Best Traps For Spotted Lanternfly: Mesh and Tape Compared

#1 · Best Overall

1. Lanternfly Motel Mesh House Trap

• Dimensions: 9"L x 16"W x 36"H
• Dimensions: 9"L x 16"W x 36"H

Best for: Bait-free mesh funnel trapping.

Why it ranks #1: Its mesh funnel targets nymph, mid-size, and adult lanternflies climbing trees, with no bait, pesticides, or messy liquids and gels.

A mesh apron funnels lanternflies crawling upward into a cone and then a mesh house, giving tree owners a bait-free way to intercept nymphs, mid-size insects, and adults. This two-trap set uses mesh and metal rather than pesticides, liquids, or gels, and is described as safe for children and non-target animals.

The trap takes advantage of lanternflies’ upward movement: its apron directs climbing insects into the mesh cone, which leads to the holding house at the top. That funnel route supports capture across the listed nymph, mid-size, and adult phases without bait or pesticide application. The lightweight, 9-by-16-by-36-inch form is intended for tree placement. When the mesh house fills, the supplied description says to untie its string, providing a way to empty it rather than discard the whole trap.

Skip it if you prefer sticky paper that can be cut to tree size; W4W’s 4 Rolls offer 30-foot lengths of cuttable tape.

This suits buyers seeking a reusable-feeling, bait-free mesh approach for climbing lanternflies and a trap described as safe around people and wildlife. Plan to check the mesh house and empty it when full.

Listed on Amazon as: (Green, 2 Pack) Spotted Lanternfly Mesh House Trap SLF. Simple and Effective Way to Catch Lantern Flies and Nymphs

#2 · Wildlife-Conscious Design

2. LanternFly Trap Co Tree Trap

Best for: Wildlife-conscious trunk interception.

Why it ranks #2: The mesh-and-funnel design targets climbing lanternflies without bait or pesticides, and the listing recommends trunks at least 15 inches around.

A mesh-and-funnel design intercepts spotted lanternflies as they climb toward the tree canopy, offering a bait-free, pesticide-free option for trunk protection. The trap relies on the insects’ upward movement and is described as helping minimize unintended capture of birds and beneficial wildlife.

Because the trap targets lanternflies moving up the trunk, it works without chemical bait or sprays, simplifying placement for buyers avoiding those inputs. Its mesh-and-funnel construction is intended to capture the target while helping limit unintended wildlife capture. Trunk size matters: the recommendation is for trunks at least 15 inches around. On smaller trees, tuck excess mesh underneath; on larger ones, a complete wrap is not required. Those placement notes help buyers judge whether the design suits their tree.

Skip it if your trees have trunks under 15 inches around and you want tape cut to size; W4W’s 4 Rolls are described as cuttable.

Choose this if wildlife-conscious, bait-free interception suits your trees and the trunk circumference meets the stated recommendation. The placement guidance allows excess mesh on smaller trees, but the listing recommends trunks at least 15 inches around.

Listed on Amazon as: Spotted Lanternfly Tree Trap, Non-Toxic Wildlife-Safe Design, Made in USA

#3 · Best Multipack

3. Qualirey Four-Pack Mesh Trap

• Dimensions: 11.02"L x 10.63"W x 0.98"H
• Dimensions: 11.02"L x 10.63"W x 0.98"H

Best for: Reusable lanternfly tree coverage.

Why it ranks #3: Four reusable polyester-and-iron traps include 2.5-meter ropes and nails, making this a useful ready-to-hang set for multiple trees.

Four reusable polyester-and-iron lantern traps give tree owners multiple stations for catching spotted lanternfly larvae and adults. Each 9.8-by-16-by-36-inch trap hangs from the included hemp rope, while a nail secures its lower edge near the trunk, creating a physical interception setup without relying on sticky tape.

