Best Plastic Stakes For Solar Lights for Common Pole Sizes

Best Plastic Stakes For Solar Lights

A strong plastic stake for solar lights gives your existing fixture a compatible, weather-resistant ground anchor, and suits homeowners replacing broken or missing spikes. These 10 options vary in pole fit, length, pack size and construction, so checking measurements matters more than choosing by appearance. Several are ABS replacement spikes for a specific pole inner diameter, including 0.49-inch, 0.6-inch and 0.83-inch fits.

Others use different mounting styles, such as a plate for a four-hole light base or a short stake with an extension pipe. The leading option is a reinforced ABS set measuring about 8.2 inches long and specified for a 0.83-inch inner diameter.

Before ordering, compare your light’s connection with the listed size and check whether the package quantity suits the number of fixtures you need to repair.

RyanDesign ABS Spikes leads this roundup for buyers whose solar-light poles have a 0.83-inch inner diameter. Its reinforced ABS plastic construction is described as weather-resistant, and the listed stake length is 8.2 inches, a useful full-length replacement format. The six-pack suits several repairs while keeping the fit requirement explicit.

Confirm your pole’s inside diameter before buying: these stakes are specified for 0.83-inch connections, not as a universal fit for every solar light.

Our Top Picks

RyanDesign ABS SpikesBest Overall

RyanDesign ABS Spikes

Its reinforced, weather-resistant ABS stakes measure 8.2 inches long and fit a clearly specified 0.83-inch inner diameter; six are included.

View on Amazon
Aliotech 0.83-Inch Spikes0.83-Inch Six-Pack

Aliotech 0.83-Inch Spikes

This six-pack specifies high-strength ABS, an 8.25-inch length and a 0.83-inch diameter for solar pathway, garden and torch lights.

View on Amazon
Bonsicoky 8.3-Inch SpikesLongest 0.83-Inch Fit

Bonsicoky 8.3-Inch Spikes

The six ABS spikes are 8.3 inches long and fit lamp holder tubes with a 21 mm, or 0.83-inch, inner diameter.

View on Amazon

Compare the stakes by fit, length, and format

#ProductDimensionsDimensions L x WWeightBuy
18.2"L x 0.83"W8.2"L x 0.83"W18.14 gView on Amazon
28.26"L x 0.82"W8.26"L x 0.82"W0.11 kgView on Amazon
3
Bonsicoky 8.3-Inch Spikes3. Bonsicoky 8.3-Inch SpikesLongest 0.83-Inch Fit
8.3"L x 8.3"W8.3"L x 8.3"W0.11 kgView on Amazon
4——2.88 ozView on Amazon
5
Galavasen 0.49-Inch Stakes5. Galavasen 0.49-Inch StakesFor wire-hole light poles
6.3"L x 4.72"W6.3"L x 4.72"W—View on Amazon
6
JELUTRIC 0.6-Inch Stakes6. JELUTRIC 0.6-Inch StakesFor 0.6-inch light poles
——16 ozView on Amazon
7
CZXNBI 8.26-Inch Stakes7. CZXNBI 8.26-Inch StakesFor multi-light pathway repairs
8.26"L x 0.86"W8.26"L x 0.86"W—View on Amazon
8
Seimneire 8.27-Inch Stakes8. Seimneire 8.27-Inch StakesFor 0.79-inch light heads
8.27"L x 0.79"W8.27"L x 0.79"W0.08 kgView on Amazon
9
NORXUAZE Base Stakes9. NORXUAZE Base StakesFor four-hole disk lights
4.57"L x 2.7"W4.57"L x 2.7"W—View on Amazon
10
Leewoth 5-Inch Stakes10. Leewoth 5-Inch StakesFor short-stake installations
4.8"L x 0.48"W4.8"L x 0.48"W1.6 ozView on Amazon

Detailed Reviews: Best Plastic Stakes For Solar Lights

RyanDesign ABS Spikes

#1 · Best Overall

1. RyanDesign ABS Spikes

  • Dimensions: 8.2"L x 0.83"W
  • Dimensions L x W: 8.2"L x 0.83"W
  • Weight: 18.14 g

Best for: For 0.83-inch light poles.

Why it ranks #1: Its reinforced, weather-resistant ABS stakes measure 8.2 inches long and fit a clearly specified 0.83-inch inner diameter; six are included.

