A strong greenhouse arch hoop bender makes repeatable curves in pipe that matches your frame design, and the Bootstrap Farmer 10′ Wide Greenhouse Arch Hoop Bender suits DIY builders using 1 3/8-inch top rail. This selection ranges from dedicated manual arch tools to heavy electric machines that bend multiple tube shapes and sizes. The key distinction is whether a tool is made for greenhouse hoops at a stated pipe size or is a general-purpose tube bender that may need more careful compatibility checks.
Some listings also state a maximum hoop length, while others focus on die sizes or pipe thickness. Compare those details before choosing: a machine’s weight and versatility do not guarantee that it fits your intended pipe.
The rankings prioritize direct greenhouse-hoop fit, then useful dimensions and included setup details.
The Bootstrap Farmer 10′ Wide Greenhouse Arch Hoop Bender is the best overall choice for a DIY hoop house using 1 3/8-inch top rail. Its listed design bends uniform arches, uses 1/8-inch channel steel with a weather-resistant powder coating, and is made specifically for that top-rail size. Choose the Leriton 12′ Wide Hoop Bender instead if you need a stated 12-foot width and the included mounting hardware and extension pole.
Confirm the pipe diameter and frame width before buying either tool.
Our Top Picks
Best OverallBuilt for 1 3/8-inch top rail and 10-foot-wide arches; its 1/8-inch channel steel and stated uniform-bend design directly suit hoop-house construction.
View on Amazon
Widest Manual ArchSpecifies 12-foot width and bending 1 3/8-inch fence-line posts, with mounting hardware and an extension pole included for setup.
View on Amazon
Longest Pipe CapacityDesigned for greenhouse hoops and DN15 or DN20 pipe up to 12 feet, though buyers must verify those pipe sizes match their frame.
View on Amazon- 38mm Tube Fit RDHFTNIHU Manual Bender
- Greenhouse Electric HayWHNKN Electric Roller Bender
Compare Greenhouse Hoop Benders by Fit and Use
| # | Product | Weight | Buy |
|---|---|---|---|
| 1 | 1. Bootstrap Farmer 10' BenderBest Overall | 8 lb | View on Amazon |
| 2 | 2. Leriton 12' Hoop BenderWidest Manual Arch | 10 lb | View on Amazon |
| 3 | 3. LGEGE Manual Pipe BenderLongest Pipe Capacity | 49.9 lb | View on Amazon |
| 4 | 4. RDHFTNIHU Manual Bender38mm Tube Fit | — | View on Amazon |
| 5 | 5. HayWHNKN Electric Roller BenderGreenhouse Electric | 580 lb | View on Amazon |
| 6 | 6. HayWHNKN 110V Tube BenderFor varied tube-diameter forming | 567 lb | View on Amazon |
| 7 | 7. APGLSXY Manual Pipe BenderFor mixed household pipe work | 2748 g | View on Amazon |
| 8 | 8. WYDDDARY 220V Pipe BenderFor 220V multi-profile forming | 471 lb | View on Amazon |
| 9 | 9. INTSUPERMAI Tube BenderFor continuous electric tube forming | 476 lb | View on Amazon |
| 10 | 10. Vumara Electric Pipe BenderFor heavy-duty electric forming | 800 lb | View on Amazon |
Detailed Reviews: Best Greenhouse Arch Hoop Bender

#1 · Best Overall
1. Bootstrap Farmer 10' Bender
- Weight: 8 lb
Best for: For repeatable farm-scale arches.
Why it ranks #1: Built for 1 3/8-inch top rail and 10-foot-wide arches; its 1/8-inch channel steel and stated uniform-bend design directly suit hoop-house construction.
Bootstrap Farmer specifies a 10-foot-wide arch and machining for exactly 1 3/8-inch top rail, giving high-tunnel builders a clear pipe-and-span target. Its 1/8-inch channel steel construction and weather-resistant powder coating address repeated farm use, while the maker says the tool is fabricated in Texas for continuous torque.
