Best Semi Truck Pintle Hitch Plate for Work Trucks

#1 · Best Overall

1. Buyers Products 1809080

• Weight: 120.2 lb
• Material: Carbon Steel
• Compatible with Vehicle Type: Trailer, Truck

Best for: 2019-plus cab-and-chassis trucks.

Why it ranks #1: Its listed fit covers GMC, Chevy and International 4500HD–6500HD cab-and-chassis trucks, with 20,000 MGTW and four pintle mounting positions.

Four pintle-hook mounting positions and an integrated trailer-connector location make the Buyers Products 1809080 a ready-to-use plate for specified GMC, Chevy, and International chassis trucks. The listing calls for a nominal 34-inch frame width and states a 20,000 MGTW rating, narrowing the fit and capacity checks.

The plate is specified for cab-and-chassis trucks with a nominal 34-inch frame width, and its 2019-and-newer GMC, Chevy, and International 4500HD–6500HD application identifies the intended vehicle range. Four pintle mounting positions let users select among attachment locations, while the built-in connector location and pre-punched hole support trailer-electrical installation. Two forged D-rings provide safety-chain attachment points. A 20,000 MGTW rating and corrosion-resistant black powder-coated finish round out the stated operating details.

Skip it if you have a RAM 3500–5500; Buyers Products 1809079 is listed for that truck range.

This suits owners of specified 2019-and-newer GMC, Chevy, or International cab-and-chassis trucks who need a 20,000 MGTW plate with chain and connector provisions. Its nominal 34-inch frame-width requirement is a key fit boundary.

Listed on Amazon as: Buyers Products 1809080 Hitch Plate with Pintle Mount for GMC/Chevy/International 4500HD-6500HD (2019+), Bottom Channel Position, 20,000 MGTW, Pintle Hook Hitch Plate

#2 · Best for RAM Chassis

2. Buyers Products 1809079

• Weight: 127.1 lb
• Material: Carbon Steel
• Compatible with Vehicle Type: Trailer, Truck

Best for: RAM 3500–5500 chassis installations.

Why it ranks #2: This ready-to-use plate is designed for RAM 3500–5500 trucks and lists a 20,000 MGTW rating, forged D-rings and multiple pintle positions.

Multiple pintle mounting positions, forged D-rings, and a pre-punched electrical opening make the Buyers Products 1809079 a feature-rich plate for RAM 3500–5500 trucks. It is listed in the bottom-channel position and described as ready to use with little or no fabrication, supporting a more direct installation workflow.

The pre-fabricated 1/2-inch carbon-steel plate includes multiple pintle-hook mounting positions, allowing a choice of attachment height or position, while two forged D-rings provide dedicated safety-chain connection points. A pre-punched hole fits most trailer electrical connectors, avoiding the need to form that opening as part of installation. The listing identifies the RAM 3500–5500 application and bottom-channel placement; at 127.1 pounds, handling and installation planning matter. The product is the hitch plate, not a separately listed truck-independent mount.

Skip it if you need a plate listed for GMC, Chevy, or International 4500–6500 trucks; Buyers Products 1809080 names those chassis.

This is for RAM 3500–5500 owners seeking a bottom-channel plate with chain and connector provisions and little fabrication. Its application is specific, and the 127.1-pound plate calls for installation handling.

Listed on Amazon as: Buyers Products 1809079 Hitch Plate with Pintle Mount for RAM 3500-5500, Bottom Channel Position, 20,000 MGTW, Pintle Hook Hitch Plate, Dodge Truck Towing Accessories

#3 · Receiver Plate Pick

3. Buyers Products 1809085

• Weight: 125.3 lb
• Material: Carbon Steel
• Compatible with Vehicle Type: Truck

Best for: GMC and Chevy chassis installers.

Why it ranks #3: The 1/2-inch plate has a 2.5-inch receiver, two forged D-rings and a pre-punched connector hole; its title identifies GMC, Chevy and International 4500–6500 models.

