Best Power Steering Pump Valve for GM, Nissan and Toyota

#1 · Best Overall

1. GM Genuine Parts 26065843

• Weight: 1.28 oz

Best for: GM Genuine Parts replacement.

Why it ranks #1: GM says this control valve is engineered and tested to rigorous standards and validated for GM vehicles; the listing identifies part number 26065843.

GM engineering and validation for Chevrolet, Buick, GMC, and Cadillac vehicles distinguish this Genuine Parts flow control valve. It is aimed at owners seeking a GM-backed component for a compatible vehicle, with the listing describing it as an original-equipment part installed during production or validated by General Motors.

GM says its engineers design and validate OE parts specifically for Chevrolet, Buick, GMC, and Cadillac vehicles, providing a manufacturer-specific basis for choosing this valve. Its stated role is power steering pump flow control, while the GM Original Equipment model designation supports an OE-oriented replacement workflow. The compact 2 by 1.3 by 0.9-inch dimensions and 1.28-ounce weight may help when planning handling and installation access. The listing does not identify individual vehicle years or models.

Skip it if you need a documented 3-to-2 GPM change for a Mustang II rack; Speedway Motors 91032918 lists that flow reduction and application.

Consider this part when a GM Genuine Parts flow control valve is the priority for a Chevrolet, Buick, GMC, or Cadillac. Because the supplied details omit model-year fitment, verify vehicle-specific application information before ordering.

Listed on Amazon as: GM Genuine Parts 26065843 Power Steering Pump Flow Control Valve

#2 · Best 2 GPM Option

2. Speedway Motors 91032959

• Weight: 1 lb

Best for: AN-6 Mustang II plumbing.

Why it ranks #2: Designed for GM Saginaw Type I pumps with Mustang II racks, it reduces output from 3 GPM to 2 GPM and provides an AN 6 outlet.

This Speedway Motors valve combines a defined 3-to-2 GPM reduction with an AN-6 pump outlet, giving Mustang II rack builders a flow-control part that also accommodates braided pressure hoses without an adapter. It is specified for GM Saginaw Type I pumps and addresses over-boosted or sensitive steering.

Reducing Saginaw pump output from 3 GPM to 2 GPM is intended to improve steering feel and address an over-boosted or sensitive setup. The valve is specified for GM Saginaw Type I pumps paired with Mustang II rack-and-pinion steering, so its application is focused rather than general. Its AN-6 outlet converts the pump outlet for braided pressure hoses without an adapter, which can simplify that plumbing choice. Stainless-steel construction and precision machining are also stated.

Skip it if you need a 5/8-18 inverted-flare hose option for a Ford-style rack; JEGS 555-60791 lists that connection alongside -6 AN.

A strong application match for a builder combining a GM Saginaw Type I pump with a Mustang II rack and AN-6 braided pressure hose. Its defined flow reduction and outlet conversion are useful, but the stated steering setup is specific.

Listed on Amazon as: Compatible with Mustang II Power Steering Valve, GM Pump, 6AN, Stainless, 2 GPM

#3 · Best Hose Flexibility

3. JEGS 60791 Flow Valve

• Material: Metal
• Weight: 4 oz
• Material Type: Metal

Best for: Saginaw pump and Ford rack.

Why it ranks #3: Fits most GM Saginaw-style pumps and works with 5/8-18 inverted flare or -6 AN high-pressure hoses for Ford-style racks.

Compatibility with most GM Saginaw-style power steering pumps makes this JEGS valve useful for a common mixed-component setup: a GM-style pump feeding a Ford-style rack and pinion. It is recommended for Mustang and Thunderbird-style racks and specifies hose options, helping builders assess the plumbing before installation.

The valve reduces flow when a GM-style pump is paired with a Ford-style power rack and pinion, a combination the listing identifies as its intended use. Its recommendation for Mustang and Thunderbird-style racks narrows the target application, while compatibility with most GM Saginaw-style pumps defines the pump side. Specified 5/8-18 inverted flare or -6 AN high-pressure hose options give builders concrete plumbing choices. The metal construction and 4-ounce weight provide additional component details.

Skip it if you need a specified 3-to-2 GPM flow change; Speedway Motors 91032918 states that reduction for GM-pump and Mustang II setups.

A practical match for builders using a GM Saginaw-style pump with a Mustang or Thunderbird-style rack, especially when the listed hose choices suit the plumbing. Flow reduction is stated, but no resulting GPM figure is provided.

Listed on Amazon as: Power Steering Flow Control Valve, Most GM Saginaw-Style PS Pumps

#4 · GM OE Replacement

4. GM Genuine Parts 19168825

• Material: Metal
• Weight: 8.32 oz
• Material Type: Metal

Best for: GM OE actuator replacement.

Why it ranks #4: GM identifies it as a genuine control valve designed for GM vehicles, and its listing includes a 24-month limited parts warranty.