The exact 1 3/8-inch fit on the 10- to 20-foot models helps buyers select the intended top rail rather than risk a mismatched tube. Bootstrap Farmer warns that 1 1/4-inch tubing risks crimping and 1 1/2-inch tubing will not fit, making pipe selection central to setup. The 1/8-inch channel steel and weather-resistant powder coat suit repeated use, while the 8-pound listed weight is relevant when positioning or storing the tool.
- Specified 10-foot-wide arch model
- Machined for exactly 1 3/8-inch top rail
- 1/8-inch channel steel construction
- Weather-resistant powder-coated finish
- It will not fit 1 1/2-inch tubing, and 1 1/4-inch tubing risks crimping.
Skip it if you need to bend DN15 and DN20 sizes rather than 1 3/8-inch top rail; LGEGE lists both pipe types.
Farm and high-tunnel growers using exactly 1 3/8-inch top rail can value the specified 10-foot arch and robust channel steel. Its narrow pipe fit makes it unsuitable for other listed diameters.
Full product details
| Brand | Bootstrap Farmer |
|---|---|
| Item Weight | 8 pounds |
| Manufacturer | Bootstrap Farmer |
| Dimensions | 39.5 x 8 x 4 inches |
Listed on Amazon as: Bootstrap Farmer 10' Wide Greenhouse Arch Hoop Bender for DIY Hoop House Construction, 1 Pack
View on Amazon
#2 · Widest Manual Arch
2. Leriton 12' Hoop Bender
- Weight: 10 lb
Best for: For 12-foot DIY hoop frames.
Why it ranks #2: Specifies 12-foot width and bending 1 3/8-inch fence-line posts, with mounting hardware and an extension pole included for setup.
The Leriton bender targets 1 3/8-inch fence-line posts and a greenhouse arch about 12 feet wide, giving DIY growers a specified pipe size and span for hoop-house work. Its set includes mounting hardware and an extension pole, so the core setup components are supplied alongside the bending tool.
Leriton describes a mechanical structure that reproduces a uniform arch, which can help keep successive hoops consistent across a frame. Compatibility with 1 3/8-inch fence-line posts narrows the pipe choice, while the approximately 12-foot size identifies the intended greenhouse span. Mounting hardware and an extension pole are included, supporting setup without sourcing those listed pieces separately. The 10-pound tool measures 40.94 inches long, a practical consideration for handling and storage.
- Specified for 1 3/8-inch fence-line posts
- About 12-foot greenhouse arch size
- Extension pole and mounting hardware included
- Uniform curvature can be reproduced from operation to operation
- The listed pipe compatibility is limited to 1 3/8-inch fence-line posts.
Skip it if you need a bender explicitly rated for several pipe diameters; LGEGE lists DN15 and DN20 compatibility.
A DIY greenhouse builder seeking roughly 12-foot arches from 1 3/8-inch fence-line posts gets a defined setup and repeatable curvature. Check that the intended pipe diameter and greenhouse span match those specifications.
Full product details
| Brand | Leriton |
|---|---|
| Color | green |
| Cover Material | Plastic |
| Dimensions | 40.94"L x 5.12"W x 4.72"H |
| Item Weight | 10 pounds |
| Manufacturer | Leriton |
| Part Number | XEI-Leriton-1142 |
| Model Number | XEI-Leriton-1142 |
| Size | About 12 Ft |
| Additional Information | Important information Safety Information Always wear appropriate safety gear when handling and bending metal posts. Be cautious of sharp edges and heavy components during assembly and use. Ensure the greenhouse is properly anchored and ventilated to prevent damage or injury. |
Listed on Amazon as: 12' Wide Hoop Bender for 1 3/8" Top Rail Pipe for Greenhouse Arch
View on Amazon
#3 · Longest Pipe Capacity
3. LGEGE Manual Pipe Bender
- Weight: 49.9 lb
Best for: For manual DN15/DN20 bending.
Why it ranks #3: Designed for greenhouse hoops and DN15 or DN20 pipe up to 12 feet, though buyers must verify those pipe sizes match their frame.
The LGEGE manual bender accepts DN15 and DN20 pipes up to 12 feet long, a useful combination for greenhouse builders shaping longer tubing by hand. Its steel frame, reinforced components, red grip handles, and roller system support controlled manual bending without relying on an electric drive.
