Best Bumper Pull Trailer Hitch for RV Bumpers

#1 · Best Overall

1. Nilight RV Bumper Hitch Receiver 4×4

• Maximum Towing Capacity: 3500 lb
• Material: Carbon Steel
• Compatible with Vehicle Type: Trailer

Best for: Higher-capacity 4-inch RV racks.

Why it ranks #1: Fits 4-by-4-inch RV rear bumpers and has a 2-inch receiver, 3,500-pound gross trailer weight rating, and 350-pound tongue weight rating.

A 3,500-pound gross trailer-weight rating and 350-pound tongue-weight rating distinguish this Nilight receiver for owners of 4-by-4-inch square RV bumpers. Its 2-inch opening fits most matching bike racks and cargo carriers, enabling a standard accessory connection within those stated load limits.

The standard 2-by-2-inch receiver accepts most bike racks and cargo carriers with a 2-inch shank, making it straightforward to pair with compatible accessories. Nilight lists 3,500 pounds gross trailer weight and 350 pounds tongue weight, subject to the lowest-rated component in the setup; buyers should use that restriction when planning a load. Carbon-steel construction and bolt-on mounting describe the receiver's material and attachment style, while the specified 4-by-4-inch bumper fit sets the installation boundary.

Skip it if you have a 4.5-inch beam; Nilight's 92116B lists fit for beams from 4 to 4.5 inches.

This Nilight suits RV owners with a 4-by-4-inch bumper seeking a receiver for compatible racks or carriers and a stated 350-pound tongue rating. Check every component's limit, since the lowest rating governs the setup.

Listed on Amazon as: Nilight RV Bumper Hitch Receiver Fits for 4 inch X 4 inch Square RV Rear Bumpers 2 inch Receiver 3500 LBS Capacity Bolt-On Heavy Duty Steel for Camper Bike Racks Cargo Carriers

#2 · Wide Beam Fit

2. YZONA RV Bumper Hitch Receiver

• Maximum Towing Capacity: 3500 lb
• Material: Carbon Steel
• Compatible with Vehicle Type: RV

Best for: Adjustable-beam RV rack users.

Why it ranks #2: Fits rear beams from 2 to 4 inches and lists 3,500 pounds maximum towing capacity with a 350-pound tongue weight capacity.

A stated fit spanning 2- to 4-inch rear beams gives the YZONA receiver broader beam-size coverage than a single-size RV bumper adapter, enabling compatible accessory mounting across that range. Its 2-inch opening serves common hitch accessories, and its listed capacity is 3,500 pounds gross trailer weight.

The 2-inch receiver opening accommodates listed uses including cargo carriers, bike racks, tire carriers, and ball mounts, letting buyers match the adapter to several accessory types. High-strength carbon steel supports the stated 3,500-pound gross trailer weight and 350-pound tongue weight ratings. A black protective coating is specified to guard against corrosion and damage, a practical consideration for an exterior RV mounting point exposed to the elements. Check the bumper beam dimensions against the 2- to 4-inch fit range.

Skip it if you have a 4.5-inch bumper beam; Nilight's 92116B lists fit for beams from 4 to 4.5 inches.

Pick the YZONA for an RV with a 2- to 4-inch rear beam and a need to mount compatible racks, carriers, or a ball mount. Its listed limits are 350 pounds tongue weight and 3,500 pounds gross trailer weight.

Listed on Amazon as: RV Bumper Hitch Receiver, 2" Tow Hitch Trailer, 3500 LBS Capacity Fits 2 inch to 4 inch Rear Beams, Towing Adapter Openning for Camper Cargo Carrier Bike Racks RV Tire Carrier Ball Mounts

#3 · Adjustable Beam Fit

3. Fioracl RV Bumper Hitch Receiver

• Maximum Towing Capacity: 3500 lb
• Material: Alloy Steel
• Compatible with Vehicle Type: Trailer

Best for: Variable-width bumper owners.

Why it ranks #3: Its adjustable design is described as fitting different beam widths and heights, with a 2-inch receiver and listed 3,500-pound capacity.