GM engineering and validation for Chevrolet, Buick, GMC, and Cadillac vehicles make this Genuine Parts actuator the OE-oriented choice in this group. The listing identifies it as a power steering fluid flow control valve actuator and includes a power steering hose adapter, supporting a component-specific repair approach.

GM says its engineers design and validate parts for its named vehicle makes, giving this actuator a manufacturer-backed OE context for compatible GM applications. Its stated role as a power steering fluid flow control valve actuator identifies the replacement component, and the included power steering hose adapter is relevant to the repair workflow. The metal construction and listed 6.5 by 4.25 by 4.25-inch dimensions provide handling and packaging-planning details. The supplied listing does not enumerate vehicle years or models.

Skip it if you need listed vehicle years, engine sizes, and brake codes for this actuator; usvehj 926-049 provides those application details for selected GM vehicles.

This actuator fits the OE-focused buyer maintaining a compatible Chevrolet, Buick, GMC, or Cadillac and needing the named flow-control component with hose adapter. Since exact vehicle applications are not listed here, confirm the application through vehicle-specific information.

Listed on Amazon as: GM Genuine Parts 19168825 Power Steering Fluid Flow Control Valve Actuator

#5

5. Speedway Motors 91032918

• Weight: 1.58 oz

Best for: Mustang II steering correction.

Why it ranks #5: This valve addresses oversensitive steering with early GM pumps and Mustang II racks by reducing flow from 3 GPM to 2 GPM.

Reducing GM-pump flow from 3 GPM to 2 GPM is the key feature of this Speedway Motors valve, helping address twitchy or darting steering in Mustang II rack-and-pinion applications. It targets builders adapting an early GM power steering pump to a power rack who want a more controlled steering response.

This valve is specified for GM pumps used with a Mustang II power rack and pinion, directly addressing the combination associated with oversensitive steering in the listing. Its reduction from 3 GPM to 2 GPM gives the buyer a defined flow change intended to make steering smoother and more controlled. At 2 by 1 by 1 inches and 1.58 ounces, it is a small, light component for a steering-system installation. The listing does not provide hose connection details.

Skip it if you need a stated AN-6 outlet for braided pressure hose; Speedway Motors 91032959 specifies that connection and the same 3-to-2 GPM reduction.

This valve suits a builder pairing a GM pump with a Mustang II power rack who wants the listed 3-to-2 GPM flow reduction. Check your hose connection requirements, since this listing gives no connection specification.

Listed on Amazon as: Mustang II Power Steering Flow Valve For GM Pump, Reduced Flow

#6

6. usvehj 19168825 Actuator Kit

• Material: Stainless Steel
• Material Type: Stainless Steel

Best for: GM actuator kit replacement.

Why it ranks #6: The kit lists replacement numbers 19149488, 19168825, and 926-049, with stated applications including select Chevrolet and GMC vehicles.

A direct-fit replacement claim tied to three reference numbers—19149488, 19168825, and 926-049—makes this actuator kit useful for GM owners matching an existing part identifier. Its listed applications include several Chevrolet and GMC vehicles, with engine and brake-code details in the supplied coverage.

The kit is described as matching original specifications for a factory steering pump system and allowing direct replacement without modification, which can simplify a like-for-like repair when the application matches. Its reference numbers provide multiple ways to identify the part, while the application examples cover vehicles such as Astro, Safari, Silverado, Tahoe, Sierra, Yukon, and Suburban. The listing specifies stainless steel and includes a control valve actuator kit. Vehicle coverage includes particular years, engines, and JB5 or JB6 codes.

Skip it if you need a GM-backed original-equipment actuator; GM Genuine Parts 19168825 is identified as a GM Genuine Parts control valve actuator.

This kit suits owners whose GM vehicle and listed engine or brake-code combination match and who are replacing the referenced actuator. The direct-fit claim applies to the stated factory-pump applications, so compare the vehicle details carefully.

Listed on Amazon as: 19168825 Power Steering Fluid Flow Control Valve Actuator Kit

#7

7. Generic Nissan Patrol Solenoid

• Material: Alloy Steel
• Weight: 0.4 kg
• Material Type: Alloy Steel

Best for: Nissan Patrol valve replacement.

Why it ranks #7: This alloy-steel booster-pump solenoid is described for Nissan Patrol models and lists a six-month manufacturer warranty.

Its stated original-function replacement for Nissan Patrol steering booster pumps makes this valve a focused option for restoring the listed pump-valve role. The alloy-steel body and mechanical operation give buyers concrete construction and operating details, while the listing identifies the Patrol rather than a broad range of vehicle applications.

The listing describes the valve as new and says it can be used directly with the same function as the original, which points toward a replacement workflow rather than a modified steering setup. Its alloy-steel body supplies the stated material detail, and the mechanical operating mode identifies how it works. The 0.25-inch outlet connection is another useful specification to check against the existing installation. Vehicle coverage is presented for Nissan Patrol applications, so the stated fit range is narrow.