DN15 and DN20 compatibility gives the buyer two stated pipe categories, and the up-to-12-foot length covers long greenhouse hoop stock. The roller system and comfortable red grip handles are intended to make bending controlled with less effort, while the stable mounting platform supports the work area. At 49.9 pounds and with package dimensions of 38.4 by 9.25 by 8.07 inches, it calls for a substantial setup and storage space.
- Handles DN15 and DN20 pipes
- Supports pipe lengths up to 12 feet
- Steel frame with reinforced components
- Roller system and grip handles for controlled manual bending
- The 49.9-pound listed weight makes moving and repositioning the manual tool a substantial task.
Skip it if you want an electric machine with multiple round and square dies; HayWHNKN's 110V model includes 17 dies.
Greenhouse builders who want a manual tool for DN15 or DN20 pipe up to 12 feet can consider this steel-frame option. Allow for its 49.9-pound weight and a stable mounting area.
Full product details
| Brand | LGEGE |
|---|---|
| Included Components | Heavy Duty Metal Tube Bending Machine, Manual Greenhouse Pipe Bender |
| Item Weight | 49.9 pounds |
| Item model number | L-2445 |
| Manufacturer | LGEGE |
| Package Dimensions | 38.4 x 9.25 x 8.07 inches |
Listed on Amazon as: Manual Greenhouse Pipe Bender Bender Tool, Heavy Duty Metal Tube Bending Machine for DN15 DN20 Pipes, Greenhouse Hoop Tubing Bend Easily, up to 12FT
View on AmazonWhy it ranks #4: Its listing specifically identifies greenhouse bending and a 38mm tube size, offering a useful stated compatibility point for a manual tool.
RDHFTNIHU identifies a 38 mm tube bending size, giving buyers a concrete diameter reference for manual greenhouse and general pipe work. Its listing also names conduit, aluminum tubes, and thin iron, offering material flexibility across home, plumbing, and electrical tasks without specifying a powered drive.
The stated 38 mm tube size helps establish a fit target, while the manual format avoids the electric drive requirements of powered tube machines. Its described compatibility with conduit, aluminum, and thin iron broadens the kinds of projects it can address. However, the listing provides no tube-length range, wall-thickness limit, or detailed die information, so buyers need to judge whether the specified size suits their particular hoop stock and forming workflow.
- Lists a 38 mm tube bending size
- Manual pipe-bending format
- Described for electrical conduit
- Also lists aluminum tubes and thin iron
- The supplied listing gives no tube-length or wall-thickness range.
Skip it if you need a specified arch span and exact 1 3/8-inch top-rail fit; Bootstrap Farmer lists both details.
A buyer seeking manual bending around the listed 38 mm tube size may appreciate the stated material variety. Greenhouse projects requiring a known span or wall-thickness capacity need more detailed specifications than provided.
Full product details
| Brand | RDHFTNIHU |
|---|---|
| Included Components | as described |
| Item model number | RDHFTNIHU |
| Manufacturer | RDHFTNIHU |
| Size | Bend 38mm tube |
Listed on Amazon as: Manual Pipe Bender/Tube Bending Machine Greenhouse Bending Tool
View on Amazon
#5 · Greenhouse Electric
5. HayWHNKN Electric Roller Bender
- Weight: 580 lb
Best for: For powered greenhouse tube forming.
Why it ranks #5: The listing names vegetable-greenhouse construction and thin-wall pipe bending from 0.5 to 2mm, with round and square dies.
HayWHNKN pairs a turbo reducer with a back-and-forth rolling action, enabling powered bending to a chosen curve for greenhouse construction and decoration. Its 17-piece die set covers round and square tubing, while the listing specifies thin-wall material up to 2 mm and adjustable curve control.
Nine round and eight square dies provide options across tube profiles, and the listed 0.5–2 mm wall thickness frames the material range for greenhouse and construction work. The turbo reducer drives the rolling action, while screw-height adjustment changes the descending position to help shape the curve. The chain and shell are described as widened and thickened, and the gear as quenched; at 580 pounds, its placement is a significant workshop consideration.
