Best Concrete Molds For Garden Statues for DIY Garden Décor

#1 · Best Overall

1. SvitMolds Garden Gnome Welcome

• Material: Cement
• Material Type: Cement
• Dimensions: 1.97"D x 11.02"W x 21.26"H

Best for: Welcome-sign garden makers.

Why it ranks #1: This garden gnome statue mold lists 21.26-by-11.22-by-1.97-inch dimensions and 1.9–2 mm ABS construction for casting a substantial welcome figure.

The gnome’s integrated “Welcome” theme turns this mold into a garden greeting rather than a generic figure, giving DIY casters a defined entryway project. Its stated 540 × 280 × 50 mm size yields a substantial, relatively shallow form, while the ABS construction supports repeat casting for outdoor décor.

The 1.9–2 mm ABS mold is specified for a Garden Gnome Welcome statue, so it suits makers seeking a reusable form for a consistent focal piece. Its 540 × 280 × 50 mm dimensions indicate a broad, shallow profile that can sit near an entrance without the depth of a freestanding figure. Casting details can vary with the geometry, and the listing identifies outdoor use and wipe-clean care, which helps clarify placement and basic upkeep.

Skip it if you want a deep, three-dimensional animal figure; the listed gnome form is only 50 mm deep.

Choose this SvitMolds form if a welcoming gnome plaque is the garden focal point you want to cast. Its broad, 50 mm-deep profile fits shallow décor better than a deep freestanding statue, so plan placement accordingly.

Listed on Amazon as: Mold DIY Garden Gnome Welcome Casting Concrete Decor Garden Leprechaun Cement Garden Decor D36

#2 · Best 3D Animal

2. BETONEX Crocodile Mold

• Material: Plastic
• Material Type: Plastic

Best for: Crocodile path-and-lawn casters.

Why it ranks #2: The listing explicitly describes a reusable 3D crocodile mold for concrete or plaster, making it a direct fit for a sculptural garden animal.

A reusable 3D crocodile form pairs garden-statue casting with a stated path-making option, letting makers use one mold for more than a single decorative figure. BETONEX lists plaster and concrete as casting materials and says the mold can produce over 50 tiles for arranging garden paths.

The 3D crocodile shape gives this mold a clear animal-statue purpose, while the stated plaster-and-concrete compatibility leaves room to choose between the listed casting materials. BETONEX also says it can produce more than 50 tiles for garden paths, which may make it useful for repeated outdoor projects as well as a single display piece. Its 2 mm ABS description identifies the mold material and thickness, but the listing gives no finished-statue dimensions.

Skip it if you need a stated finished-statue size before planning a display; SvitMolds D72 lists a 15.16-inch diameter.

Pick the BETONEX crocodile mold if you want an animal figure and may also cast repeated garden-path pieces. It supports plaster and concrete, but the missing finished dimensions matter when you need a precisely sized display.

Listed on Amazon as: 3D Mold Casting Crocodile Decorative Concrete Mold Cement Plastic ABS 2mm – Concrete Molds and Forms Animals Reusable – Crocodile Statue for Garden

#3 · Large Gnome Mold

3. BETONEX Gnome Welcome Mold

• Material: Cement
• Material Type: Cement
• Dimensions: 22.4 x 11.8 x 2.3 in

Best for: First-time gnome casters.

Why it ranks #3: Its listed 22.4-by-11.8-by-2.3-inch dimensions suit a sizeable gnome welcome design, and the listing describes casting concrete or plaster.

A welcome-themed gnome mold is presented as easy to make with simple instructions and no experience needed, making it a direct entry point for first-time concrete décor casting. BETONEX lists plaster and concrete compatibility and gives the form’s dimensions as 22.4 × 11.8 × 2.3 inches.

The listed 22.4 × 11.8 × 2.3-inch dimensions help makers judge the project’s footprint before choosing a casting and display area. BETONEX says the reusable mold works with plaster and concrete, giving buyers two stated material options, and describes the process as requiring no experience with simple instructions. The welcome gnome subject is suited to a garden greeting, while the stated potential to produce more than 50 path tiles adds a repeated-use option beyond the statue.

Skip it if you require a stated mold material and thickness; SvitMolds D72 specifies ABS plastic at 1.9–2 mm.

This BETONEX form suits beginners who want a welcome gnome and value listed instructions alongside plaster-or-concrete casting. Check that its 22.4 × 11.8-inch footprint suits your planned workspace and display area.

Listed on Amazon as: Cement Garden Statues Gnome Mold Concrete Molds ABS 2mm – Dwarf Casting Cement Mold – DIY Garden Concrete Form

#4 · Long Snake Design

4. SvitMolds Snake Mold

• Material: ABS Plastic
• Material Type: ABS Plastic

Best for: Large snake sculpture casters.

Why it ranks #4: The reusable ABS mold is specified for concrete and plaster and makes a snake sculpture with a listed 15.16-inch diameter.