The four-trap set includes four 2.5-meter ropes and eight nails, so you can hang and secure several stations using the supplied hardware. Its polyester-and-iron construction is described as reusable and suitable for varied weather, reducing the need to replace the whole trap after one use. For larger trees, the supplied guidance calls for wrapping jute rope around the trunk and hanging the trap from it. The package notes that an opened top can be tied again.

Skip it if you want a mesh cone-and-house funnel; Lanternfly Motel’s 2 Pack uses that described upward-crawling route and has a fill-and-empty process.

Choose this set if you want reusable lantern traps and supplied rope and nails for securing them near trunks. It suits multiple placements, but larger trees call for wrapping jute rope around the trunk.

Listed on Amazon as: Qualirey 4 Pack Spotted Lanternfly Trap Lanternfly Killer for Tree,Green

#4

4. ModFurne Mesh Lantern Trap

Best for: Two reusable lantern tree traps.

Why it ranks #4: This two-pack uses reusable polyester-and-iron mesh traps with rope and nails, and is described as catching spotted lanternfly larvae and adults.

Two reusable polyester-and-iron lantern traps come with twine and nails, giving tree owners the basic hardware to hang each enclosure and secure its lower edge. The mesh lantern design targets spotted lanternfly larvae and adults without bait, and is described as safe for birds, squirrels, and other animals.

The traps use lanternflies’ instinct to climb upward, guiding the target into a mesh enclosure rather than relying on a sticky band. Polyester-and-iron materials are described as reusable and suitable for varied weather, so the units can remain in use across changing conditions. Included twine supports hanging, while nails secure the lower edge near the trunk. The stated 9.8-by-16-by-36-inch size provides a substantial enclosure; check that the tree placement works with this full-size form.

Skip it if you want a four-trap set with four 2.5-meter ropes; Qualirey’s 4 Pack includes that additional hanging hardware.

Choose this set if you want two reusable mesh lantern traps with twine and nails for tree installation. It suits buyers avoiding bait, but plan for the stated full-size enclosure and lower-edge securing step.

Listed on Amazon as: Spotted Lanternfly Traps Lantern with Rope and Nails 2 Pack

#5 · Longest Roll Coverage

5. W4W Tree Tape

• Dimensions: 360"L x 5"W x 2"H
• Dimensions: 360"L x 5"W x 2"H

Best for: Cut-to-length weather-resistant tape.

Why it ranks #5: Four water-resistant rolls provide 30 feet each and can be cut to fit different tree sizes, offering substantial adhesive coverage.

Four 30-foot rolls let you cut W4W tree tape to suit different trunk sizes, giving homeowners flexibility across trees on a property. The weather-resistant adhesive paper is described as holding through most storms, while its sticky barrier targets spotted lanternflies at all stages and other insects.

Each roll supplies 30 feet of tape, so you can allocate lengths to individual trees rather than rely on one fixed-size band. The cut-to-fit format supports varied trunk sizes, and the water-resistant adhesive is described as weathering most storms without losing glue or efficiency. Its non-toxic, odor-free sticky-paper approach offers a physical alternative to sprays or zappers. The paper is disposable and easy to tear, so used sections can be removed rather than maintained as reusable traps.

Skip it if you want a reusable mesh trap instead of disposable adhesive paper; Qualirey’s 4 Pack uses reusable polyester-and-iron lantern traps.

This fits property owners applying sticky barriers to several trees with differing trunk sizes and who want tape described as weather-resistant. Choose another approach if reusability matters more than cut-to-fit disposable paper.

Listed on Amazon as: W4W, Spotted Lantern Fly Tree Trap – 4 Rolls (30 Feet Each Roll) – Lanternfly Tree Tape Creates a Sticky Barrier Protecting Trees from Harmful Insects – Non-Toxic

#6

6. Catchmaster Tree Shield

• Dimensions: 1"L x 1"W x 1"H
• Dimensions: 1"L x 1"W x 1"H

Best for: Long-roll plant barrier coverage.