An adjustable clamping design that locks around different steel-beam widths and heights is the defining feature of this Fioracl adapter, enabling buyers to accommodate varied bumper dimensions. Its 2-inch receiver opening also connects with many common racks and carriers, provided their shanks match the receiver.

Fioracl specifies compatibility with beams from 2.5 to 4 inches and says the adjustment function locks the beam to prevent shaking, which helps address fit across differing bumper dimensions. The 2-by-2-inch tube opening supports most bike racks, cargo carriers, hitch steps, and RV tire racks with matching shanks. Alloy-steel construction and a listed 3,500-pound maximum towing capacity offer further selection details; buyers should still observe the rating of the complete setup.

Skip it if you need a receiver for a 2-inch beam; YZONA's RV Bumper 2-inch Trailer Hitch Receiver lists fit from 2 inches.

Consider the Fioracl when bumper width or height varies within its stated 2.5- to 4-inch beam range and you want a receiver for common RV accessories. Its adjustment is useful, but it does not cover beams narrower than 2.5 inches.

Listed on Amazon as: RV Bumper Hitch Receiver 2 inch Adapter for 2.5 inch to 4 inch Beams, Trailer Hitch Receiver, Fits for Cargo Carrier Bike Racks

#4 · Hardware Included

4. Ohuhu RV Bumper Hitch

• Maximum Towing Capacity: 3500 lb
• Material: Alloy Steel
• Compatible with Vehicle Type: Trailer

Best for: No-weld 4-inch bumper setup.

Why it ranks #4: Fits a 4-by-4-inch RV or travel trailer bumper and includes a hitch pin and cover, alongside a listed 3,500-pound towing capacity.

No-weld installation is the Ohuhu receiver's most direct advantage, enabling buyers to mount a 2-inch accessory receiver without a welding step. It is specified for 4-by-4-inch RV or travel-trailer bumpers and includes a hitch pin and cover, useful hardware for securing and closing the receiver.

The listed 4-by-4-inch bumper fit defines where this adapter is intended to mount, while its 2-inch receiver connects to compatible bike racks, tire racks, and cargo racks. A hitch pin is included, and product information says the pins help reduce wobbling; the included cover closes the receiver when unused. Alloy steel with E-coat and black powder coating is specified to help resist rust and corrosion, relevant for a bumper-mounted component exposed outdoors.

Skip it if you have a beam outside the 4-by-4-inch fit; YZONA's receiver lists a broader 2- to 4-inch beam range.

The Ohuhu suits RV owners who want a no-weld receiver for compatible accessories and appreciate an included pin and cover. Keep its specified 4-by-4-inch bumper fit in view when checking the installation location.

Listed on Amazon as: Ohuhu RV Bumper Hitch 2" Receiver Adapter with Hitch Pin and Hitch Cover

#5

5. METOWARE RV Bumper Hitch Receiver

• Maximum Towing Capacity: 3500 lb
• Material: Alloy Steel
• Compatible with Vehicle Type: Car, RV, Truck

Best for: Four-inch bumper accessory users.

Why it ranks #5: Designed for a 4-inch square bumper and standard 2-inch hitch accessories, with a listed 3,500-pound capacity and 350-pound tongue rating.

A specific fit for a 4-inch square bumper paired with a 350-pound tongue-weight rating makes this METOWARE receiver a clear match for RV owners seeking a common accessory mount. Its standard 2-by-2-inch hitch opening supports compatible Class III/IV ball mounts, bike racks, and cargo accessories.

The 2-by-2-inch receiver opening gives compatible accessories a standard connection point, while the stated compatibility includes most Class III/IV ball mounts, bike racks, and tow cargo. High-strength alloy steel provides the receiver's listed construction, and the product specifies a 3,500-pound maximum towing capacity alongside 350 pounds of tongue weight. Those figures help buyers assess a proposed load, but the stated 4-inch square bumper fit remains the central installation constraint.

Skip it if you need a receiver for a 4.5-inch beam; YZONA's RV Bumper 2-inch Trailer Hitch Receiver lists fit for beams up to 4 inches.

This METOWARE receiver fits buyers mounting compatible accessories to a 4-inch square RV bumper, with listed ratings of 3,500 pounds towing and 350 pounds tongue weight. Confirm the bumper dimensions and load against connected-component limits.