A 15.16-inch-diameter rattlesnake form makes this SvitMolds mold a substantial animal-sculpture option, with a stated thickness range of 1.77–2.76 inches shaping its profile. Reusable ABS construction and compatibility with plaster and concrete support repeated casting in either listed material.

The 385 mm diameter gives buyers a clear sense of the snake sculpture’s overall span, while the 45–70 mm thickness range signals variation in its profile. SvitMolds specifies 1.9–2 mm ABS plastic and says the mold is reusable, helping makers plan repeated concrete or plaster casts. Its care guidance says to protect it from harsh weather and prolonged water contact, then dust or wipe clean, so storage and maintenance should be considered after use.

Skip it if you need a mold intended for prolonged wet outdoor storage; SvitMolds advises protecting this one from water contact.

This SvitMolds snake form suits makers seeking a large, reusable animal sculpture mold for plaster or concrete. Its stated care guidance calls for protection from harsh weather and prolonged water contact, so plan indoor storage between casts.

Listed on Amazon as: SvitMods Mold Snake DIY Concrete Cement Mould Rattlesnake Statue for Garden Garden Decor D72

#5 · Compact Animal Mold

5. BETONEX Frog Mold

• Material: Plastic
• Material Type: Plastic
• Dimensions: 5 x 8 x 8 in

Best for: Small frog stepping-stone makers.

Why it ranks #5: This small frog design is listed at 5 by 8 by 8 inches and is described as a reusable mold for garden décor and stepping-stone projects.

A compact frog shape links this BETONEX mold to both garden-statue casting and DIY stepping-stone décor, giving small-animal projects a clear use. The listing supports plaster and concrete casting and gives the mold dimensions as 5 × 8 × 8 inches.

The frog subject suits makers looking for an animal accent, while the product description also identifies paving and stepping-stone décor as uses. BETONEX lists plaster and concrete casting, so buyers can select between those stated materials for their project. At 5 × 8 × 8 inches, the given dimensions help with workspace and placement planning. The listing says it can produce more than 50 tiles for arranging paths, though it does not state a finished frog’s dimensions separately.

Skip it if you need a stated finished-figure size for precise placement; AUTUMN hippo lists a 12 × 6 × 3-inch size.

This BETONEX mold fits makers interested in a frog-themed garden accent or stepping-stone project, with plaster and concrete both listed. Use the 5 × 8 × 8-inch dimensions as your planning reference, since finished-figure dimensions are not separately given.

Listed on Amazon as: 3D Frog Shape Concrete Mold Cement Plastic ABS 2mm – Small Frog Mold for Cement – Paving DIY Stepping Stone Decor Garden

#6

6. SvitMolds Animal Head Plaque

• Material: Plastic
• Material Type: Plastic
• Dimensions: 11 x 12 x 4 in

Best for: Animal-head plaque casters.

Why it ranks #6: The D61 animal-head plaque measures 13.58 by 10.82 by 2.95 inches and can be cast in concrete or plaster for use as a decorative element.

This SvitMolds form is specifically a 2D animal-head plaque mold, giving garden makers a wall- or surface-oriented alternative to a full-bodied statue. The listing names plaster and concrete as compatible casting materials and describes the mold as 1.9–2 mm ABS plastic.

The D61 dimensions are listed as 13.58 × 10.82 × 2.95 inches, providing a useful reference for sizing a head-shaped garden accent. The mold is also described for plaster and concrete, so the same form can serve outdoor concrete décor or plaster decorative elements. Its 2D plaque format keeps the project focused on a relief rather than a deep figure. The supplied verified facts also note that concrete is used for a yard lion, while plaster suits indoor use.

Skip it if you want a full-bodied animal figure rather than a relief plaque; BETONEX crocodile mold is listed as a 3D shape.

Choose the SvitMolds animal-head form if a relief plaque fits your garden display better than a full figure. Its D61 measurements and plaster-or-concrete compatibility help with planning, but the shallow plaque format is the defining boundary.

Listed on Amazon as: Mold 2D DIY Plaque Head Animals Garden Decor Mold Concrete Mould Form Garden Figure (D61)

#7

7. AUTUMN Lion's Head Mold

• Material: Plastic
• Material Type: Plastic

Best for: Lion-face plaque projects.

Why it ranks #7: This plastic lion-face plaque mold is expressly presented for garden décor, though the listing provides no dimensions or casting-use details.

A lion’s-head face form gives this AUTUMN mold a clear, recognizable subject for garden décor, making it a focused choice for makers planning a feline plaque. The listing specifies plastic construction, while the title identifies concrete cement plaque casting and an outdoor décor use.

The lion-face subject distinguishes this mold from full-bodied animal forms and suits a plaque-style garden feature. Its title specifically describes a concrete cement plaque mold, connecting the form to a defined casting purpose. Plastic is the listed material, which helps buyers identify the mold type before planning a project. The supplied specifications do not give dimensions or care instructions, so buyers cannot use this listing to plan a precise footprint or a particular cleaning routine.