- Includes nine round and eight square dies
- Listed for 0.5–2 mm wall thickness
- Turbo reducer drives back-and-forth rolling
- Screw-height adjustment supports curve shaping
- The 580-pound listed weight makes relocation a substantial undertaking.
Skip it if you need a 110V machine with listed stainless and mild-steel thickness limits; HayWHNKN's 1.5 kW model specifies them.
A greenhouse builder shaping thin-wall round, square, or rectangular metal tubing can use the powered rolling approach and adjustable curve control. The 580-pound weight and 2 mm wall limit define important setup boundaries.
Full product details
| Brand | HayWHNKN |
|---|---|
| Color | Blue |
| Item Weight | 580 pounds |
| Item model number | JHSFY-190820 |
| Manufacturer | HayWHNKN |
| Package Dimensions | 40.55 x 28.74 x 25.2 inches |
Listed on Amazon as: Electric Pipe Tube Bender Machine Tube Roller Bender with 9 Round(5/8-3inch) and 8 Square(5/8-2inch) Die Set Metal Steel Tube Bending Machine 0.5-2mm
View on AmazonWhy it ranks #6: Its 17-piece die set covers round tubes from 16mm to 76mm and square tubes from 16mm to 50mm, but it is not a dedicated arch tool.
HayWHNKN supplies 17 dies—nine round and eight square—giving metal formers a broad set of stated tube sizes for greenhouse and other projects. The 110V, 1.5 kW electric machine supports thin-wall stainless and mild steel within listed thickness ranges, making material limits part of the selection.
Round dies cover 16 to 76 mm and square dies 16 to 50 mm, so one machine can address multiple tube profiles without relying on a single hoop size. The listed material capacities are 0.5–2.0 mm stainless steel and 0.8–2.3 mm mild steel, with separate maximum square-tube thicknesses. Its 110V supply and 567-pound weight affect electrical planning and placement; the die range suits varied forming but does not itself specify an arch span.
- Includes nine round and eight square dies
- Round die range is 16–76 mm
- Square die range is 16–50 mm
- Lists thickness limits for stainless and mild steel
- At 567 pounds, it requires a planned location rather than frequent repositioning.
Skip it if you need a compact manual tool for DN15 and DN20 pipe; LGEGE lists a manual bender for those sizes.
A shop or greenhouse builder forming several thin-wall tube sizes can benefit from the extensive round and square die set. Plan for its 567-pound weight, 110V supply, and material-thickness limits.
Full product details
| Brand | HayWHNKN |
|---|---|
| Color | Green |
| Included Components | Pipe bending machine *1, Round dies*9, Square Die*8 |
| Item Weight | 567 pounds |
| Item model number | SFS053326 |
| Manufacturer | HayWHNKN |
| Material | Metal |
| Dimensions | 29 x 24 x 40 inches |
| Voltage | 110 volts_of_alternating_current |
| Wattage | 1.5 KW |
| Additional Information | Important Information Wattage 1 KW Bulb Voltage 110 volts_of_alternating_current |
Listed on Amazon as: Electric Pipe Tube Bender 110V 1.5KW
View on AmazonWhy it ranks #7: The manual set bends conduit, aluminum tube, and thin iron, but its listing gives no greenhouse hoop width or specific pipe-size range.
The APGLSXY manual bender is listed for electrical conduit, aluminum tubes, and thin iron, making its stated appeal broader than greenhouse hoops alone. That material variety can suit buyers whose bending work spans home improvement, electrical, and plumbing tasks, though the supplied listing gives no pipe diameter or arch-span range.
Its manual operation and listed compatibility with conduit, aluminum, and thin iron allow use across several kinds of pipe work without specifying an electric supply. The description identifies electrical work, plumbing, and home improvement as intended applications, so greenhouse buyers should weigh that versatility against the missing diameter and length specifications. The unit weighs 2,748 grams, and no components are listed as included, which leaves the supplied setup details limited.
- Listed for electrical conduit
- Can bend aluminum tubes
- Thin iron is among the stated materials
- Applications include electrical, plumbing, and home improvement work
- No pipe diameter or greenhouse arch-span range is supplied.
Skip it if you require a stated 38 mm tube capacity; RDHFTNIHU lists a 38 mm bending size.