The 8.2-inch reinforced ABS stake is specified for a 0.83-inch pole interior, giving owners of matching solar lights a direct replacement option. Its weather-resistant plastic is described as able to withstand heat, rain, and snow, making it suitable for garden, pathway, patio, or seasonal outdoor lighting.

Installation requires no tools: attach the stake to an existing pole with a 0.83-inch inside diameter, then press the pointed end into the ground. That simple connection can streamline replacing a broken stake without changing the light itself. At 8.2 inches long, it provides a substantial ground stake, while the lightweight ABS construction is intended to secure solar lights, lanterns, and holiday decorations across several outdoor settings.

Pros
  • Reinforced ABS construction
  • Specified for 0.83-inch inside diameter
  • 8.2-inch length
  • Six stakes per pack
Cons
  • Fits only poles with a 0.83-inch inside diameter.

Skip it if you have a 0.49-inch pole; Galavasen replacement stakes are specified for that narrower opening.

Choose this six-pack if your solar light pole has a 0.83-inch inside diameter and you need replacements for garden, pathway, patio, or holiday use. Its stated fit is specific, so measure the pole opening before ordering.

Full product details
BrandRyanDesign
ColorBlack-6 PACK
Item Dimensions L x W8.2"L x 0.83"W
Item Weight18.14 g
ManufacturerRyanDesign
Part NumberRd-gs82
MaterialPlastic
Model NumberRD-014
Dimensions8.2"L x 0.83"W
Recommended UsesGarden lighting, Pathway lighting, Pool area lighting, Patio lighting, Camping, Holiday lighting, Fence lighting
StyleMinimalist
Style NameMinimalist

Listed on Amazon as: 8.25" Reinforced ABS Plastic Solar Ground Spikes – Durable Solar Light Replacement Stakes for Garden, Pathway, Deck, Camping, Christmas Lights (Fits 0.83" Inside Diameter) (Black-6 Pack)

View on Amazon
Aliotech 0.83-Inch Spikes

#2 · 0.83-Inch Six-Pack

2. Aliotech 0.83-Inch Spikes

  • Dimensions: 8.26"L x 0.82"W
  • Dimensions L x W: 8.26"L x 0.82"W
  • Weight: 0.11 kg

Best for: For 0.83-inch torch lights.

Why it ranks #2: This six-pack specifies high-strength ABS, an 8.25-inch length and a 0.83-inch diameter for solar pathway, garden and torch lights.

Aliotech specifies an 8.25-inch length and 0.83-inch diameter for these reinforced ABS ground spikes, giving owners of matching solar pathway or torch lights two concrete dimensions to check. The six-piece set is also described as corrosion-resistant and suitable for outdoor use through changing weather.

Before replacing a stake, compare the light's opening with the listed 0.83-inch diameter; that fit check matters more than the broad claim of suitability for most lights. The 8.25-inch length gives a clear size for planning ground placement. Reinforced ABS is described as lightweight, strong, and corrosion-resistant, supporting outdoor use around yards, paths, pools, and gardens. Six pieces make the set useful for several compatible lights or repairs kept on hand.

Pros
  • Six reinforced ground spikes
  • 8.25-inch length
  • 0.83-inch diameter specified
  • ABS described as corrosion-resistant and weather-ready
Cons
  • The specified 0.83-inch diameter limits the set to matching light openings.

Skip it if you need ten stakes for a larger repair; CZXNBI lists a ten-piece set with an approximately 0.85-inch mounting diameter.

Aliotech suits owners of solar pathway, garden, or torch lights whose openings match the specified 0.83-inch diameter. Its six stakes and 8.25-inch length make the dimensions clear, but compatibility depends on that precise opening.

Full product details
BrandAliotech
ColorBlack
Item Dimensions L x W8.26"L x 0.82"W
Item Weight0.11 kg
ManufacturerDaDa MFG
Part Number781509903763
MaterialPlastic
Model Number18905d07-801f-40fd-9730-c69373b2b322
Dimensions8.26"L x 0.82"W
Recommended UsesGarden, Pathway, Outdoor Activities, Decoration
Special FeaturesAnti Rust
StylePlastic, Straight
Style NamePlastic, Straight
Additional InformationImportant information Safety Information Handle the sharp tip with care to avoid injury. Properly anchor stakes to prevent them from becoming dislodged. Be cautious when inserting or removing stakes to avoid damaging underground utilities.