Why it ranks #6: Four 30-foot rolls of adhesive barrier are designed for trees, shrubs, and ornamental plants, with roll lengths that can be cut to fit.

Four 30-foot rolls of Catchmaster Tree Shield give gardeners extended adhesive barrier material for trees, shrubs, and ornamental plants. The tape can be cut to adapt to different plant sizes, while its stated target list includes spotted lanternflies and other destructive insects that threaten garden growth.

Each 30-foot roll can be cut to fit a particular tree or plant, helping you distribute the material around varied sizes instead of using a fixed band. The product is described as a heavy-duty crawling and flying insect trap, with spotted lanternflies among its listed targets. That broader use can make the same adhesive barrier relevant to trees, shrubs, and ornamental plants. Four rolls provide material for multiple placements, though the listing does not give a specific replacement interval.

Skip it if you want a scented two-roll product with 20-foot lengths; PIC’s SLF traps list a wintergreen scent and two rolls.

This is a fit for gardeners needing long, cuttable adhesive barriers across trees, shrubs, or ornamental plants. Its broad crawling- and flying-insect role suits mixed pest concerns, not buyers seeking lanternfly-only capture.

Listed on Amazon as: Catchmaster Tree Shield Lantern Fly & Ant Traps Insect Barrier, 4 Rolls 30ft Each, Outdoor Adhesive Crawling Insect Trap to Protect Trees, Fruit & Plants, Pest Control Lawn & Garden

#7

7. BugBane Sticky Tree Tape

• Dimensions: 1.96"L x 1.96"W x 3.6"H
• Dimensions: 1.96"L x 1.96"W x 3.6"H

Best for: Sticky tape for multiple trees.

Why it ranks #7: Three sticky-paper rolls, 20 pins, and an egg scraper provide useful setup accessories, and the tape can catch lanternflies and other crawling insects.

Three sticky-paper rolls are supplied with 20 pins, giving gardeners tape to wrap around tree trunks and hardware to help apply it to larger trees. The product states that its rolls can protect up to 60 trees and catch lanternflies along with other insects that crawl up or down plants.

The tape’s broad crawling-insect capture includes lanternflies, ants, caterpillars, maggots, and beetles, so one trunk barrier can address more than the named target. Twenty included pins help with application on larger trees, while the listing describes setup and removal as easy and provides instructions. Replacement has a clear trigger: change the tape when more than half its surface is covered with bugs. That monitoring rule helps keep the sticky barrier from becoming crowded.

Skip it if you need weather-resistant tape in 30-foot rolls; W4W’s 4 Rolls are described as water resistant and cuttable.

Pick this kit if you want sticky trunk barriers across many trees and value included pins for larger trunks. Its broad catch range is useful for mixed crawling pests, but it is not selective to lanternflies.

Listed on Amazon as: Spotted Lantern Fly Trap for Trees. 3 Sticky Fly Paper Rolls with Pins and Egg Scraper. Bug Tree Tape Wrap Ant Barrier Spotted Lanternfly Killer. Lantern Flies Tape for Trees Glue Insect Barrier

#8

8. PIC Lanternfly Trap Rolls

• Dimensions: 2.75"L x 2.75"W x 10.5"H
• Dimensions: 2.75"L x 2.75"W x 10.5"H

Best for: Wintergreen-scented two-roll barrier.

Why it ranks #8: The two adhesive paper rolls are 20 feet each and are described as catching nymph and adult spotted lanternflies as they climb trunks.

Two wintergreen-scented 20-foot adhesive-paper rolls give tree owners 40 feet of barrier material for intercepting spotted lanternflies as they climb. PIC lists nymphs and adults among its targets and also describes the traps as catching crawling and flying insects, extending use beyond one pest.