Listed on Amazon as: RV Bumper Hitch Receiver Fits 4" Square Bumper, 3500 LBS Capacity

#6

6. TOPTOW RV Bumper Hitch Receiver

• Maximum Towing Capacity: 3500 lb
• Material: Alloy Steel
• Compatible with Vehicle Type: 4" X 4" RV REAR BUMPER

Best for: Rack-only 4-by-4 RV users.

Why it ranks #6: Fits 4-by-4-inch bumpers and supports 2-inch accessories, but its listing explicitly says it is not intended for RV trailer towing.

A clearly stated warning against RV-level trailer towing makes this TOPTOW receiver a rack-and-carrier choice rather than a general towing solution, helping buyers distinguish its intended use. Its 2-inch opening fits many matching accessories, and the receiver is specified for 4-by-4-inch beams.

The standard 2-inch receiver accepts most bike racks and cargo carriers with a matching shank, turning a bare 4-by-4-inch RV rear bumper into an accessory mounting point. TOPTOW lists a 350-pound tongue-weight capacity, but explicitly says the product is not intended for RV-level trailer towing; that usage boundary should guide load planning. Installation bolts must be secured tightly around the bumper, and the receiver can be mounted upside down. A 5/8-inch hitch pin or lock is not included.

Skip it if you need RV-level trailer towing; Nilight's 92123B lists a 3,500-pound gross trailer-weight rating.

Choose TOPTOW for bike racks or cargo carriers on a 4-by-4-inch RV bumper, not for RV-level trailer towing. Tighten the mounting bolts securely, and account for the separately sourced 5/8-inch pin or lock.

Listed on Amazon as: TOPTOW RV Bumper Hitch Receiver for 4in x 4in Beams,2in Receiver | Fits for Bike Racks, Cargo Carriers Camper-on, 3500lbs

#7

7. Nilight RV Bumper Hitch Receiver 4-4.5

• Material: Alloy Steel, Carbon Steel
• Compatible with Vehicle Type: Trailer

Best for: Light-duty RV rack carriers.

Why it ranks #7: Fits beams from 4 to 4.5 inches and offers a 2-inch receiver, but its listed 2,000-pound gross trailer and 200-pound tongue ratings are lower.

A 2-inch receiver opening paired with a 200-pound tongue-weight rating makes the Nilight a focused option for carrying compatible racks and cargo on an RV bumper. Its stated fit is for 4- to 4.5-inch beams, giving buyers a defined bumper range to check before choosing accessories.

The standard 2-by-2-inch opening accepts most bike racks and cargo carriers with a 2-inch shank, so existing accessories may transfer without a special adapter. Nilight lists 200 pounds of tongue weight and 2,000 pounds of gross trailer weight, with the lowest-rated towing component governing; that distinction matters when choosing a load. Alloy and carbon steel construction provides the receiver structure, while the bolt-on format suits buyers seeking a bumper-mounted receiver rather than a welded installation.

Skip it if you need a 350-pound tongue-weight rating; Nilight's 92123B lists that higher capacity for 4-by-4-inch bumpers.

Choose this Nilight for a light-to-moderate rack or cargo-carrier setup on a 4- to 4.5-inch RV beam. Its 200-pound tongue-weight limit makes load selection and the rating of every connected component important.

Listed on Amazon as: Nilight RV Bumper Hitch Receiver Fits for 4-4.5 inches Beams 2 inch Receiver 200 LBS Capacity Bolt-On Heavy Duty Steel for Camper Bike Racks Cargo Carriers

#8

8. JMTAAT RV Bumper Hitch Receiver

• Material: Alloy Steel

Best for: Four-to-4.5-inch bumper owners.

Why it ranks #8: The title identifies a fit for 4-to-4.5-inch bumpers, but the supplied specifications do not state capacity or included installation hardware.

The title specifies a 2-inch receiver adapter for 4- to 4.5-inch bumpers, giving this JMTAAT option a defined bumper-size range for buyers to compare. Its alloy-steel specification identifies the receiver material, but the supplied listing does not provide a load-capacity figure for evaluating heavier applications.