Listed on Amazon as: Aliotech 6Pcs Reinforced Ground Spike, Solar Lights Spikes, ABS Plastic Lights Replacement Stakes for Solar Pathway Garden Torch Lights(Inside Diameter 0.83 Inches)

View on Amazon
Bonsicoky 8.3-Inch Spikes

#3 · Longest 0.83-Inch Fit

3. Bonsicoky 8.3-Inch Spikes

  • Dimensions: 8.3"L x 8.3"W
  • Dimensions L x W: 8.3"L x 8.3"W
  • Weight: 0.11 kg

Best for: For 0.83-inch lamp tubes.

Why it ranks #3: The six ABS spikes are 8.3 inches long and fit lamp holder tubes with a 21 mm, or 0.83-inch, inner diameter.

Bonsicoky's 8.3-inch ABS stake is specified for lamp-holder tubes with a 21-millimeter, or 0.83-inch, inner diameter, giving owners of matching garden lights a clear replacement target. Its six-piece set pairs a straight plastic form with lightweight, corrosion-resistant material for outdoor lighting applications.

Assembly is described as connecting the ABS stake and connector, a straightforward replacement workflow for a compatible lamp tube. The 0.83-inch interior specification is the crucial fit check; matching it to the holder can prevent a mismatched connection. At 8.3 inches long, the stake provides a defined length for ground placement. Bonsicoky also lists garden, street, and event lighting uses, while its sharp point calls for careful handling during installation.

Pros
  • 8.3-inch stake length
  • Specified for 21-millimeter or 0.83-inch tube interiors
  • Six stakes per pack
  • Lightweight, corrosion-resistant ABS plastic
Cons
  • The stated tube fit is limited to a 21-millimeter inner diameter.

Skip it if you have a 0.49-inch pole; Galavasen stakes are specified for that narrower inner diameter.

This six-pack fits buyers replacing stakes on outdoor lights with 21-millimeter inner-diameter lamp tubes. Its 8.3-inch length and simple connector assembly are useful when those dimensions match; check the tube opening before choosing it.

Full product details
BrandBonsicoky
Color6 Pack
Item Dimensions L x W8.3"L x 8.3"W
Item Weight0.11 kg
ManufacturerBonsicoky
Part NumberJR240731028
MaterialPlastic
Model NumberJR240731028
Dimensions8.3"L x 8.3"W
Recommended UsesOutdoor lighting, Street lighting, Garden lighting, Event lighting
Special Features6 Pack Size Option
StylePlastic, Straight
Style NamePlastic, Straight
Additional InformationImportant information Safety Information Caution: Handle the sharp point with care to avoid injury. Insert and remove the stake with caution to prevent damage to underground utilities. Ensure the stake is securely anchored to prevent it from becoming dislodged. Keep out of reach of children. Avoid contact with extreme temperatures or harsh chemicals.

Listed on Amazon as: Bonsicoky ABS Ground Spikes, 6 Pack, 8.3 Inch (210mm)

View on Amazon
Petriveil 0.49-Inch Stakes

#4 · Ten-Pack Option

4. Petriveil 0.49-Inch Stakes

  • Weight: 2.88 oz

Best for: For narrow 0.49-inch poles.

Why it ranks #4: Ten reinforced ABS replacement stakes are supplied for poles with a listed inner diameter of 0.49 to 0.5 inch.

The Petriveil stakes target poles with a 0.49- to 0.5-inch inner diameter, giving owners of narrow-opening solar lights a clearly specified replacement size. The ten-pack supplies multiple stakes for outdoor lawn, pathway, yard, or garden lighting, with reinforced ABS plastic construction identified in the product title.

The listed fit range makes this set most useful when a light pole's inner diameter is close to 0.49 inch; checking that measurement helps avoid choosing a stake for a wider opening. Ten replacement pieces can cover several lights or leave spares for future repairs. The listing identifies reinforced ABS plastic and outdoor solar-light replacement use, but gives no stake length, so buyers should not assume a particular insertion depth.

Pros
  • Ten stakes in the pack
  • Reinforced ABS plastic
  • Specified for 0.49- to 0.5-inch pole interiors
  • Intended for outdoor solar-light replacement
Cons
  • No stake length is provided in the supplied product specifications.

Skip it if you need a stated 8-inch stake length; RyanDesign lists its replacement stakes at 8.2 inches.

This Petriveil set suits owners replacing several outdoor solar-light stakes whose poles measure 0.49 to 0.5 inch inside. The listing does not state stake length, so choose it for the fit range rather than a known depth.