The adhesive paper is intended for application around tree trunks, where its listed target includes lanternflies moving upward as nymphs and adults. Each roll is 20 feet long, giving the two-pack 40 feet of material to divide among placements. The wintergreen scent distinguishes this tape from unscented options, while the broad crawling- and flying-insect claim may suit gardens with more than one pest concern. The listing identifies paper and adhesive construction, so this is a sticky barrier rather than a mesh enclosure.

Skip it if you prefer unscented, water-resistant sticky tape; W4W’s 4 Rolls are described as odor-free and weather resistant.

Consider this if you want scented adhesive barriers for lanternflies and other crawling or flying insects, with 20-foot rolls for placement. The wintergreen scent is a key fit consideration for home and garden use.

Listed on Amazon as: PIC Spotted Lantern Fly Trap, 2 Rolls 20ft Each, Outdoor Adhesive Crawling and Flying Insect Trap, Protect Trees, Pest Control, 2 Pack

#9

9. Mysora Lanternfly Sticky Strips

• Dimensions: 12.2"L x 10.83"W x 2.56"H
• Dimensions: 12.2"L x 10.83"W x 2.56"H

Best for: High-volume sticky strip supply.

Why it ranks #9: Twelve rolls, each 30 feet long and about five inches wide, offer extensive adhesive coverage for buyers with many trees or frequent replacements.

Twelve single-sided rolls, each about 30 feet long and five inches wide, provide Mysora’s largest listed supply for covering multiple garden trunks. The sticky strips are intended to catch lanternflies and other small crawling pests, making the set relevant to gardeners managing several trees or replacement needs.

The 12 rolls offer substantial material for broad placement across a garden, while each five-inch-wide strip provides a wide sticky surface on a trunk. At about 30 feet per roll, the tape can be divided among plants and replaced as needed, according to the product’s stated daily and replacement needs. Its single-sided adhesive construction makes the direction of placement important: the sticky surface must face the insects’ path. The listing also names other small crawling animals, so capture is not limited to lanternflies.

Skip it if you need brush-on coverage for irregular trunk surfaces; Qualirey’s Sticky Coating comes with a brush for applying a barrier.

This suits gardeners covering many trunks or keeping replacement rolls available, especially where a wide sticky strip is useful. Account for its single-sided adhesive when placing the tape, and expect capture of other crawling pests too.

Listed on Amazon as: 12 Rolls Spotted Lantern Fly Tree Trap 30 Feet Each Roll Lanternfly Tree Outdoor Fruit Fly Sticky Strips Paper Insect Sticky Barrier Trunk Wraps to Protect Plant, Lawn, Garden(Yellow and Red)

#10

10. Qualirey Sticky Barrier Coating

Best for: Brush-on barrier for irregular surfaces.

Why it ranks #10: This 8-ounce brush-on coating captures spotted lanternflies among other pests, but it is a general sticky barrier rather than a dedicated tree trap.

An included brush lets you apply the eight-ounce sticky coating directly to a tree trunk or another surface, creating a barrier without wrapping a roll of tape. Qualirey lists spotted lanternflies among a broad range of crawling pests the coating can capture, alongside a waterproof, heat-resistant formula.

Applying the coating with the included brush lets you form a sticky barrier on a trunk or other surface, rather than measuring and wrapping adhesive paper. The listed target range includes spotted lanternflies, ants, caterpillars, moths, and several other pests, which may suit mixed garden concerns. Its strong adhesion is described as waterproof and heat resistant, supporting use in varied outdoor conditions. The package contains eight ounces, so the buyer applies a finite quantity rather than installing a fixed-length roll.

Skip it if you need a known length of cuttable sticky tape; W4W’s 4 Rolls list 30 feet per roll and can be cut to fit.

This fits gardeners who prefer brushing a sticky barrier onto trunks or other surfaces instead of wrapping tape. Its broad pest list suits mixed concerns, but the listing gives no coverage area for the eight-ounce quantity.

Listed on Amazon as: 1 Pack Sticky Coating Insect Trap with Brush, Insect Barrier (8 oz)