A pre-punched electrical-connector opening and two forged D-rings make this Buyers Products hitch plate a ready-to-use towing interface. Its title specifies GMC, Chevy, and International 4500–6500 trucks from 2019 onward, with the bottom-channel position and a 2.5-inch receiver tube called out for configuration-conscious buyers.

The 1/2-inch-thick carbon-steel plate combines an attached 2.5-inch receiver tube with forged D-rings, giving safety chains dedicated attachment points while the receiver serves compatible towing equipment. A pre-punched opening fits most trailer electrical connectors, reducing the need to create that opening during installation. The listing states a 20,000 MGTW rating and identifies a bottom-channel position. Its stated truck application is specific, so check that chassis and channel configuration against the intended installation.

Skip it if you have a RAM 3500–5500; Buyers Products 1809079 is the listed hitch plate for that truck range.

This suits operators with a matching GMC, Chevy, or International 4500–6500 chassis who want receiver, chain, and connector provisions on one plate. Its bottom-channel placement and stated vehicle application limit where it fits.

Listed on Amazon as: Buyers Products 1809085 Hitch Plate with 2-1/2 Inch Receiver for GMC/Chevy/International 4500-6500 (2019+), Bottom Channel Position, 20,000 MGTW, Pintle Hook Hitch Plate

#4 · Solid Shank Pick

4. Rigid Hitch RPM-1225-S

• Weight: 32 lb
• Material: Alloy Steel

Best for: Solid-shank pintle and ball users.

Why it ranks #4: Its 2.5-inch solid shank and 16,000-pound gross towing weight capacity suit heavy-duty receiver setups, with a 7-inch plate and stated ball-or-pintle mounting.

A 2.5-inch solid shank and 7-inch mounting plate give the Rigid Hitch RPM-1225-S a substantial mounting format for pintle or ball-and-pintle hardware. Its listed capacity is 16,000 pounds gross towing weight and 1,600 pounds tongue weight, useful figures for matching the plate to an application.

The solid 2.5-inch shank fits a matching receiver, while the 7-inch plate provides mounting options for rigid pintle hooks or ball-and-pintle setups using a 1-3/4-by-3-3/8-inch bolt pattern. The stated 16,000-pound gross towing weight and 1,600-pound tongue weight help buyers compare its limits with the trailer and load. Alloy-steel construction and a black powder-coat finish are specified, with the coating described as durable. At 32 pounds, the mount's listed weight matters when handling it during installation.

Skip it if you need a listed 20,000-pound capacity; the metlead 11036539 pintle mount specifies that higher figure.

Pick this plate if your receiver is 2.5 inches and you want the stated bolt pattern for rigid pintle or ball-and-pintle hardware. Its 16,000-pound gross rating and 1,600-pound tongue limit are key boundaries.

Listed on Amazon as: Rigid Hitch Pintle Mount Plate, 2-1/2 Inch Solid Shank, 16,000 lbs Capacity, Black Powder Coat Finish, 7 Inch Plate, Made in USA (RPM-1225-S)

#5 · Six-Position 2.5-Inch

5. CURT 48349

• Material: Alloy Steel
• Compatible with Vehicle Type: Trailer, Truck

Best for: Heavy-duty 2.5-inch receiver owners.

Why it ranks #5: This pintle mount fits a 2.5-inch receiver and offers six height positions, making it useful when receiver fit and trailer leveling take priority.

A 2.5-inch receiver shank paired with six height positions makes the CURT 48349 a leveling option for larger receiver setups. It mounts CURT adjustable pintle hooks or ball-and-pintle combinations, giving truck and trailer owners multiple coupling-height choices without changing the stated accessory pattern.

The 2.5-by-2.5-inch shank is specified for a matching receiver, and the six-position adjustment lets users choose a height that better aligns the trailer. Face-plate holes spaced 1-3/4 inches high by 3-5/16 inches wide accept CURT adjustable pintle hooks or ball-and-pintle combinations. Alloy-steel construction is specified for the mount, which is listed for trucks and trailers. The product details provide no towing-capacity rating, so capacity-sensitive buyers need that information before selecting it.