Full product details
BrandPetriveil
ColorBlack
Included Components10 Pack Replacement Solar Light Stakes
Item Weight2.88 ounces
ManufacturerPetriveil
Part NumberDD-D12H120
MaterialPlastic
Model NumberDDA-DD
Recommended UsesOutdoor solar lights Replacement Stakes
StyleModern
Style NameModern

Listed on Amazon as: 10 Pack Replacement Solar Light Stakes,0.49" ABS Plastic Reinforced Ground Spikes Fit for Pole Inner Diameter 0.49" to 0.5" – for Outdoor Lawn Pathway Christmas Solar Light Yard Garden Decor

View on Amazon
Galavasen 0.49-Inch Stakes

#5

5. Galavasen 0.49-Inch Stakes

  • Dimensions: 6.3"L x 4.72"W
  • Dimensions L x W: 6.3"L x 4.72"W

Best for: For wire-hole light poles.

Why it ranks #5: This ten-pack uses high-strength ABS and lists a 4.7-inch length and 0.5-inch diameter, with wire holes noted in the features.

Wire holes distinguish Galavasen's reinforced stakes, giving compatible solar light poles a route for wires while the stake anchors the light outdoors. Each measures 4.7 inches long and is specified for a 0.49-inch inner diameter, making this ten-pack a focused replacement choice for narrow-fit landscape and garden lights.

The stated 0.49-inch fit helps narrow the compatibility check before installation, while the 4.7-inch length tells buyers what stake depth to expect. Setup is described as pressing the sharp stake into the ground and connecting the light, with no separate tool step listed. High-strength ABS is characterized as lightweight, corrosion-resistant, and weather-resistant for outdoor use. Wire holes add a practical feature for poles that need wire routing; handle the pointed ends carefully.

Pros
  • Wire holes for compatible light-pole wiring
  • Ten replacement stakes
  • 4.7-inch length
  • High-strength ABS described as corrosion-resistant
Cons
  • At 4.7 inches, these stakes are shorter than the listed 8-inch options.

Skip it if you need an 8-inch stake; Bonsicoky lists an 8.3-inch option for poles with a 0.83-inch interior.

Pick Galavasen if your light pole has a 0.49-inch interior and wire holes suit its wiring arrangement. Its 4.7-inch stake length is the key boundary, so it is not the choice for buyers seeking a longer anchor.

Full product details
BrandGalavasen
ColorBlack
Item Dimensions L x W6.3"L x 4.72"W
ManufacturerGalavasen
Part NumberSolar Light Replacement Stakes
MaterialAcrylonitrile Butadiene Styrene (ABS)
Model NumberDDA-D12H120
Dimensions6.3"L x 4.72"W
Recommended UsesOutdoor Decorative Lighting
Special FeaturesReinforced Ground Spikes
StyleModern
Style NameModern
Additional InformationImportant information Safety Information CAUTION: This product contains sharp spikes. Always wear appropriate protective gear when handling. Be aware of your surroundings and avoid underground utilities when inserting the stakes. Always insert and remove the stakes with care to prevent injury. Keep out of reach of children.

Listed on Amazon as: 10 Pack Solar Light Stakes Replacement (Fit for Inner Diameter 0.49 inch), Plastic Reinforced Ground Spikes for Solar Wheat Ear Flower Light Outdoor Landscape Path Christmas Yard Garden Deco

View on Amazon
JELUTRIC 0.6-Inch Stakes

#6

6. JELUTRIC 0.6-Inch Stakes

  • Weight: 16 oz

Best for: For 0.6-inch light poles.

Why it ranks #6: Eight reinforced ABS stakes target a specific 0.6-inch pole inner diameter, making them a useful size-specific replacement option.

JELUTRIC's key distinction is a 0.6-inch pole fit, a less common stated size that helps owners of matching solar lights select a replacement. The eight-piece set uses reinforced, weather-resistant ABS and is described as suitable for securing solar lights, lanterns, and holiday decorations outdoors.

The tool-free installation instructions call for attaching each stake to an existing pole with a 0.6-inch inner diameter, then placing it in the ground. That can make a straightforward repair when the measurement matches, while avoiding a separate tool step. The listing says the ABS can withstand heat, rain, and snow, supporting seasonal outdoor placement. Eight stakes cover multiple lights; the sharp pointed ends require care when installing or removing them.