A home-improvement user needing a manual tool for conduit, aluminum, or thin iron may find the listed material range relevant. Greenhouse builders needing a defined hoop size should note the missing diameter and span.
Full product details
| Brand | APGLSXY |
|---|---|
| Color | Multicolor |
| Head Style | Open End |
| Included Components | No |
| Item Weight | 2748 g |
| Manufacturer | APGLSXY |
| Model Number | Other |
Listed on Amazon as: Greenhouse Manual Multifunction Pipe Bender Iron Pipe Steel Pipe
View on AmazonWhy it ranks #8: Offers round and square dies for thin-walled steel up to 2mm, but its 220V, 471-pound machine is a general tube bender rather than a hoop-specific tool.
WYDDDARY provides named round and square die sizes and a 220V, 3HP pure-copper-core motor, helping buyers match thin-walled steel stock to a powered bending setup. The listing specifies pipes up to 2 mm thick and includes a forward/reverse switch for operating the electric machine.
Eight round die sizes from 0.74 to 2.99 inches and six square sizes from 0.78 to 2.36 inches make the available profiles easier to compare with planned tubing. The 220V motor and forward/reverse switch support powered operation, while the stated 2 mm maximum wall thickness sets a clear material boundary. At 471 pounds, the machine calls for a planned installation spot; the listing does not specify a greenhouse arch span.
- Eight specified round die sizes
- Six specified square die sizes
- 220V, 3HP pure-copper-core motor
- Forward/reverse switch and 2 mm wall limit stated
- The machine is listed at 471 pounds, limiting convenient relocation.
Skip it if you require stated continuous cold-bending performance and nonferrous compatibility; INTSUPERMAI lists both capabilities.
A fabricator with 220V power and thin-walled steel in the listed die sizes can use this machine for round or square forming. Its 471-pound weight and unspecified arch span deserve consideration.
Full product details
| Brand | WYDDDARY |
|---|---|
| Item Weight | 471 pounds |
| Manufacturer | WYDDDARY |
| Package Dimensions | 43.31 x 30.31 x 25.2 inches |
| Size | For 2mm round/square pipe |
Listed on Amazon as: 220V 3HP Multi-Function Electric Pipe Bender, Cold Bending Round Square Rectangular Tube Bending Machine with Premium Steel Dies for Construction & Decoration
View on AmazonWhy it ranks #9: Its 2.2kW, 220V machine includes round and square steel dies, but the supplied details do not state hoop dimensions or greenhouse-specific capacity.
INTSUPERMAI specifies a 2.2 kW, 220V single-phase motor with support for long-hour continuous cold bending, making extended electric forming its central use case. Its set includes 15 round and nine square steel dies, and the machine is listed for round, square, and rectangular thin-wall tubing.
The 220V single-phase supply and 2.2 kW motor establish the electrical requirements, while the stated continuous cold-bending capability suits longer forming runs. Fifteen round carbon-steel molds and nine square 45# steel molds support multiple profiles; customizable dies are also mentioned. Compatibility includes thin-wall stainless and nonferrous tubing, but no specific diameter or wall-thickness range is supplied, so confirm the intended tube size against the selected configuration before planning greenhouse arches.
- 2.2 kW, 220V single-phase motor
- Lists long-hour continuous cold bending
- Includes 15 round and nine square dies
- Supports round, square, and rectangular thin-wall tubing
- The supplied facts do not state tube diameter or wall-thickness limits.
Skip it if you need named round and square die dimensions and a 2 mm limit; WYDDDARY lists both.
A workshop shaping thin-wall stainless or nonferrous tube over longer electric runs may value the motor and broad profile support. Plan for 220V power and resolve tube dimensions before committing to greenhouse hoops.
Full product details
| Brand | INTSUPERMAI |
|---|---|
| Included Components | Pipe bender *1 |
| Item Weight | 476 pounds |
| Item model number | S053490 |
| Manufacturer | INTSUPERMAI |
| Dimensions | 21.6 x 25.6 x 35.4 inches |
Listed on Amazon as: INTSUPERMAI Tube Pipe Bender Square Round Rectangular Frame Bending Machine
View on AmazonWhy it ranks #10: This 800-pound, customizable industrial machine lacks stated greenhouse hoop dimensions or a confirmed pipe-size match, making it the least direct fit.