Skip it if you require a stated towing-capacity rating; the Buyers Products 1809080 lists a 20,000 MGTW figure.

This fits buyers who have a 2.5-inch receiver and want six height settings for a CURT pintle or combination hitch. Confirm the receiver and accessory pattern, and note that this listing gives no capacity figure.

Listed on Amazon as: CURT MFG 48349

#6

6. metlead Pintle Hook Mount

• Weight: 18 lb
• Material: Carbon Steel

Best for: 2.5-inch receiver capacity seekers.

Why it ranks #6: It fits a 2.5-inch receiver and lists 20,000 pounds towing capacity, but the supplied information does not identify a semi-truck-specific vehicle fit.

A stated 20,000-pound towing capacity sets the key selection point for this metlead pintle mount. Its 2.5-inch shank fits industry-standard 2.5-inch receivers, while the 12.5-inch plate height provides the listed mounting format for buyers seeking a solid-steel mount with a protective carbide powder coat.

The 2.5-by-2.5-inch shank fits standard 2.5-inch receivers without extra modifications, according to the listing, which can simplify pairing it with a matching hitch. Its one-piece solid-steel construction is rated to 20,000 pounds, giving capacity-conscious buyers a concrete stated limit to check against their towing needs. The carbide powder coating is described as resisting chipping, scratches, and rust, supporting protection through exposure to rain and snow. The listed package is a pintle mount, not a complete hook assembly.

Skip it if you need multiple height settings for trailer leveling; the CURT 48349 provides six positions for a 2.5-inch receiver.

Consider it if you need a 2.5-inch receiver mount with a stated 20,000-pound capacity and a coating intended to resist surface wear. Its fixed plate format is a boundary for buyers who need adjustable height.

Listed on Amazon as: Pintle Hook Hitch Mount, Fits 2-1/2" Trailer Hitch Receivers

#7

7. Buyers Products PM25812

• Weight: 11.1 lb
• Material: Carbon Steel
• Compatible with Vehicle Type: Trailer, Truck

Best for: Height-adjustable 2.5-inch receiver users.

Why it ranks #7: Its carbon-steel mount fits a 2.5-inch receiver and offers high or low pintle positions, though the listing provides no capacity figure.

Three mounting positions let this Buyers Products plate place a pintle hook high or low to suit trailer height. Its 2.5-inch receiver shank is the key fit requirement, making it a straightforward option for truck or trailer owners who need adjustable pintle mounting rather than a complete hitch assembly.

The 2.5-inch receiver fit lets the mount slide into a matching receiver, while the plate accepts a variety of pintle hooks and combination hitches. High- or low-position mounting helps accommodate differences in trailer height, so the towing connection can be set more appropriately for the load. Carbon steel construction provides the stated material choice, and the included component is the pintle hook mount itself; the pintle hook or combination hitch is not listed as included.

Skip it if you need a stated capacity rating before choosing a mount; this listing supplies none for the PM25812.

Choose it if your truck or trailer has a 2.5-inch receiver and you want to adjust pintle-hook height for trailer leveling. It supplies the mount, not a pintle hook, and no capacity figure is stated.

Listed on Amazon as: Buyers Products PM25812 3-Position Pintle Mount for 2.5 Inch Receiver

#8

8. B&W PMHD14004

• Weight: 5 lb
• Material: Alloy Steel
• Compatible with Vehicle Type: Trailer

Best for: Compact six-position pintle setups.

Why it ranks #8: The 2-inch-shank pintle mount lists 16K capacity and six positions, but its smaller receiver size makes it less suitable for many heavy truck setups.

Six positions across a 14-hole plate give this B&W mount adjustment options in a 13-inch, 2-inch-shank format. Its stated 16,000-pound capacity makes it a defined choice for buyers with a matching receiver and pintle setup who need to set coupling height rather than use a fixed mount.