Pros
  • Eight replacement stakes
  • Specified for 0.6-inch inner diameter
  • Reinforced weather-resistant ABS
  • Tool-free attachment to a compatible pole
Cons
  • Fits only poles with a 0.6-inch inner diameter.

Skip it if you need a 0.83-inch pole fit; RyanDesign specifies that wider inner diameter for its replacement stakes.

Choose JELUTRIC when your solar light pole has a 0.6-inch interior and you need several outdoor replacements. Its tool-free attachment and eight-piece quantity suit grouped lights, but the stated diameter is the deciding fit boundary.

Full product details
BrandJELUTRIC
ColorBlack
Item Weight16 ounces
ManufacturerJELUTRIC
Part Numberstake1
MaterialPlastic
Model Numberstake1
Recommended UsesOutdoor
StyleStraight
Style NameStraight
Additional InformationImportant information Safety Information Caution: Handle sharp pointed end with care to avoid injury. Always wear gloves when installing or removing stakes. Avoid contact with underground utilities during installation. Ensure stakes are securely anchored to prevent dislodging and causing harm. Keep out of reach of children and pets.

Listed on Amazon as: 8 Pcs Solar Light Stakes Replacement (Fit for Inner Diameter 0.6inch),Reinforced Ground Spikes,ABS Plastic Lights Stakes, Ideal for Solar Pathway Lights Garden Torch Lights,Christmas Lights

View on Amazon
CZXNBI 8.26-Inch Stakes

#7

7. CZXNBI 8.26-Inch Stakes

  • Dimensions: 8.26"L x 0.86"W
  • Dimensions L x W: 8.26"L x 0.86"W

Best for: For multi-light pathway repairs.

Why it ranks #7: The ten-pack offers 8.26-inch plastic stakes and a stated approximate mounting diameter of 0.85 inches for pathway and garden lights.

CZXNBI supplies ten 8.26-inch plastic stakes, giving people repairing several pathway or garden lights a larger set of replacement pieces. The listing puts the mounting diameter at approximately 0.85 inches, or 21.7 millimeters, and names solar, low-voltage LED, and decorative post lights among compatible uses.

The ten-piece quantity can support a row of outdoor lights or provide replacements for multiple broken stakes at once. Its approximate 0.85-inch mounting diameter gives buyers a concrete measurement to compare with their light poles before installation. The 8.26-inch length offers a stated stake size for planning ground placement. Listed applications include residential walkways and driveways as well as park and hotel pathway accents, extending its stated use beyond a small garden setup.

Pros
  • Ten stakes in the set
  • 8.26-inch length
  • Approximately 0.85-inch mounting diameter specified
  • Listed for solar and low-voltage LED lights
Cons
  • The stated mounting diameter is approximate, not an exact fit range.

Skip it if you need a stated 0.83-inch inside-diameter fit; Aliotech specifies that measurement for its replacement stakes.

Consider CZXNBI when replacing multiple stakes for pathway, garden, or decorative outdoor lights, especially if the approximate 0.85-inch mounting diameter matches. Confirm your pole measurement, since the listing gives an approximate diameter rather than a range.

Full product details
BrandCZXNBI
ColorBlack
Item Dimensions L x W8.26"L x 0.86"W
ManufacturerCZXNBI
Part NumberCZ-25DD10
Model NumberCZ-25DD10
Dimensions8.26"L x 0.86"W
Recommended Usessecuring outdoor pathway and garden lights, replacing broken stakes, residential driveway and walkway lighting, commercial park and hotel pathway accent lighting, seasonal and holiday decorative ground lighting

Listed on Amazon as: 10PCS Stakes for Outdoor Lights – 8.26 Inch Pathway Light Stake for Solar & Garden Lights,Replacement Stakes for Solar Lights

View on Amazon
Seimneire 8.27-Inch Stakes

#8

8. Seimneire 8.27-Inch Stakes

  • Dimensions: 8.27"L x 0.79"W
  • Dimensions L x W: 8.27"L x 0.79"W
  • Weight: 0.08 kg

Best for: For 0.79-inch light heads.

Why it ranks #8: Four ABS stakes measure 8.27 inches long with a 0.79-inch installation head diameter, a specified alternative to larger fits.

Seimneire gives two useful dimensions: an 8.27-inch stake length and a 0.79-inch installation-head diameter. Those measurements help owners check a replacement against their outdoor decorative lights before setup. The four-piece set is made from ABS plastic described as impact-resistant and resistant to damage or deformation.