Skip it if you need dimensions before choosing a display location; AUTUMN koi mold lists an 11.5 × 6 × 2.75-inch size.

This AUTUMN lion-face mold suits buyers seeking a concrete plaque with a recognizable animal motif for outdoor décor. Its plastic construction is specified, but the listing provides no dimensions, so precise placement planning requires another reference.

Listed on Amazon as: AUTUMN Lion's Head Garden Decor Mold, Concrete Cement Plaque Mold, Lion's Face Form for Garden Figure, DIY Outdoor Décor

#8

8. BETONEX Face Tree Mold

• Material: Wood
• Material Type: Wood
• Dimensions: 14.96 x 13.38 x 2.36 in

Best for: Tree-face garden accents.

Why it ranks #8: The old-man tree-face design offers a distinctive garden feature and lists 14.96-by-13.38-by-2.36-inch dimensions, but its material details are unclear.

A face designed around an old-man tree or wood-spirit motif gives this BETONEX mold a distinctive fit for tree-themed garden décor. The listing describes casting with plaster and concrete and gives dimensions of 14.96 × 13.38 × 2.36 inches, useful when planning a display or project area.

The old-man tree, wood-spirit, and Green Man references make this a face plaque concept rather than a conventional animal statue. BETONEX lists both plaster and concrete casting, allowing the maker to choose between the specified materials. Its 14.96 × 13.38 × 2.36-inch dimensions provide a footprint for planning placement, and the listing says it can produce more than 50 path tiles. The listed material is wood, so confirm that this stated material matches your mold requirements.

Skip it if you require an ABS or plastic mold; SvitMolds D72 specifies ABS plastic at 1.9–2 mm.

Choose this BETONEX face mold if a tree-spirit or Green Man motif suits your garden more than an animal figure. Its listed dimensions aid placement planning, while the wood material specification is an important fit consideration.

Listed on Amazon as: Face Tree Planter Mold – Concrete Gargoyle, Garden Gnome, Green Man Face Plaque

#9

9. AUTUMN Hippo Mold

• Material: Plastic
• Material Type: Plastic
• Dimensions: 12 x 6 x 3 in

Best for: Compact hippo figure projects.

Why it ranks #9: The hippo is explicitly intended as a garden figure and lists 12-by-6-by-3-inch dimensions, but the listing lacks casting and reuse details.

A hippo-shaped garden mold gives this AUTUMN form a specific animal subject for DIY outdoor décor, rather than a generic plaque or path tile. Its listed 12 × 6 × 3-inch dimensions let makers assess the mold’s footprint and depth when planning a small figure project.

The product title identifies a hippopotamus garden figure, so it targets buyers who want an animal motif in their outdoor décor. Its 12 × 6 × 3-inch dimensions provide a practical scale reference for planning a casting station and choosing a display spot. The listed material is plastic, a useful fact when selecting and handling the mold. No casting-material compatibility or reuse details are supplied here, so buyers should base their choice on the stated subject, dimensions, and material.

Skip it if you need explicit plaster-or-concrete compatibility before choosing a mold; BETONEX crocodile mold lists both materials.

Consider this AUTUMN mold if a hippo is the animal figure you want and its 12 × 6 × 3-inch size suits your project. The listing does not state compatible casting materials, a key boundary for material-specific planning.

Listed on Amazon as: AUTUMN Hippo Garden Decor Mold, Concrete Cement Mold, Hippopotamus for Garden Figure, DIY Outdoor Decor, Hippo Statue for Garden

#10

10. AUTUMN Koi Fish Mold

• Material: Plastic
• Material Type: Plastic
• Dimensions: 2.75"D x 6"W x 2.75"H

Best for: Two-fish garden décor makers.

Why it ranks #10: The listing includes two fish molds and gives an 11.5-by-6-by-2.75-inch size, but it offers less detail about concrete casting and statue use.

One listed set includes two fish molds, making this AUTUMN koi-themed option useful when a garden display calls for a pair rather than a single animal form. The plastic molds measure 11.5 × 6 × 2.75 inches, giving buyers a size reference for casting and placement.

The title identifies koi garden décor, and the included-components field specifies two fish molds, supporting a paired display concept. The listed 11.5 × 6 × 2.75-inch size gives a footprint for arranging the figures in a garden setting. Plastic is the stated material. Care instructions call for gentle cleaning with damp cloth and mild soap and caution against abrasive cleaners or high-pressure sprays, helping preserve the mold during routine cleanup.

Skip it if you want a single large animal sculpture rather than a pair of fish; BETONEX crocodile is listed as a 3D garden figure.

Pick this AUTUMN set if two koi-themed fish fit your garden arrangement and the listed 11.5 × 6 × 2.75-inch size works for your project. Follow its gentle-cleaning guidance and avoid abrasive or high-pressure cleaning.

Listed on Amazon as: AUTUMN Fish Koi Garden Decor Mold, Concrete Cement Mold, DIY Outdoor Decor, Koi Statue for Garden. One Mold – 2 Fish