Skip it if you need a flow-reduction valve for a GM pump and Mustang II rack; Speedway Motors 91032918 is specified for that setup.

Choose this valve if you are replacing the steering booster pump solenoid valve on a Nissan Patrol and want the stated original-function role. Its application is Patrol-focused, so buyers with other vehicle or pump setups should look elsewhere.

Listed on Amazon as: fit for All Nissan power Steering Booster Pump Solenoid Valve Part for Patrol car power steering valve

#8

8. Generic Nissan Booster Solenoid

• Weight: 1.32 lb

Best for: Nissan booster pump valve.

Why it ranks #8: The listing names Nissan Qashqai, Trail, Bluebird, Sylphy, Teana, and Tiida fitment, but does not specify a part number.

Its named Nissan coverage—including Qashqai, Bluebird, Sylphy, Teana, and Tiida—sets this booster pump solenoid valve apart for owners searching within those model lines. The listing says it controls hydraulic-fluid flow to the steering booster pump and describes a direct-fit design for installation.

This valve's stated function is controlling hydraulic-fluid flow to the steering booster pump, connecting the part to the steering system's booster operation. The listed Nissan models provide a useful initial fitment screen, and the direct-fit description indicates an intended replacement workflow without modification. The supplied description also names the Teana, while the broader title repeats that application. No model years, engine sizes, or connection dimensions are provided, so buyers should use the named model coverage as the available application detail.

Skip it if you need a Nissan Patrol-specific replacement with an original-function claim; Generic patrol valve B0D8WDWP66 is listed for Patrol applications.

Consider this valve when your Nissan belongs to one of the named model lines and you need the stated booster-pump solenoid function. The listing provides no year or engine breakdown, making those details a fitment boundary.

Listed on Amazon as: Power Steering Booster Pump Solenoid Valve Fit for Qashqai Trail Bluebird Sylphy TeanaTiida For teana

#9

9. A-Premium 17630-16040 Valve

• Material: Stainless Steel
• Material Type: Stainless Steel

Best for: Toyota and Lexus fitment.

Why it ranks #9: This stainless-steel vacuum air-control valve lists numerous Toyota applications and Lexus GS models, rather than a general GM pump fit.

A long, explicitly named Toyota and Lexus application list is the defining feature of this A-Premium vacuum power steering air control valve. It covers selected 4Runner, Camry, Celica, and other models alongside several Lexus GS variants, giving owners specific vehicle and engine details to compare against their repair.

The fitment list spans selected Toyota models including 4Runner, Camry, Celica, Corolla GTS, Land Cruiser, Tundra, and others, with engine sizes and application years stated for each. Lexus coverage also names GS300, GS400, and GS430 variants with corresponding years and engines. That specificity can help narrow a replacement search before installation, while the stainless-steel material identifies the valve's stated construction. Buyers should compare their exact vehicle and engine against the supplied application list.

Skip it if you need GM flow control for a Saginaw pump and Mustang II rack; JEGS 555-60791 is listed for that steering combination.

This valve is for owners whose Toyota or Lexus vehicle and engine appear in the supplied fitment list and who need the named vacuum air-control function. Check the listed years and engine sizes against your application.

Listed on Amazon as: A-Premium Vacuum Power Steering Air Control Valve

#10

10. Sonzrod 17630-16040 Valve

• Material: Acrylonitrile Butadiene Styrene (ABS), Zinc
• Material Type: Acrylonitrile Butadiene Styrene (ABS), Zinc

Best for: Toyota vacuum valve replacement.

Why it ranks #10: It identifies Toyota 17630-16040 compatibility and an ABS-and-zinc construction, but its vacuum control-valve type is more specialized than a general pump valve.

The 17630-16040 designation identifies this Sonzrod vacuum valve for buyers searching by a specific Toyota-style replacement number. Its supplied compatible-vehicle title names 4Runner, Camry, and Celica among the applications, while the ABS-and-zinc construction and connection dimensions add practical details for planning the replacement.

Sonzrod identifies the part as a power steering pump vacuum valve and includes a matching 17630-16040 model and part number, making number-based replacement searches straightforward. The compatible-vehicle title names Toyota 4Runner, Camry, and Celica, although the supplied details do not expand that list into years or engine sizes. Its ABS-and-zinc materials and 3.66 by 1.18 by 1.18-inch dimensions help buyers assess the component's construction and space requirements. Inlet and outlet connections are both listed as 1.18 inches.

Skip it if you need an extensive Toyota and Lexus year-and-engine list; A-Premium 1763016040 supplies those application details for numerous named models.

Choose this Sonzrod valve when the 17630-16040 identification and the named Toyota applications match your repair. Its dimensions and equal connection-size specifications help with planning, but the supplied fitment details lack years and engine sizes.

Listed on Amazon as: 17630-16040 Power Steering Pump Vacuum Valve, Compatible with Toyota 4Runner, Camry, Celica and More for Enhanced Vehicle Performance