The 0.79-inch head diameter and 1.18-inch installation-base height provide more fit information than length alone, helping buyers compare the stake with their existing light connection. At 8.27 inches long, it offers a defined size for ground placement around lawns, gardens, parks, and courtyards. ABS plastic is described as durable and impact-resistant, supporting repeated outdoor use. The four-piece quantity is suited to a smaller repair or a limited number of replacement lights.

Pros
  • 8.27-inch length
  • 0.79-inch installation-head diameter
  • 1.18-inch installation-base height
  • Impact-resistant ABS plastic
Cons
  • The pack contains four stakes, fewer than the listed ten-piece sets.

Skip it if you need ten replacements at once; Petriveil supplies ten stakes for poles measuring 0.49 to 0.5 inch inside.

Seimneire is a measured-fit option for buyers replacing a few outdoor light stakes who can use its 0.79-inch head and 1.18-inch base dimensions. Its four-piece pack is a boundary for larger rows of lights.

Full product details
BrandSeimneire
ColorBlack
Item Dimensions L x W8.27"L x 0.79"W
Item Weight0.08 kg
ManufacturerSeimneire
Part NumberDX240806-858
MaterialPlastic
Model NumberDX240806-858
Dimensions8.27"L x 0.79"W
Recommended UsesOutdoor decorative lighting, Lawn and garden illumination, Park and courtyard lighting, Street lamp and small street lamp post replacement
StyleLight Stake
Style NameLight Stake

Listed on Amazon as: 4 PCS Black 8.27 Inch Solar Light Stakes

View on Amazon
NORXUAZE Base Stakes

#9

9. NORXUAZE Base Stakes

  • Dimensions: 4.57"L x 2.7"W
  • Dimensions L x W: 4.57"L x 2.7"W

Best for: For four-hole disk lights.

Why it ranks #9: These ten replacement sets suit standard four-hole solar-light bases with 55 mm diagonal spacing, rather than the pole-insert fit used by most picks.

NORXUAZE specifies compatibility with standard four-hole solar light bases using 55-millimeter diagonal spacing, giving owners of matching disk or garden lights a distinct mounting check. The ten-set uses ABS stakes that interlock by hand, so installation starts with joining the halves before pressing them into soil.

The four-hole base pattern and 55-millimeter diagonal spacing help buyers assess compatibility before replacing a stake, particularly for pathway disk lights and glass-ball garden lights. Tool-free hand assembly simplifies setup, and the listed ridges are intended to resist rotation or upward movement once inserted. Textured surfaces are described as improving grip, while the ABS construction is presented for seasonal outdoor use. Take extra care in sandy or rocky ground and handle the pointed end cautiously.

Pros
  • Specified for standard four-hole bases
  • 55-millimeter diagonal spacing listed
  • Ten sets
  • Hand-interlocking halves and ridges intended to resist movement
Cons
  • Compatibility is specified for four-hole bases, not other mounting patterns.

Skip it if you have a 0.83-inch pole-style light; Aliotech specifies that diameter for its straight replacement stakes.

This set fits buyers with four-hole solar light bases matching the stated 55-millimeter diagonal spacing, including compatible pathway disk lights. Check the base pattern first; its mounting approach differs from a simple pole-interior fit.

Full product details
BrandNORXUAZE
Color10Set
Item Dimensions L x W4.57"L x 2.7"W
ManufacturerNORXUAZE
Part Numbersolar light stakes replacement
MaterialAcrylonitrile Butadiene Styrene (ABS)
Model Numberreplacement stakes for solar lights
Dimensions4.57"L x 2.7"W
Recommended UsesOutdoor lighting applications
StyleRugged, Functional Black Plastic
Style NameRugged, Functional Black Plastic
Additional InformationImportant information Safety Information Use caution when installing in sandy or rocky ground. Be careful when handling the sharp pointed end during installation and removal. Ensure stakes are properly inserted to prevent rotation or upward movement. While made of ABS plastic, no specific material-related safety precautions are mentioned.

Listed on Amazon as: 10 Pack Solar Light Replacement Stakes – Reinforced Plastic Ground Spikes for Solar Pathway Disk Lights, Garden Glass Ball Outdoor Lights – Secure Anchor Post for Landscape Lighting Accessories

View on Amazon
Leewoth 5-Inch Stakes

#10

10. Leewoth 5-Inch Stakes

  • Dimensions: 4.8"L x 0.48"W
  • Dimensions L x W: 4.8"L x 0.48"W
  • Weight: 1.6 oz

Best for: For short-stake installations.

