five or six zones.

Do not infer the active zone configuration from outlet count alone; verify the intended cam and installation requirements.

How to Choose an Index Valve Sprinkler System

Zone count and outlet layout

Choose a valve whose zone configuration matches the number of irrigation areas you need to run. The listed options range from two zones on the K-Rain 4402 and 4402-RCW to four zones on the K-Rain 4404 and 6404, five zones on the K-Rain 6605, and six zones on the K-Rain 4606-RCW. The Fimco 4006 accepts five- or six-zone cams, while its six outlets do not by themselves tell you which cam is installed.

Buyers with a small two-area system can favour a two-zone model; larger pump-fed layouts can look to the five- or six-zone options. Count zones separately from outlets and check how the model configures unused outlets.

Flow and operating pressure

Check the valve’s stated flow and pressure requirements against the water supply available at the installation. The K-Rain 4404 lists a 10 GPM minimum and 25–75 PSI; the K-Rain 6404 lists a 15 GPM minimum, and the K-Rain 6605 lists 15 GPM minimum at 25–150 PSI. Several other products provide no numerical flow or pressure range in the supplied details, so avoid assuming their requirements match these models.

A buyer with a supply that meets the 4404’s listed range may favour that four-zone option; systems with at least 15 GPM and a need for greater listed pressure range can consider the Confirm real operating conditions before purchase.

Body material and application

Select material and designation for the conditions and water type in your system. The K-Rain 4000 Series models list ABS bodies, the K-Rain 6000 Series models list metal, and the Fimco 4006 lists stainless steel. K-Rain also identifies the 4402-RCW, 6404-RCW, and 4606-RCW as reclaimed-water models; the 4402-RCW listing notes a purple-top designation for reclaimed-water use.

Buyers using non-potable reclaimed water should focus on a model specifically designated RCW and verify local requirements. For a conventional sprinkler setup, choose among the listed materials based on the connection and flow fit rather than assuming one material suits every site.

The product information does not establish a comparative service life.

Which Index Valve Fits Your Sprinkler System?

For a general four-zone system with a supply that meets 10 GPM and 25–75 PSI, choose the K-Rain 4404 Indexing Valve; it has the clearest combination of zone, flow, and pressure details. If you need five zones and your system meets a 15 GPM minimum, the K-Rain 6605 Indexing Valve offers six outlets and a listed 25–150 PSI range. For four zones with a metal body and 15 GPM minimum, consider the K-Rain 6404 Indexing Valve.

Buyers configuring a pump-driven system for five or six zones can consider the Fimco 4006 Hydro Valve, which includes both cams. For reclaimed-water use, select an RCW-designated model, such as the K-Rain 4402-RCW Valve for two zones.

Match pipe connections and verify actual system flow before ordering.

Frequently Asked Questions

How do I determine whether my pump supplies enough flow to index the valve reliably?

Check the pump’s actual flow under your irrigation system’s operating conditions, then compare it with the valve’s stated minimum. A flow meter or timed-volume measurement can help establish delivered flow. For the K-Rain 4404, the listed minimum is 10 GPM; the 6404 and 6605 list 15 GPM minimums.

Allow for system-specific variation.

How can I confirm that an index valve’s inlet and outlet connections match my existing pipes?

Compare the valve’s specified inlet and outlet sizes and connection types with your pipe fittings before ordering. Product titles may identify a size, but not every connection detail. Check the full product information or measure your existing fittings, and confirm that adapters, if needed, are suitable for the pipe and valve.

What maintenance or winterizing steps help prevent an index valve from sticking or freezing?

Before freezing weather, shut off the water supply and drain the valve and exposed lines according to the system’s instructions; trapped water can freeze. Keep the valve clear of debris, and inspect it periodically for leaks or restricted movement. Follow the manufacturer’s care guidance, since procedures can vary by model and installation.

How many outlets or zones should I choose?

Choose a valve that supports the number of zones your irrigation layout requires, and check whether the product’s outlet count and zone count differ. For example, the listed options include four-outlet valves configured for two, three, or four zones, plus six-outlet models configured for five or six zones.

When should I choose a reclaimed-water model?

Choose a model explicitly designated for reclaimed-water use when that is the water source for your system. The listed reclaimed-water options include models for two, four, and six zones. Confirm the specific model’s connection requirements and other operating details before installation rather than assuming all valves in a series are interchangeable.

Final Words

For a general four-zone system, the K-Rain 4404 is the clearest choice when your supply meets its stated 10 GPM minimum and 25–75 PSI range. Need five zones? Consider the 6605 if your system meets its 15 GPM minimum.

For reclaimed water or higher flow, select a model designated for that application. Before ordering, verify zone count, actual flow, pressure, and pipe connections against your installation.