For an owner whose bumper measures within the stated 4- to 4.5-inch range, the title's 2-inch adapter format indicates a standard receiver opening for compatible accessories. The alloy-steel specification provides a material detail relevant to selecting a bumper-mounted component. However, the supplied facts do not state a maximum towing capacity or tongue-weight rating, so buyers cannot use this listing alone to assess a rated load; that makes it better suited to decisions where capacity documentation is available separately.

Skip it if you need a stated 3,500-pound capacity; Nilight's 92123B lists gross trailer and tongue-weight ratings.

The JMTAAT is an option to investigate for a 4- to 4.5-inch bumper and compatible 2-inch accessories. Because the supplied facts omit load ratings, choose it only when you can establish capacity for your intended use.

Listed on Amazon as: RV Bumper Hitch Receiver 2 inches Adapter for 4-4.5 inches Bumper

#9

9. Nilight JK-61A Jeep Hitch Kit

• Maximum Towing Capacity: 3500 lb
• Material: Alloy Steel
• Compatible with Vehicle Type: Car, Trailer

Best for: Four-door Wrangler JK owners.

Why it ranks #9: This is a vehicle-specific receiver kit for 2007–2018 Jeep Wrangler JK four-door models, not a universal RV bumper receiver.

A vehicle-specific rear-bumper receiver kit for 2007–2018 four-door Jeep Wrangler JK models includes a 4-pin wiring harness, enabling a defined hitch-and-wiring setup for compatible JK owners. The listed 3,500-pound maximum towing capacity adds a stated figure for evaluating the intended towing application.

The 2-inch receiver gives the kit a standard opening for compatible hitch accessories, while the included 4-pin harness supports the listed wiring component in the same package. Its alloy-steel construction and 3,500-pound maximum towing capacity provide useful selection details for a JK owner planning a compatible setup. Fit is explicitly limited to 2007–2018 four-door Wrangler JK models; the title excludes JL models, so this is not a universal bumper receiver for other vehicles.

Skip it if you own a Wrangler JL or need a universal RV bumper receiver; Nilight's 92123B is listed for 4-by-4-inch RV bumpers.

This kit suits owners of the specified four-door Wrangler JK who want a receiver and 4-pin harness together. Its vehicle-specific fit excludes JL models, so identify the Wrangler generation and body configuration before selecting it.

Listed on Amazon as: Nilight – JK-61A 2" inch Rear Bumper Tow Trailer Hitch Receiver Kit, Compatible for 2007-2018 Jeep Wrangler JK 4 Door & 2 Unlimited, w/4-Pin Wiring Harness (Exclude JL Models)

#10

10. EZ Travel Collection Tow Hitch Receiver

• Maximum Towing Capacity: 5000 lb
• Material: Alloy Steel
• Compatible with Vehicle Type: Car, Truck, Van

Best for: Custom bolt-on or weld-on builds.

Why it ranks #10: Its 2-inch receiver and 5,000-pound rating suit a bumper-mounted cargo tube, but the listing does not establish fit for an RV bumper.

The choice of bolt-on or weld-on attachment gives this EZ Travel Collection receiver flexibility for a bumper-mounted cargo-tube installation, enabling buyers to select an attachment method for their setup. Its standard 2-by-2-inch square receiver and stated 5,000-pound load rating provide key compatibility and capacity details.

A 2-by-2-inch square tube receiver connects with compatible accessories, while reinforced tow-hook holes add a specified reinforcement detail at the attachment area. The listing allows either welding or bolting and specifically calls for bolting for heavy-duty use, giving installers a stated method distinction. Its 5,000-pound load rating is higher than the figures listed for several RV bumper adapters, but the product is presented as a bumper-mounted cargo tube hitch and fit should be assessed for the intended vehicle.

Skip it if you want a ready-fit 4-by-4-inch RV bumper adapter; Ohuhu's Y60-81000-23-26 is specified for that bumper size.

This receiver suits an installer seeking a 2-inch cargo-tube hitch with a choice of bolt-on or weld-on attachment. For heavy-duty use, the listing specifies bolting; assess the bumper and installation method for your application.

Listed on Amazon as: Bolt On 2-Inch Tow Hitch Receiver for Bumper Mounted Cargo Tube Hitch