Why it ranks #10: This listing describes short 5-inch landscape stakes and extension pipes, but provides less direct solar-light pole-fit information than the other options.

Leewoth combines plastic ground stakes with extended pipes, giving buyers two listed components for connecting landscape or security lights. The ground stakes are specified at about five inches long and 0.5 inch wide, while the product information describes high-strength ABS as lightweight, sturdy, and corrosion-resistant.

The listed package content is five landscape stakes and five extended pipes, and the instructions describe connecting a grounding-post connector for installation. That combination may suit a setup needing both a ground anchor and an extension component. The stake's 0.5-inch width and roughly five-inch length are important fit and placement checks; the supplied product dimensions also list 4.8 by 0.48 inches. ABS construction is described as light and corrosion-resistant for outdoor use.

Pros
  • Five stakes and five extended pipes listed
  • Ground stake measures about 0.5 by 5 inches
  • High-strength ABS plastic
  • Lightweight and corrosion-resistant material
Cons
  • The listed ground stake is about five inches long.

Skip it if you need an 8-inch ground spike; Aliotech lists an 8.25-inch replacement for compatible 0.83-inch openings.

Leewoth suits buyers whose landscape-light setup can use both short ground stakes and extended pipes, with ABS material for outdoor placement. Its roughly five-inch stake length is the main boundary when deeper ground placement is needed.

Full product details
BrandLeewoth
ColorBlack
Item Dimensions L x W4.8"L x 0.48"W
Item Weight1.6 ounces
ManufacturerLeewoth
Part Number236
Model Number236
Dimensions4.8"L x 0.48"W

Listed on Amazon as: 10pcs Landscape Light Stakes Plastic Ground Spikes ABS Ground Spikes Solar Lights Replacement Stakes Garden Lights Landscape Security Light 5" x 0.5"

View on Amazon

Avoid the pole-fit mismatch

A stake can be the right length and still fail to connect if its receiving diameter does not match your light pole. The listings distinguish several incompatible sizes: RyanDesign ABS Spikes, Aliotech 0.83-Inch Spikes and Bonsicoky 8.3-Inch Spikes specify about 0.83 inch, while Petriveil 0.49-Inch Stakes targets a 0.49-to-0.5-inch inner diameter and JELUTRIC 0.6-Inch Stakes specifies 0.6 inch. Galavasen 0.49-Inch Stakes lists a 0.5-inch diameter.

Those numbers describe different fit points, so do not assume a stake will stretch or adapt. Measure the inside of the light pole where the stake inserts, then compare that measurement with the listing’s stated compatibility.

Also note that NORXUAZE Base Stakes use a four-hole base mounting pattern, not the same pole-insert arrangement. The safest selection is the one whose connector style and measurement match your existing fixture.

Why a stake may still loosen

A compatible plastic stake can still shift if the ground does not support it securely. Product listings warn about secure anchoring, dislodging and—in one case—sandy or rocky soil; they do not provide comparative holding tests or soil-specific performance data. Longer options such as the 8.2-to-8.3-inch stakes may suit buyers seeking a full-length ground spike, while the Galavasen listing specifies only 4.7 inches and Leewoth lists a 5-inch stake.

Length alone cannot establish how firmly a stake will hold in a particular yard. Check the soil before installation and avoid forcing a pointed spike into ground where underground utilities may be present.

If the light uses a plate-style base, make sure its hole pattern matches instead of treating it as a conventional stake. Careful installation and exact connector fit help avoid damage, but the supplied specifications cannot guarantee resistance to movement in every soil condition.

How to Choose Solar Light Stakes

Pole connection diameter

Start by matching the stake’s listed fit to the inside diameter of your light pole. The options span roughly 0.49 to 0.85 inches: Petriveil 0.49-Inch Stakes lists 0.49 to 0.5 inch, JELUTRIC 0.6-Inch Stakes specifies 0.6 inch, and RyanDesign ABS Spikes and Aliotech 0.83-Inch Spikes specify 0.83 inch. CZXNBI 8.26-Inch Stakes describes an approximate mounting diameter of 0.85 inch.

These are not interchangeable just because they are all replacement stakes. Measure the pole opening and confirm whether the listing refers to an inner diameter, head diameter or approximate mounting diameter.

A buyer repairing a narrow-pole light should focus on the 0.49-inch options; owners of larger fittings should compare the 0.83-inch selections.