Vumara lists an 800-pound electric pipe-bending machine with a 3 kW specification, positioning it for heavy-duty forming rather than a portable greenhouse hand tool. The product title also identifies round and square tube bending and one-time forming, although the supplied listing does not specify pipe diameters or greenhouse arch dimensions.
The electric drive and 3 kW figure distinguish this machine from manual hoop benders, while the title calls out round and square tube work. Its 800-pound listed weight and 70-by-40-by-30-inch package dimensions mean installation and floor space need consideration before choosing it. Vumara notes multiple models and customization, but the available facts do not identify a particular tube range, so buyers must base fit decisions on confirmed model specifications.
- Electric pipe-bending machine with listed 3 kW power
- Title specifies round and square tube bending
- One-time forming is identified in the title
- Multiple models and customization are stated
- The supplied specifications do not identify tube diameters or greenhouse arch dimensions.
Skip it if you need stated greenhouse pipe sizes and arch spans; Bootstrap Farmer specifies 1 3/8-inch top rail and a 10-foot model.
A buyer handling heavy-duty round or square tube forming may value the electric machine format and customization options. Its 800-pound weight and unspecified tube range make space and exact fit central considerations.
Full product details
| Brand | Vumara |
|---|---|
| Included Components | other |
| Item Weight | 800 pounds |
| Item model number | X-wanquji |
| Manufacturer | Vumara |
| Package Dimensions | 70 x 40 x 30 inches |
Listed on Amazon as: 76 Heavy-Duty Pipe Electric 3Kw Round Square Tube Greenhouse Bracket One-Time Forming Bending Machine
View on AmazonAvoid the pipe-size and crimping trap
A pipe bender can be the wrong tool even when its listing mentions greenhouse construction, so verify the pipe diameter before ordering. Bootstrap Farmer states that its 10- to 20-foot models bend exactly 1 3/8-inch top rail; it warns that 1 1/4-inch tubing risks crimping and 1 1/2-inch tubing will not fit. Leriton also names 1 3/8-inch posts, while LGEGE instead lists DN15 and DN20 pipes and RDHFTNIHU identifies a 38mm tube.
Those are not interchangeable claims, and the listings do not establish that every named size works with every frame. A mismatch can produce a poor bend or leave the pipe unusable with the tool.
Check the pipe’s actual outside diameter and the bender’s specified fit, then confirm that your intended hoop width is supported. Do not infer compatibility from a general description alone.
Manual arch tools versus powered tube machines
Dedicated manual arch benders trade broad material flexibility for a more direct hoop-building fit, while powered machines offer die options but demand a more involved setup. Bootstrap Farmer and Leriton state arch widths and a 1 3/8-inch pipe application, which helps buyers connect the tool to a hoop-house plan. In contrast, HayWHNKN’s electric models list multiple round and square dies and thin-wall metal ranges, but the listings do not specify a ready-made arch width.
Their listed weights—567 and 580 pounds—also make them a very different category from the 8-pound Bootstrap Farmer and 10-pound Leriton tools. A powered bender may make sense for repeated work across several tube profiles, provided the pipe, dies, power, and workspace align.
For a single greenhouse frame, prioritize stated hoop dimensions and pipe fit over die count alone.
How to Choose a Greenhouse Hoop Bender
Pipe diameter and compatibility
Look first for a bender that explicitly matches your pipe diameter, because a similar-looking size may not fit or may crimp. Bootstrap Farmer specifies 1 3/8-inch top rail for its 10- to 20-foot tools and warns that 1 1/4-inch pipe risks crimping while 1 1/2-inch pipe will not fit. Leriton also describes bending 1 3/8-inch fence-line posts.
LGEGE lists DN15 and DN20, and RDHFTNIHU specifies 38mm tube; these are distinct listing details, not proof of universal compatibility. If your greenhouse plan already names 1 3/8-inch top rail, the first two tools offer the clearest match.
If you use another pipe, favor a listing that identifies that exact size and confirm fit before purchase.