The 2-inch shank is the receiver size to match, while the 14-hole, six-position plate provides multiple mounting heights for setting the trailer connection. B&W lists a 16,000-pound capacity, giving buyers a specific rating to compare with their towing requirements. Alloy-steel construction is specified, and the 13-inch shank length describes the mounting reach. The product is listed as a pintle mount; the supplied details do not identify a pintle hook as included, so plan around the mount itself.

Skip it if you need a listed 20,000-pound capacity; the metlead 11036539 pintle mount specifies that rating.

This suits buyers matching a 2-inch receiver who want six positions and a clearly stated 16,000-pound capacity. Keep that rating and the 13-inch shank in mind when matching the mount to the towing setup.

Listed on Amazon as: B&W Trailer Hitches 16K Pintle Mount, 2” x 13" Shank, 14-Hole 6-Position – PMHD14004

#9

9. CURT 48341

• Material: Carbon Steel
• Compatible with Vehicle Type: Trailer

Best for: Two-inch receiver leveling setups.

Why it ranks #9: This solid-steel pintle plate offers six height positions and fits a 2-inch receiver, but it is less aligned with the larger receiver options.

Six height positions give the CURT 48341 room to fine-tune trailer leveling from a 2-inch receiver. Its 13-inch plate and 12.5-inch shank suit buyers who want a versatile mount for CURT adjustable pintle hooks or ball-and-pintle combinations, rather than a fixed-height plate.

The 2-by-2-inch shank fits a matching receiver, while six-position height adjustment lets the user select a more appropriate coupling height for the trailer. Face-plate holes spaced 1-3/4 inches high by 3-5/16 inches wide mount CURT adjustable pintle hooks or ball-and-pintle combinations. The solid-steel shank provides the listed construction, and the mount's trailer compatibility makes receiver and accessory matching central to choosing it. The listing does not state a towing-capacity figure.

Skip it if you need a stated capacity rating or a 2.5-inch receiver mount; CURT 48349 fits the larger receiver opening.

Choose this mount for a 2-inch receiver setup where six height choices help level a trailer and CURT pintle accessories are planned. It is not the 2.5-inch version, and no capacity figure is listed.

Listed on Amazon as: Curt Manufacturing 48341 13 in Plate 12 1/2 in Shank

#10

10. CURT 48325

• Weight: 16.8 lb
• Material: Alloy Steel
• Compatible with Vehicle Type: Trailer

Best for: Two-inch receiver drop adjustment.

Why it ranks #10: Its 2-inch receiver fit and three adjustment positions work for general trailer towing, but the listed 15,000-pound capacity and smaller shank rank it last here.

Three height positions and a maximum 6.5-inch drop make the CURT 48325 a practical choice when a trailer needs a lower coupling point. The adjustable mount fits a 2-inch receiver and supports compatible towing accessories, giving buyers a defined way to change vertical alignment rather than settle for one height.

The 2-inch shank fits a matching receiver, while three adjustment positions allow vertical changes for leveling. Its maximum 6.5-inch drop is specified for drop-position use only, so that boundary matters when planning the mount orientation. Face-plate holes spaced 1-3/4 inches high by 3-5/16 inches wide support compatible accessories, and alloy-steel construction is listed. The title states a 15,000-pound rating; match that figure and the drop configuration to the intended towing setup.

Skip it if you need six adjustment positions on a 2.5-inch receiver; the CURT 48349 fits that receiver size and offers six positions.

Choose it when a 2-inch receiver and up to 6.5 inches of drop suit your trailer-leveling needs. Its drop limit applies only in drop position, and its listed capacity is 15,000 pounds.

Listed on Amazon as: CURT 48325 Adjustable Pintle Mount for 2-Inch Hitch Receiver, 15,000 lbs., 6-1/2-Inch Drop, 8-Inch Length