Stake length and mounting style

Choose a stake length and connection style that suit the existing light, rather than assuming one format fits all. Many options measure about 8.2 to 8.3 inches: RyanDesign ABS Spikes lists 8.2 inches, Bonsicoky 8.3-Inch Spikes lists 8.3 inches, and Seimneire 8.27-Inch Stakes lists 8.27 inches. Galavasen 0.49-Inch Stakes is shorter at 4.7 inches, while Leewoth 5-Inch Stakes lists a 5-inch stake and separate extension pipes.

NORXUAZE Base Stakes instead use a four-hole base with 55 mm diagonal spacing. Longer stakes may suit buyers replacing a similarly long spike; the shorter styles may be appropriate when matching an existing short component.

Check the assembly format and dimensions before treating length as the deciding factor.

Pack quantity and material

Compare the number of replacements in the package and the exact material description against the number of lights you need to repair. Listed quantities range from four Seimneire 8.27-Inch Stakes to ten each for Petriveil 0.49-Inch Stakes, Galavasen 0.49-Inch Stakes, CZXNBI 8.26-Inch Stakes and NORXUAZE Base Stakes; several other choices come in six or eight. Most listings identify plastic or ABS, and several specifically describe reinforced or high-strength ABS.

For one or two broken fixtures, a four- or six-piece pack may be sufficient; maintaining a row of lights may make a larger pack more practical. Do not let pack size override fit: a larger quantity does not make a stake compatible with a different pole diameter or base pattern.

Which Solar Light Stake Should You Choose?

For a 0.83-inch pole and a standard full-length replacement, choose RyanDesign ABS Spikes: it combines an 8.2-inch length, reinforced weather-resistant ABS and a six-pack. If you need the same general diameter in an alternative six-pack, Aliotech 0.83-Inch Spikes lists an 8.25-inch length; Bonsicoky 8.3-Inch Spikes is another 0.83-inch option. For a narrow 0.49-to-0.5-inch connection, compare Petriveil 0.49-Inch Stakes and Galavasen 0.49-Inch Stakes; the former specifies a fit range, while the latter lists its 4.7-inch length.

Choose JELUTRIC 0.6-Inch Stakes only if that diameter matches. For a four-hole base, consider NORXUAZE Base Stakes.

Leewoth 5-Inch Stakes has a different, shorter format, so check its connector carefully.

Frequently Asked Questions

How can I measure a solar light pole’s inner diameter accurately?

Measure the opening inside the pole, not its outside width. A caliper gives a direct inner-diameter reading; if you use a ruler, line it up across the widest part of the opening and read carefully. Compare that measurement with the stake’s listed fit, since a small mismatch can prevent a secure connection.

Will plastic ground stakes hold securely in compacted or rocky soil?

They may not hold securely in every compacted or rocky spot. Soil conditions vary, and the product details do not establish performance in those conditions. Check the ground before installation, avoid forcing a stake against a rock, and choose a different placement if it will not enter or sit firmly.

Can I replace only a broken stake without changing the solar light’s connector?

Yes, if the replacement stake matches the light pole’s connector dimensions and connection style. Check the pole’s inner diameter and compare it with the stake’s stated fit range before ordering. Do not assume that stakes with similar lengths or appearances will fit; the listed diameters vary across these options.

How should I choose between a full-length stake and a shorter one?

Match the replacement’s length to the format you need and check that its connector fits the light. The options include stakes listed at about 8.2 to 8.3 inches and a separate 5-inch format. Leewoth’s 5-inch stake is shorter, so verify its connector and intended placement before choosing it.

Which listed stakes fit a 0.83-inch pole?

RyanDesign ABS Spikes and Aliotech 0.83-Inch Spikes are listed for 0.83-inch connections; Bonsicoky 8.3-Inch Spikes is also identified as a 0.83-inch option in the article verdict. Confirm the pole’s inner diameter before buying, because these fit details do not indicate universal compatibility with other solar lights.

Final Words

For a 0.83-inch pole and a standard full-length replacement, RyanDesign ABS Spikes is the lead choice: its reinforced, weather-resistant ABS construction, 8.2-inch length, and six-pack suit several repairs. Confirm the inner diameter first. Aliotech offers another 0.83-inch six-pack, while Bonsicoky is another option.

For narrower connections, compare the listed 0.49-inch choices; select the 0.6-inch or four-hole-base option only when its fit matches. Check the connector carefully for shorter formats.