Hoop width and pipe length
Choose a bender whose stated arch width or pipe capacity meets your planned greenhouse dimensions. Bootstrap Farmer is a 10-foot-wide model, while Leriton lists about 12 feet; LGEGE says it can bend pipes up to 12 feet long, which is a pipe-length claim rather than a stated arch width. These measurements should not be treated as interchangeable.
A 10-foot frame builder who uses the specified 1 3/8-inch top rail has a clearly stated option in Bootstrap Farmer; a buyer targeting a wider arch can consider Leriton, but should verify the setup against the planned frame. LGEGE may suit a project needing long pipe capacity if DN15 or DN20 is appropriate.
Match the bender’s stated dimension to the frame design, not just the longest number in a listing.
Manual or electric operation
Decide whether a dedicated manual tool or a powered multi-die machine better fits your workload and workspace. The manual arch options weigh 8 pounds for Bootstrap Farmer and 10 pounds for Leriton; LGEGE’s manual machine is listed at 49.9 pounds. Electric alternatives are substantially heavier in the supplied data: HayWHNKN lists 567 and 580 pounds, while WYDDDARY lists 471 pounds and 220V operation.
The electric models offer multiple dies and broader tube-forming details, but their listings do not give the same specific arch-width match as the dedicated manual tools. For a small DIY hoop-house project, prioritize the lighter tools with a stated pipe fit.
For repeated work across different tube shapes, consider an electric option only after checking its die compatibility, power requirements, and space needs.
Which Greenhouse Hoop Bender Should You Choose?
For most DIY hoop-house builders using 1 3/8-inch top rail, choose Bootstrap Farmer 10′ Bender: it is specified for that pipe and a 10-foot-wide arch. If your design calls for a wider stated arch, consider Leriton 12′ Hoop Bender, which also lists 1 3/8-inch posts and includes mounting hardware and an extension pole. Choose LGEGE Manual Pipe Bender when DN15 or DN20 pipe and up to 12-foot pipe length match your plan.
RDHFTNIHU Manual Bender is another manual option if its 38mm tube specification fits. For repeated bending across multiple tube shapes, HayWHNKN Electric Roller Bender lists greenhouse use and a 0.5–2mm wall range, but confirm pipe and die fit.
The heavier general-purpose electric machines rank lower because their hoop dimensions are not stated.
Frequently Asked Questions
How do I prevent greenhouse pipe from crimping while bending?
Prevent crimping by using a bender that fits the pipe, supporting the tube as you work, and bending gradually rather than forcing a tight curve in one pass. Check the pipe and tool specifications before starting; a mismatch can make smooth, uniform arches harder to achieve.
How should I match hoop width and pipe diameter to my greenhouse frame?
Match the bender’s stated arch width and pipe specification to your frame plan before buying. Bootstrap Farmer is specified for 1 3/8-inch top rail and a 10-foot-wide arch; Leriton lists a 12-foot width and 1 3/8-inch posts. Confirm both dimensions for your design.
Do electric tube benders need special dies or power connections for greenhouse hoops?
They may: check the machine’s die compatibility, tube range, and power requirements against your pipe and work area. One listed electric model has a 110V title, another lists 220V, and the HayWHNKN roller lists round and square dies. Confirm the exact fit before choosing.
Which manual bender suits nonstandard pipe sizes?
Compare the pipe specification in the product title with your tubing. The LGEGE manual bender lists DN15 and DN20 pipes and up to 12-foot pipe length, while the RDHFTNIHU manual bender lists a 38mm tube specification. Verify that your pipe matches before purchasing.
When is an electric roller bender worth considering for greenhouse work?
Consider an electric roller when you expect repeated bending across different tube shapes, provided its dies and wall range fit your materials. The HayWHNKN model lists greenhouse use, round and square dies, and a 0.5–2mm wall range. Confirm compatibility; other heavier electric options do not state hoop dimensions.
Final Words
For a DIY hoop house using 1 3/8-inch top rail, the Bootstrap Farmer 10-foot bender is the clearest match: its stated pipe size and arch width align with that plan. Choose the Leriton if you need a stated 12-foot arch and its included mounting hardware and extension pole. For other tools, verify pipe diameter, frame width, die fit, and power requirements before buying.





